The 68WTM3 is a natural, HDPE Tip-N-Measure Plastic Bottle. The Tip-N-Measure Bottle has a 32 oz capacity, but also includes a separate 4 oz chamber that allows for precise measuring and dispensing. The two chambers both include a 28mm (28-400) opening. The 4 oz dispensing chamber includes a sealed heat induction foil lined child resistant closure. The main chamber also has a 28mm (28-400) thread size, but caps for this opening are sold separately. To use, tip the bottle towards the side with the measuring chamber. Patented fill lines make it easy to transfer a precise quantity to the dispensing chamber. Tip until the desired fluid content (in ounces) is in the measuring chamber. The common applications for this product are concentrated liquids, fertilizer treatments, pest control solutions, food industry, and all liquids needing precise measurement and dispensing.
- Patented fill lines
- Precise measuring and dispensing
- FDA Approved
- 2 chamber bottle
- Caps sold separately
High density polyethylene (HDPE )
is the most commonly used resin. This economical plastic has good impact resistant, is naturally translucent, flexible, and typically used for personal care products, such as shampoo bottles. Adding color will give HDPE an opaque look that will result in an increase in weight and rigidness. We have a variety of these rigid and tough high density polyethylene products in stock, from containers, pails, bottles, caps, tubs, and jugs. HDPE works well in below freezing temperatures. HDPE heat compatibility varies. Generally, it should not be used with products filled at over 145°F.
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility.