Tri-Sure® 2" & 3/4" Zinc Plated Drum Plugs
For use on Steel Drums that have the Tri-Sure Flange. Zinc Plated Plugs have a rust resistant finish. Unplated and Lined Plugs available upon request.

Part# 26WT06 - 2" Zinc Plated Tri-Sure Drum Plug w/ EPDM Gasket
Part# 26WT07 - 3/4" Zinc Plated Tri-Sure Drum Plug w/ EPDM Gasket
Close using Tri-Sure Preset Torque Wrenches #26WTSW or #26WSSW (Sparkless)

Part# 26WT08 - 2" Zinc Plated Tri-Sure Drum Plug w/ BUNA Gasket
Part# 26WT09 - 3/4" Zinc Plated Tri-Sure Drum Plug w/ BUNA Gasket
Close using Tri-Sure Preset Torque Wrenches #26WTSW or #26WSSW (Sparkless)

Part# 26WT00 - 2" Zinc Plated Tri-Sure Drum Plug w/ Polyirradiated Gasket
Part# 26WT01 - 3/4" Zinc Plated Tri-Sure Drum Plug w/ Polyirradiated Gasket
Close using Tri-Sure Preset Torque Wrenches #26WTTS or #26WSTS (Sparkless)

Tri-Sure® Preset Torque wrenches assure proper closure of the drum plug to the drum. We also stock Tri-Sure® Tabseal® & Samba® Capseals for tamper evident protection on the drum . Check out our full line of Tri-Sure® Capseals http://www.thecarycompany.com/containers/closures/capseals.html

Part# 26WT04 - 2" Polypropylene Tri-Sure Drum Plug w/ EPDM Gasket
Part# 26WT05 - 3/4" Polypropylene Tri-Sure Drum Plug w/ EPDM Gasket
Close using Tri-Sure Preset Torque Wrenches #26WTSC or #26WSSC (Sparkless)

Part# 26WP02 - 2" Nylon Tri-Sure Drum Plug w/ EPDM Gasket
Part# 26WP03 - 3/4" Nylon Tri-Sure Drum Plug w/ EPDM Gasket
Part# 26WPN2 - 2" Nylon Tri-Sure Drum Plug w/ 3/4" Reducer & EPDM Gasket
Close using Tri-Sure Preset Torque Wrenches #26WTSC or #26WSSC (Sparkless)

Part# 26WP04 - 2" HDPE Tri-Sure Drum Plug w/ EPDM Gasket
Part# 26WP05 - 3/4" HDPE Tri-Sure Drum Plug w/ EPDM Gasket
Close using Tri-Sure Preset Torque Wrenches #26WTSC or #26WSSC (Sparkless)

Part# 26WST2 - 2" Capseal
Part# 26WST3 - 3/4" Capseal

Part# 56W2TN - 2" (NPS) Polypropylene w/ EPDM Gasket
- National Pipe Threads (NPS)

Part# 56W2TB - 2" (Buttress) Polypropylene w/ EPDM Gasket

Tri-Sure® 2" All-Plastic PUSH-LOCK® Capseals are for use on plastic drums with Tri-Sure® 2" PLASTIPLUG® Drum Plugs.

Part# 26WST4 - 2" All-Plastic PUSH-LOCK® Capseals

The All-Plastic Cap Seal requires no tools for application!

Rieke® 2" VISEGRIP® & VISEGRIP® II Plugs - S-250 w/ GK-43 Black Gasket
Manufactured from premium deep-drawing quality steel, VISEGRIP® & VISEGRIP® II plugs are noted for perfect balance, uniform dimensions, and high-quality finish. They are designed with a rounded bottom for easier thread starting and hexagonal shoulder for ease of opening when conventional wrenches are not available. The plugs' wide shoulders and concentric sealing beads lock gaskets securely into position.

Part# 26WVG2 - Visegrip® 2" Drum Plug (For use in Rieke® Visegrip® Flanges)
Part# 26WVG4 - Visegrip® II 2" Drum Plug (For use in Rieke® Visegrip® II Flanges)
- GK-43 & GV-43 Black VISECAR® Buna Gasket
- Features a center cross bar.
- Standard electro zinc plated; also available in unplated steel or lined with commercial coatings.
- Features straight rolled threads.
- Utilizes standard insertion tools, wrenches and seals.

Usage Note: Accurate sealing at 30 foot-pounds torque is best accomplished using our W-168PT or W-168SPT 30/15 preset torque wrench (Part# 26WWPT or 26WSPW-Sparkless)

Part# 26W3VG - Visegrip® 3/4" Drum Plug w/ GK-41 Gasket (For use in Rieke® Visegrip® Flanges)
Part# 26WVG5 - Visegrip® II 3/4" Drum Plug w/ GV-41 Gasket (For use in Rieke® Visegrip® II Flanges)
- GK-41 & GV-41 Black VISECAR® Buna Gasket
- Standard electro zinc plated; also available in unplated steel or lined with commercial coatings.
- Features straight rolled threads.
- Utilizes standard insertion tools, wrenches and seals.

Usage Note: Accurate sealing at 15 foot-pounds torque is best accomplished using our W-168PT or W-168SPT 30/15 preset torque wrench (Part# 26WWPT or 26WSPW-Sparkless)

Part# 26WSPE
- 2" (NPS) HIGH-DENSITY POLYETHYLENE (HDPE)
- GK-93W White EPDM Gasket
- National Pipe Threads (NPS)

Combination plug with removable diaphragm and 3/4" faucet carrier for FLO-RITE faucets (Part# 57WFLO).

RIEKE® SAFESEAL combination plastic/metal capseals provide positive tamper evident protection, and are available in 3/4" PX-1 (Part#26WSS1) and 2" PX-3 (Part#26WSS2) sizes.

Part# 26WSS2 - 2" White Plastic/Metal Capseal (PX-3)
Part# 26WSS1 - 3/4" White Plastic/Metal Capseal (PX-1)

The SAFESEAL plastic capseal may be affixed using standard VISEGRIP® sealing tools. The G-10 (Part# 26WRIF) can be used for closing 2" Hex-Head VISEGRIP® Caps Seals and the G-30 (Part# 26WRIG) can be used for closing 3/4" Hex-Head VISEGRIP® Cap Seals.

RIEKE® VISEGRIP® metal cap seals provide positive tamper evident protection, and are available in 3/4" X-1 (Part# 26WTE1) and 2" X-3 (Part# 26WTE2) sizes.

Part# 26WTE2 - 2" White Metal Capseal (X-3)
Part# 26WTE1 - 3/4" White Metal Capseal (X-1)

The VISEGRIP metal cap seals may be affixed using standard VISEGRIP sealing tools. The G-10 (Part# 26WRIF) can be used for closing 2" Hex-Head VISEGRIP® Caps Seals and the G-30 (Part# 26WRIG) can be used for closing 3/4" Hex-Head VISEGRIP® Cap Seals.

Rieke® All-Plastic Cap Seal for Hex-Head Plugs

The RIEKE® All-Plastic Cap Seal provides positive tamper evident protection, and is available in 3/4" (Part#26WAP1) and 2" (Part# 26WAP2) sizes. These are for use on Rieke Metal Hex Head Plugs only.

Part# 26WAP2 - 2" White All-Plastic Capseal
Part# 26WAP1 - 3/4" White All-Plastic Capseal

The All-Plastic Cap Seal requires no tools for application!

Part# 57WFLK

Part# 56W53E
- 2" (NPS) HIGH-DENSITY POLYETHYLENE (HDPE)
- Satisfies 178.605 PKG group hydrostatic testing requirements
- Incorporates standard 2" straight National Pipe Threads (NPS) with additional "easy start" threads
- Promotes reconditioning and reuse of container
- GK-97 Black EPDM Gasket
- Color: Natural

Usage Note: Accurate sealing at 20 foot-pounds torque is best accomplished using our W-168PT or W-168SPT 20/9 preset torque wrench (Part# 26WWPP or #26WSPP-Sparkless)

Part# 56W57E
- 2" (Buttress Threads) HIGH-DENSITY POLYETHYLENE (HDPE)
- Color: Natural
- Incorporates a 3/4" threaded opening with a knock-out diaphragm
- A snap-fit faucet carrier for the FLO-RITE faucet (#57WFLO) is available upon request.
- GK-96W White EPDM Gasket

Rieke® PPA-56 (2") POLY-VISEGRIP® Plugs For Poly Drums
RIEKE® POLY-VISEGRIP® plugs are made of natural high-density polyethylene (HDPE) with a UV inhibitor. All satisfy the requirements of the FDA and UN Packaging Standards. They can be cap sealed with either our plastic SAFESEAL® or metal VISEGRIP® cap seal using standard equipment.

Usage Note: Accurate sealing at 20 foot-pounds torque is best accomplished using our W-168PT or W-168SPT 20/9 preset torque wrench (Part# 26WWPP or #26WSPP-Sparkless)

RIEKE® SAFESEAL combination plastic/metal capseals provide positive tamper evident protection, and are available in 3/4" PX-1 (Part# 26WSS1) and 2" PX-3 (Part# 26WSS2) sizes.

Part# 26WSS2 - 2" White Plastic/Metal Capseal (PX-3)
Part# 26WSS1 - 3/4" White Plastic/Metal Capseal (PX-1)

The SAFESEAL plastic capseal may be affixed using standard VISEGRIP® sealing tools. The G-10 (Part# 26WRIF) can be used for closing 2" Hex-Head VISEGRIP® Caps Seals and the G-30 (Part# 26WRIG) can be used for closing 3/4" Hex-Head VISEGRIP® Cap Seals.

RIEKE® VISEGRIP® metal cap seals provide positive tamper evident protection, and are available in 3/4" X-1 (Part# 26WTE1) and 2" X-3 (Part# 26WTE2) sizes.

Part# 26WTE2 - 2" White Metal Capseal (X-3)
Part# 26WTE1 - 3/4" White Metal Capseal (X-1)

The VISEGRIP metal cap seals may be affixed using standard VISEGRIP sealing tools. The G-10 (Part# 26WRIF) can be used for closing 2" Hex-Head VISEGRIP® Caps Seals and the G-30 (Part# 26WRIG) can be used for closing 3/4" Hex-Head VISEGRIP® Cap Seals.

Part# 57WFLK

Rieke® 2" VISEGRIP® & VISEGRIP® II Plugs - S-250 w/ GK-43 Black Gasket
Manufactured from premium deep-drawing quality steel, VISEGRIP® & VISEGRIP® II plugs are noted for perfect balance, uniform dimensions, and high-quality finish. They are designed with a rounded bottom for easier thread starting and hexagonal shoulder for ease of opening when conventional wrenches are not available. The plugs' wide shoulders and concentric sealing beads lock gaskets securely into position.

Part# 26WVG2 - Visegrip® 2" Drum Plug (For use in Rieke® Visegrip® Flanges)
Part# 26WVG4 - Visegrip® II 2" Drum Plug (For use in Rieke® Visegrip® II Flanges)
- GK-43 & GV-43 Black VISECAR® Buna Gasket
- Features a center cross bar.
- Standard electro zinc plated; also available in unplated steel or lined with commercial coatings.
- Features straight rolled threads.
- Utilizes standard insertion tools, wrenches and seals.

Usage Note: Accurate sealing at 30 foot-pounds torque is best accomplished using our W-168PT or W-168SPT 30/15 preset torque wrench (Part# 26WWPT or 26WSPW-Sparkless)

Part# 26W3VG - Visegrip® 3/4" Drum Plug w/ GK-41 Gasket (For use in Rieke® Visegrip® Flanges)
Part# 26WVG5 - Visegrip® II 3/4" Drum Plug w/ GV-41 Gasket (For use in Rieke® Visegrip® II Flanges)
- GK-41 & GV-41 Black VISECAR® Buna Gasket
- Standard electro zinc plated; also available in unplated steel or lined with commercial coatings.
- Features straight rolled threads.
- Utilizes standard insertion tools, wrenches and seals.

Usage Note: Accurate sealing at 15 foot-pounds torque is best accomplished using our W-168PT or W-168SPT 30/15 preset torque wrench (Part# 26WWPT or 26WSPW-Sparkless)

The RIEKE® FLEXSPOUT® closure is the original tamper-evident plastic directional pour spout. It is the standard for both metal and plastic containers. To allow for fast and efficient filling, the closure is designed to be affixed to a large 2-3/8" (63mm) opening without registry. The low profile of the closure provides ease of stacking. Use the (Part# 26WRIC) FS-600 Manual Crimping tool to seal.

FLEXSPOUT closures are equipped with a tamper-evident cap and a double-bailed 38mm screw cap. The screw cap has an extra ridge to assure a tight seal when recapped. The FLEXSPOUT closure meets the requirements of DOT and the FDA, as well as the suggested specifications of the EPA and National Agricultural Chemical Association for five-gallon pails.

Part# 26WAMT - 439334900 Tri-Sure® Uni-Grip® Spouts *500/case

Part# 26WAMV - 439684900 Tri-Sure® Uni-Grip® Spouts w/ Vent *450/case

The UNI-GRIP® 60C Closure can be applied to metal and plastic containers and is ideally suited for containers ranging in volume from 5 to 16 gallons. Use the (Part#26WAMC) Uni-Grip Manual Crimping tool to seal.
Dimensions:
Spout Pour Opening: 33mm (1-5/16"), Spout Length: 43mm (1-11/16")
Materials:
Cap: HDPE, Spout: LDPE, Crimping Ring: Yellow Passivated

The RIEKE® FLEXSPOUT® closure is the original tamper-evident plastic directional pour spout. It is the standard for both metal and plastic containers. To allow for fast and efficient filling, the closure is designed to be affixed to a large 2-3/8" (63mm) opening without registry. The low profile of the closure provides ease of stacking. Use the (Part# 26WRIC) FS-600 Manual Crimping tool to seal.

FLEXSPOUT closures are equipped with a tamper-evident cap and a double-bailed 38mm screw cap. The screw cap has an extra ridge to assure a tight seal when recapped. The FLEXSPOUT closure meets the requirements of DOT and the FDA, as well as the suggested specifications of the EPA and National Agricultural Chemical Association for five-gallon pails.

Part# 26WAMT - 439334900 Tri-Sure® Uni-Grip® Spouts *500/case

Part# 26WAMV - 439684900 Tri-Sure® Uni-Grip® Spouts w/ Vent *450/case

The UNI-GRIP® 60C Closure can be applied to metal and plastic containers and is ideally suited for containers ranging in volume from 5 to 16 gallons. Use the (Part#26WAMC) Uni-Grip Manual Crimping tool to seal.
Dimensions:
Spout Pour Opening: 33mm (1-5/16"), Spout Length: 43mm (1-11/16")
Materials:
Cap: HDPE, Spout: LDPE, Crimping Ring: Yellow Passivated