Polypropylene Drum Pump

Part# 26WPXP - Polypropylene Drum Pump

Designed to fit 2" NPS bung openings. The spout can be rotated to prevent dripping. 16 oz. per stroke with adjustable stroke tubes. Fits 15, 30, and 55 gallon drums. Weight 1 lb.

Stainless Steel Drum & Pail Pump

Part# 26BSSP - 316 Stainless Steel Drum Pump w/ Teflon Piston

Stainless Steel Drum Pump dispenses 8 ounces per stroke and is designed for 5 gallon pails or 15, 30, and 55 gallon Drums. 2” bung adaptor included. 

Ideal for transferring a variety of liquids including solvents, acids, and other corrosive chemicals that are compatible with stainless steel and Teflon.  Even viscous liquids can be transferred efficiently because of the simple and rugged design.

Stainless Steel T-Handle Drum Pump

Part# 26BSTP - Stainless Steel Drum Pump w/ Teflon Piston

Ideal for transferring a variety of liquids including detergents, acids, corrosives, and many other chemicals compatible with stainless steel and Teflon.  Delivers up to 22 ounces per stroke.  1-1/2” outer body diameter by 41” long.  2” bung adapter included.  Weight 5 lbs.

Stainless Steel Pail Safety Pump

Part# 26BSSG - 316 Stainless Steel Pail Pump w/ Teflon Piston
Part# 26BSSH - 316 Stainless Steel Pail Pump w/ Spout Adapter

This pail pump is great for dispensing small amounts of liquid.  Delivers 4 ounces per stroke.  Bonding and grounding wires have heavy-duty alligator clips.  Supplied with four screw cap adapters (1-3/4", 2-1/8", 2-7/8", and 2-1/4").  Pump is made with 316 stainless steel metal parts, teflon piston, packing, and gasket.

Steel Pail Pump

Part# 26WSHP - Steel Pail Pump

5 gallon Steel Pail Pump fits flexspout openings. Designed for use on standard 5 gallon pails containing a Rieke Flexspout.

Rieke® MR50-5 Pail Pump

Part# 26WRPP - Rieke® MR50-5 Pail Pump

• MR50-5 comes with a special adapter for use with 5-gallon pail equipped with a Rieke® FLEXSPOUT® and fits 3/4" and 2" standard threaded drum openings.
• The MR50-5 pump dispenses eight ounces and can be adjusted to dispense 2, 4, or 6 ounces with special restrictor clips enclosed with each pump.

Pump Instructions

Please Note: If you are putting this on a Rieke Flexspout II you will also need Part#30WFSA - FS-4038 Pump Adapter

Easy Action Pail and Drum Pumps
Part# 30WEZD - 55 Gallon Drum Pump w/ 2" NPS & 2" Buttress adapters
Part#30WEZA - 15 & 30 Gallon Drum Pump w/ 2" NPS & 2" Buttress adapters
Part# 30WEZP - 5 Gallon Pail Pump w/ 70mm & FLEXSPOUT® adapters

• Approx. 400mls (15oz) delivery per stroke
• Anti-pumping/child safety device
• Outlet spout swivels to prevent drips
• Drum Attachment fittings available
• 2 Year Warranty
• FDA compliant material
• Not for use with flammables or solvents.

Goat Throat Pump

Part# 26BGNP - Goat Throat Drum Pump w/ Nitrile Seal
Part# 26BGNR - Goat Throat Remote Discharge w/ Nitrile Seals
Part# 26BGEP - Goat Throat Drum Pump w/ EPDM Seal
Part# 26BGER - Goat Throat Remote Discharge w/ EPDM Seals
Part# 26BGSP - Goat Throat Drum Pump w/ Santoprene Seal
Part# 26BGVP - Goat Throat Drum Pump w/ Viton Seals
Part# 26BGVR - Goat Throat Remote Discharge w/ Viton Seals
Part# 26BGTA - Goat Throat Air Adapter

Goat Throat pumps dispense at a rate of up to 4 gallons per minute depending on the viscosity of the product it is being dispensed.  Just a few strokes of the upper handle to pressurize the container, or you can use the optional air adapter.  The pump is 100% polypropylene and works with over 700 chemicals, with different seal types being available for compatibility purposes.  The pump fits a 2” NPT bung opening.  All units come with a 4” standoff to add extra clearance for filling.

Piston Pumps

The self priming piston pumps on the forward and backward stroke (double action) to yield a gallon in fewer than 5 cycles.  Use these pumps with compatible temperatures up to 80 degrees Fahrenheit and a maximum viscosity of 2000 SSU (30W motor oil).

Part# 26BMP1 - Polyester piston pump & PVC Hose
Part# 26BMP2 - Polyester piston pump & EPDM Hose
Part# 26BMP3 - Polyester piston pump & CL Polyethylene Hose
Part# 26BMP4 - Ryton piston pump & CL Polyethylene Hose
Part# 26BMP5 - Ryton piston pump & EPDM Hose

Rieke® R-30 38mm Dispensing Pump
Part# 30WR30 - 11-1/4" Dip Tube, 30ml Dose - For use with 1 gallon Round Jugs.
Part# 30WR33 - 11-1/4" Dip Tube, 20ml Dose - For use with 1 gallon Round Jugs.
Part# 30WR31 - 11-1/4" Dip Tube, 15ml Dose - For use with 1 gallon Round Jugs.
Part# 30WR32 - 9-3/8" Dip Tube, 15ml Dose - For use with 1/2 gallon Round Jugs.
Part# 30WR34 - 10-1/2" Dip Tube, 15ml Dose - For use with 1 gallon Square Jugs.

• Designed for use on 1/2 gallon & 1 gallon Jugs w/ a 38mm opening
• Innovative lower umbrella valve that allows dispensing of viscous products while inhibiting drainback.
• Large diameter suction tube.
• Durable polypropylene construction.
• Materials meet F.D.A. requirements.
• 30ml/1 ounce dose is standard.
• Very smooth plunger action.

Also Available in 5ml, 10ml and 25ml Doses!

Rieke® RS-30 38mm 1oz Dispensing Pump
Part# 30W3RS - 1 oz, White Lock Down Pump, 30ml Dose - For use with 1 gallon bottles.

• Fits a broad range of bottle capacities
• Shippable-high level of thread engagement in the lock-down position (1.5 full turns) for safe and secure distribution
• Unique modular design enables it to handle a huge variety of products
• Can handle free-flowing liquids, such as water to products with extremely high viscosities (60,000cps) with small particulates
• Designed to provide a robust finish, offering excellent durability and stability
• 30ml/1 ounce dose is standard.
• Dispenses at a variety of angles, including near vertical

Rieke® RS-5 28/410 Dispensing Pump
Part# 30WRS5 - Rieke® White Smooth Sided RS-5 Pump, 5ml Dose, 28-410 neck, 500/case

• Shippable in locked-down position
• Dispenses a wide range of liquids and viscous products - shampoos, soaps, lotions & gels
• Superior design for long-life
• Dispenses alcohol based products
• No metal contact dispensing
• No water ingress - the pump is 100% shower proof
• Low profile when locked-down
• Low effort to operate