Polypropylene Drum Pump

Part# 26WPXP - Polypropylene Drum Pump

Designed to fit 2" NPS bung openings. The spout can be rotated to prevent dripping. 16 oz. per stroke with adjustable stroke tubes. Fits 15, 30, and 55 gallon drums. Weight 1 lb.

Stainless Steel Drum & Pail Pump

Part# 26WSST - 316 Stainless Steel Drum Pump w/ PTFE Piston

Stainless Steel Drum Pump dispenses 8 ounces per stroke and is designed for 5 gallon pails or 15, 30, and 55 gallon Drums. 2” bung adaptor included. 

Ideal for transferring a variety of liquids including solvents, most acids, and other corrosive chemicals that are compatible with stainless steel and PTFE.  Even viscous liquids can be transferred efficiently because of the simple and rugged design.

Stainless Steel T-Handle Drum Pump

Part# 26WSTP - Stainless Steel Drum Pump w/ PTFE Piston

Ideal for transferring a variety of liquids including detergents, acids, corrosives, and many other chemicals compatible with stainless steel and PTFE.  Delivers up to 22 ounces per stroke.  1-1/2” outer body diameter by 41” long.  2” bung adapter included.  Weight 5 lbs.

Stainless Steel Pail Safety Pump

Part# 26WSSG - 316 Stainless Steel Pail Pump w/ PTFE Piston
Part# 26BSSH - 316 Stainless Steel Pail Pump w/ Spout Adapter

This pail pump is great for dispensing small amounts of liquid.  Delivers 4 ounces per stroke.  Bonding and grounding wires have heavy-duty alligator clips.  Supplied with four screw cap adapters (1-3/4", 2-1/8", 2-7/8", and 2-1/4").  Pump is made with 316 stainless steel metal parts, PTFE piston, packing, and gasket.

Please Note: If you are putting this on a Rieke Flexspout II you will also need Part#30WFSA - FS-4038 Pump Adapter

Stainless Steel Drum Safety Pump

Part# 26WSSI - 316 Stainless Steel Drum Safety Pump w/ PTFE Piston
Part# 26BSCI - Chrome Steel Drum Safety Pump w/ PE Piston

This FM approved safety pump is loaded with features!  Each pump comes with a 2" NPS bung adapter and fits 15-55 gallon drums.  Built-in bonding and grounding wires equipped with heavy duty alligator clips are included with each unit.  Delivers 8oz per stroke.  Pump is composed of 316 stainless for all metal parts, with a PTFE piston, packing, and gasket.

Steel Pail Pump

Part# 26WSHP - Steel Pail Pump

5 gallon Steel Pail Pump fits flexspout openings. Designed for use on standard 5 gallon pails containing a Rieke Flexspout.

Goat Throat Pump

Part# 26BGNP - Goat Throat Drum Pump w/ Nitrile Seal
Part# 26BGNR - Goat Throat Remote Discharge w/ Nitrile Seals
Part# 26BGEP - Goat Throat Drum Pump w/ EPDM Seal
Part# 26BGER - Goat Throat Remote Discharge w/ EPDM Seals
Part# 26BGSP - Goat Throat Drum Pump w/ Santoprene Seal
Part# 26BGVP - Goat Throat Drum Pump w/ Viton Seals
Part# 26BGVR - Goat Throat Remote Discharge w/ Viton Seals
Part# 26BGTA - Goat Throat Air Adapter

Goat Throat pumps dispense at a rate of up to 4 gallons per minute depending on the viscosity of the product it is being dispensed.  Just a few strokes of the upper handle to pressurize the container, or you can use the optional air adapter.  The pump is 100% polypropylene and works with over 700 chemicals, with different seal types being available for compatibility purposes.  The pump fits a 2” NPT bung opening.  All units come with a 4” standoff to add extra clearance for filling.

Rieke® MR60 Lever Action Polypropylene Pump

Part# 30WLAP - Lever Action Polypropylene Drum Pump

Designed to fit 2" NPS bung openings. The Lever Action Pump is designed to handle viscous liquids. Pumps 10 ounces per stroke and up to 6 gallons per minute. Contains a self-venting spout that rotates for ease in dispensing. Telescoping suction tube easily goes from 15-55 gallon drums.

Lever Action Polypropylene Piston Pump

Part# 30BLAQ - Lever Action PP Piston Drum Pump

Designed to fit 2" NPS & 2" Buttress bung openings on 15, 30 and 55 gallon Drums. The Piston Lever Action Pump is designed to handle viscous liquids. Pumps 16 ounces per stroke. 36" long telescoping suction tube easily goes from 15-55 gallon drums. Maximum temperature is 130° F. Materials in contact with solution are viton, polypropylene, and stainless steel. Ideal for oils, detergents, and other compatible industrial fluids.

Lever Action Polypropylene Drum Pump w/ Steel Rod

Part# 30BLAU - Lever Action PP Pump w/ Steel Rod

Designed to fit 2" NPS on 15, 30 and 55 gallon Drums. Pumps 9 gallons per minute.

Lever Action Polypropylene Drum Pump w/ Stainless Steel Rod (316SS)

Part# 30BLAR - Lever Action PP Pump w/ 316 Stainless Steel Rod

Designed to fit 2" NPS on 15, 30 and 55 gallon Drums. Designed for water, alcohol, gasoline, diesel, kerosene, lubricant, water-based chemicals, acid and alkali solutions. Pumps 9 gallons per minute.

Lever Action Steel Drum Pump

Part# 30BLAS - Lever Action Steel Drum Pump

Designed to fit 2" NPS bung openings on 15, 30 and 55 gallon Drums.

- Steel piston for durability
- Neoprene seals resist wear and abrasive fluids
- Zinc-plated pump and spout retards rust and corrosion
- Dispenses kerosene, antifreeze, light-weight oils (up to 50 wt. viscosity motor oils), non-water based and non-corrosive detergents, waxes or disinfectants
- Not for use with acetone, benzene, carbon tetrachloride, caustic soda, cresol acid, ethyl, hydrochloric, methyl ethyl, nitric, phenol, and sulfuric acids and thinners

Lever Action PTFE and Stainless Steel Drum Pump

Part# 30BLAT - PTFE & Stainless Steel Lever Action Drum Pump

Designed to fit 2" NPS on 15, 30 and 55 gallon Drums. Pumps 9 gallons per minute.

Lever Action Ryton Drum Pump w/ Stainless Steel Rod & PTFE Piston

Part# 30BLAX -Ryton, Stainless Steel & PTFE Lever Action Drum Pump

Designed to fit 2" NPS on 15, 30 and 55 gallon Drums. 100 Strokes/10 gallons per minute.

High Viscosity Lever Action Drum Pump

Part# 30WLAV -High Viscosity Pump

Hi Flow Aluminum Rotary Pump

Part# 26W114 - Hi Flow Aluminum Rotary Drum Pump

High volume aluminum rotary pump can empty a 55 gallon drum in less than two minutes. Easy turn crank steel intake tubes fits 15, 30, and 55 gallon drums. Designed for transferring fuel oil, kerosene, diesel fuel, anti-freeze, and other non-corrosive liquids compatible with pump materials of construction.

Heavy Duty Cast Iron Rotary Pump

Part# 26B113 - Heavy Duty Cast Iron Rotary Drum Pump

Part# 26B11H - 5' PVC Hose & Clamp Kit for Rotary Pump

Heavy duty 10 gpm cast iron pump fits 15, 30 and 55 gallon drums. Includes 2" drum bung adapter. Can be used with oils, antifreeze, transmission fluid, etc. Not for use with water!

304 Stainless Steel Rotary Pump

Part# 26W119 - 304 Stainless Rotary Drum Pump w/ PTFE Rotor

This pump is made out of 304 Stainless Steel with a PTFE rotor, and is designed to fit 15, 30 and 55 gallon drums. The Stainless Rotary Pump dispenses 10 gallons per minute. Includes 2" drum bung adapter. Used with many applications including alcohols, kerosene, and some solvents, along with a wide variety of mild applications.

Sparkless Bronze Rotary Pump

Part# 26B110 - Non-Sparking Bronze Rotary Pump

This self-priming, non-sparking rotary pump is made out of a rugged bronze construction, with 47" 3 piece plated suction tube. It has durable phenolic veins. This particular sparkless rotary drum pump is designed for medium viscosity petroleum-based products.

Ryton Rotary Pump

Part# 26B118 - Ryton Rotary Drum Pump

Part# 26B11H - 5' PVC Hose & Clamp Kit for Rotary Pump

Ryton rotary pump fits 15, 30 and 55 gallon drums.

Polypropylene Rotary Pump

Part# 26B117 - Polypropylene Rotary Drum Pump

Part# 26B11H - 5' PVC Hose & Clamp Kit for Rotary Pump

Polypropylene pump is good for waxes, detergents and water-soluble chemicals, and delivers 8gpm. The PP Rotary Pump fits 15-30- and 55 gallon drums with a 2" opening.

Piston Pumps

The self priming piston pumps on the forward and backward stroke (double action) to yield a gallon in fewer than 5 cycles.  Use these pumps with compatible temperatures up to 80 degrees Fahrenheit and a maximum viscosity of 2000 SSU (30W motor oil).

Part# 26BMP1 - Polyester piston pump & PVC Hose
Part# 26BMP2 - Polyester piston pump & EPDM Hose
Part# 26BMP3 - Polyester piston pump & CL Polyethylene Hose
Part# 26BMP4 - Ryton piston pump & CL Polyethylene Hose
Part# 26BMP5 - Ryton piston pump & EPDM Hose

Siphon Drum Pump

Part# 26WPSP - Light Duty Siphon Drum Pump

Designed for quick and easy emptying of 15, 30, and 55 gallon drums. Can be used for water-based fluids, mild corrosives, detergents, waxes, soaps, anti-freeze, etc. Comes standard with a 2" NPS bung adapter. Pumps 5 GPM. Weight 1 lb.

Rieke® MR50-5 Pail Pump

Part# 26WRPP - Rieke® MR50-5 Pail Pump

• MR50-5 comes with a special adapter for use with 5-gallon pail equipped with a Rieke® FLEXSPOUT® and fits 3/4" and 2" standard threaded drum openings.
• The MR50-5 pump dispenses eight ounces and can be adjusted to dispense 2, 4, or 6 ounces with special restrictor clips enclosed with each pump.

Pump Instructions

Please Note: If you are putting this on a Rieke Flexspout II you will also need Part#30WFSA - FS-4038 Pump Adapter

Easy Action Pail and Drum Pumps
Part# 30WEZD / 30WADP - 55 Gallon Drum Pump (30WEZD) & Adapters (30WADP)
Part#30WEZA - 15 & 30 Gallon Drum Pump w/ 2" NPS & 2" Buttress adapters
Part# 30WEZP - 5 Gallon Pail Pump w/ 70mm & FLEXSPOUT® adapters

• Approx. 400mls (15oz) delivery per stroke
• Anti-pumping/child safety device
• Outlet spout swivels to prevent drips
• 2 Year Warranty
• FDA compliant material
• Not for use with flammables or solvents.

Stainless Steel Electric Drum Pump

Part# 26BSSE - Stainless Steel Electric Drum Pump
(1/2 HP Motor, 10,000 RPM, 110 Volt, 6ft Electric Cord)

Part# 26BSSV - Stainless Steel Electric High Viscosity Drum Pump
(1/3 HP Motor, 3,450 RPM, 110 Volt, 8ft Electric Cord w/ On/Off Switch)

Self Priming Heavy duty electric pump. Both pumps are made of rugged 316 stainless steel and PTFE internal parts can handle a variety of tough liquids. 26BSSV is Ideal for use on high viscosity liquids.

Electric Drum Pump

Part# 30BDTP - Polypropylene Electric Drum Pump
(Transfer Pump, Flow 17.0 GPM, Power Rating 1/2 HP, Maximum Head 20.7 Feet, Pump Body Material Polypropylene, Discharge Tubing Material PVC, Internal Parts Material Carpenter 20, Speed 10,000 RPM, Length 48 Inches, Height 8 Inches, Width 6 Inches, Electric Motor, For 15, 30 and 55 Gallons Drums.)

Part# 30BDTE - 110V Electric CPCV Drum Pump
(Ideal for use with Sodium Hypochlorite, Potassium Hydroxide, Sodium Bromide and other common water treatment chemicals. Pump rate of 35 GPM 39” Intake Tube )

Sotera® Pump 'N' Go Pumps

This electric pump is especially suited to pull from the top of a drum or the bottom of a caged IBC. Included, but not shown, is a 3’ EPDM intake hose, 12’ EPDM discharge hose, and all connection fittings. The Pump'N'Go pumps also come with a stainless steel stand.

Part# 26WPGD - Sotera® 12V Pump N Go Drum Kit (No Meter)

Part# 26WPGA - Sotera® 115AC Pump N Go Drum Kit (No Meter)

Sotera® Chemtraveller Pumps

This electric pump is portable and comes with a tubular frame complete with top and bottom adapter kits. Included, but not shown, is a 9’ EPDM intake hose, 12’ EPDM outlet hose, meter, shut off ball valve with non-drip nozzle and all connection fittings. They are 12V DC and are perfect for collecting bio diesel, moving between agricultural equipment, or any other mobile application you may have.

Part# 26WPGC - Sotera® 12V Chemtraveller Kit

Rieke® R-30 38mm Dispensing Pump
Part# 30WR30 - 11-1/4" Dip Tube, 30ml Dose - For use with 1 gallon Round Jugs.
Part# 30WR33 - 11-1/4" Dip Tube, 20ml Dose - For use with 1 gallon Round Jugs.
Part# 30WR31 - 11-1/4" Dip Tube, 15ml Dose - For use with 1 gallon Round Jugs.
Part# 30WR32 - 9-3/8" Dip Tube, 15ml Dose - For use with 1/2 gallon Round Jugs.
Part# 30WR34 - 10-1/2" Dip Tube, 15ml Dose - For use with 1 gallon Square Jugs.

• Designed for use on 1/2 gallon & 1 gallon Jugs w/ a 38mm opening
• Innovative lower umbrella valve that allows dispensing of viscous products while inhibiting drainback.
• Large diameter suction tube.
• Durable polypropylene construction.
• Materials meet F.D.A. requirements.
• 30ml/1 ounce dose is standard.
• Very smooth plunger action.

Also Available in 5ml, 10ml and 25ml Doses!

Rieke® RS-30 38mm 1oz Dispensing Pump
Part# 30W3RS - 1 oz, White Lock Down Pump, 30ml Dose - For use with 1 gallon bottles.

• Fits a broad range of bottle capacities
• Shippable-high level of thread engagement in the lock-down position (1.5 full turns) for safe and secure distribution
• Unique modular design enables it to handle a huge variety of products
• Can handle free-flowing liquids, such as water to products with extremely high viscosities (60,000cps) with small particulates
• Designed to provide a robust finish, offering excellent durability and stability
• 30ml/1 ounce dose is standard.
• Dispenses at a variety of angles, including near vertical

Rieke® RS-5 28/410 Dispensing Pump
Part# 30WRS5 - Rieke® White Smooth Sided RS-5 Pump, 5ml Dose, 28-410 neck, 500/case

• Shippable in locked-down position
• Dispenses a wide range of liquids and viscous products - shampoos, soaps, lotions & gels
• Superior design for long-life
• Dispenses alcohol based products
• No metal contact dispensing
• No water ingress - the pump is 100% shower proof
• Low profile when locked-down
• Low effort to operate