Part# 30WLAP
 |
Rieke® MR60 Lever Action Polypropylene Pump
Part# 30WLAP - Lever Action Polypropylene Drum Pump
Designed to fit 2" NPS bung openings. The Lever Action Pump is designed to handle viscous liquids. Pumps 10 ounces per stroke and up to 6 gallons per minute. Contains a self-venting spout that rotates for ease in dispensing. Telescoping suction tube easily goes from 15-55 gallon drums. |
Part# 30BLAQ
 |
Lever Action Polypropylene Piston Pump
Part# 30BLAQ - Lever Action PP Piston Drum Pump
Designed to fit 2" NPS & 2" Buttress bung openings on 15, 30 and 55 gallon Drums. The Piston Lever Action Pump is designed to handle viscous liquids. Pumps 16 ounces per stroke. 36" long telescoping suction tube easily goes from 15-55 gallon drums. Maximum temperature is 130° F. Materials in contact with solution are viton, polypropylene, and stainless steel. Ideal for oils, detergents, and other compatible industrial fluids. |
Part# 30BLAU
|
Lever Action Polypropylene Drum Pump w/ Steel Rod
Part# 30BLAU - Lever Action PP Pump w/ Steel Rod
Designed to fit 2" NPS on 15, 30 and 55 gallon Drums. Pumps 9 gallons per minute. |
Part# 30BLAR
|
Lever Action Polypropylene Drum Pump w/ Stainless Steel Rod (316SS)
Part# 30BLAR - Lever Action PP Pump w/ 316 Stainless Steel Rod
Designed to fit 2" NPS on 15, 30 and 55 gallon Drums. Designed for water, alcohol, gasoline, diesel, kerosene, lubricant, water-based chemicals, acid and alkali solutions. Pumps 9 gallons per minute. |
Part# 30BLAS
 |
Lever Action Steel Drum Pump
Part# 30BLAS - Lever Action Steel Drum Pump
Designed to fit 2" NPS bung openings on 15, 30 and 55 gallon Drums.
- Steel piston for durability
- Neoprene seals resist wear and abrasive fluids
- Zinc-plated pump and spout retards rust and corrosion
- Dispenses kerosene, antifreeze, light-weight oils (up to 50 wt. viscosity motor oils), non-water based and non-corrosive detergents, waxes or disinfectants
- Not for use with acetone, benzene, carbon tetrachloride, caustic soda, cresol acid, ethyl, hydrochloric, methyl ethyl, nitric, phenol, and sulfuric acids and thinners |
Part# 30BLAT
|
Lever Action PTFE and Stainless Steel Drum Pump
Part# 30BLAT -PTFE & Stainless Steel Lever Action Drum Pump
Designed to fit 2" NPS on 15, 30 and 55 gallon Drums. Pumps 9 gallons per minute. |
Part# 30BLAX
|
Lever Action Ryton Drum Pump w/ Stainless Steel Rod & PTFE Piston
Part# 30BLAX -Ryton, Stainless Steel & PTFE Lever Action Drum Pump
Designed to fit 2" NPS on 15, 30 and 55 gallon Drums. 100 Strokes/10 gallons per minute. |
Part# 30WLAV
|
High Viscosity Lever Action Drum Pump
Part# 30WLAV -High Viscosity Pump
Ideal for use with high-viscosity liquids. Pumps 32 ounces per stroke and can be used with paraffin, motor oil, cutting oil and many viscous lubricants. Includes 2" bung adapter and telescoping tube for use on 15-30 and 55 gallon drums. Includes high angle discharge spout with screen and normal curved discharge spout. |
|
Absorbent Drum Pads
Pre-cut to fit a 55 gallon drum perfectly with allowance for fill and breather holes. Drum Top Covers available in White (Oil Only) and Gray (Universal)
Part# |
Product |
Color |
Type |
#/case |
37WDTW |
White Oil-Only Drum Top to Absorb Pump Drips on 55 gallon Drums |
White |
Oil-Only |
25 |
37WDTU |
Gray Universal Drum Top to Absorb Pump Drips on 55 gallon Drums |
Gray |
Universal |
25 |
|
