The Cary Company - Packaging & Equipment Division HOME PRODUCTS ORDER SAMPLES PRICING Contact Us

Inviroco
INVIROCO
Industrial Cleaners

Providing a full line of industrial cleaning products and parts washers.

 
Cutting & Grinding Fluids
Invircoclean
Industrial Cleaners

Industrial Cleaners & Degreasers
(Available in 5 gallon Pails, 55 gallon Drums, 275 gallon Totes)

Parts Washer Cleaners, Floor Scrubber Fluids, Mopping Cleaners, Machine Cleaners (Interior & Exterior), Solvents, Aqueous Degreasers, Truck Cleaners, Vehicle Cleaners, Brake Cleaners, Gear Cleaning and Agricultural Cleaners.


Industrial Cleaning Products Broken Down By Use:
Vehicle Cleaning
Machine Shops
Tank Cleaning
45 gal Portable
Buss lines
Warehouses
Stain Removal
3 gal Table Top
Truck Wash
Distribution Centers
Rust Preventative
 
Construction Equipment
     

Fleet Business - Cleaners & Degreasers
Industrial Cleaners for the cleaning of trucks, buss lines, construction equipment, and general vehicle cleaning.

Application
Product to Use
General Guidelines
Part #'s

INVIRO-CLEAN
Fleet & Equipment Wash
(Water Based Product)

Great product for removing dirt & soils.  Will not harm paint or finish of vehicles or equipment.  Can be sprayed on or brushed on.  May be mixed with tap water.  Do no allow product to dry on to the vehicle. 

Usage:  Dilute with water 30:1 to 100:1 depending on the soils.
#37WFE1 - 5 gal Pail
#37BFE2 - 55 gal Drum
#37BFE3 - 275 gal IBC

INVIRO-CLEAN
Aluma Bright
(Water Based Product)

This product is used to remove dirt and grime from Aluminum surfaces.  Does contain phosphorus and other additives to brighten the aluminum surfaces.  Great for big aluminum tankers or wheel cleaning.  Do not allow product to dry on to the surface.  Will not cause aluminum “blushing”.  Caution should be used during use.

Usage:  Dilute with water 50:1 to 100:1 depending on the soils.
#37WAB1 - 5 gal Pail
#37BAB2 - 55 gal Drum
#37BAB3 - 275 gal IBC

INVIRO-CLEAN
4000
(Water Based Product)

This aqueous cleaner is great for removing tough oils and greases from gears in a soaking style cleaning process.  Do NOT use on painted surfaces, will swirl and remove some paint finishes.  Is a great solvent replacement product for people looking to eliminate or reduce VOC emissions.

Usage:  Dilute with water 4:1 to 10:1 depending on the soils.
#37WIC1 - 5 gal Pail
#37BIC2 - 55 gal Drum
#37BIC3 - 275 gal IBC

INVIRO-CLEAN
 Brake Cleaner & Parts Cleaner
(Solvent Based Product)

This solvent based product is formulated to remove tenacious residues when cleaning brakes, wheel drums, and other parts with hard to remove soils.  With a flash point of 142F, it is a fairly safe to use product.  Also contains some grease cutting and water displacing additives for longer use.

Usages:  As is from the drum.
#37WCB1 - 5 gal Pail
#37BCB2 - 55 gal Drum
#37BCB3 - 275 gal IBC

INVIROCO
 BC Degreaser
(Solvent Based Product)

INVIROCO BC Degreaser, for cleaning breaks and drum cleaning, is a chemical formulation developed to remove tenacious grease and oil residues, including deposits left by oxidation like varnish. 

Usages:  As is from the drum.
#37WBC1 - 5 gal Pail
#37BBC2 - 55 gal Drum

INVIROCO
42WD
(Solvent RP/ Penetrating Oil)

This product is superior to WD 40 in many respects.  Unlike WD 40, our product does contain a rust preventative additive along with the penetrating qualities many mechanics are looking for.  Leaves a light oil film on the part when done.

Usage:  As is out of the drum or pail, may be applied with a brush or sprayed with an atomizer.
#37WWD1 - 5 gal Pail
#37BWD2 - 55 gal Drum
#37BWD3 - 275 gal IBC
For prices email tjtyrrell@thecarycompany.com or call ph#630-376-2400.

Industrial Business - Cleaners & Degreasers
Industrial Cleaners and Degreasers for machine shops and some warehouse / distribution centers.

Application
Product to Use
General Guidelines
Part #'s

INVIRO-CLEAN
Neutral Orange
(Water Based Product)

This product is great for use in general cleaning applications like mopping floors, floor scrubbers, etc.  Not recommended for vehicle and truck cleaning as it could swirl the paint.  Will not harm the seals in the floor scrubbers.

Usage:  Dilute with water 20 to 30:1 for mopping and 30 to 40:1 for floor scrubbers.
#37WIN1 - 5 gal Pail
#37BIN2 - 55 gal Drum
#37BIN3 - 275 gal IBC

INVIRO-CLEAN
1500 FS
(Water Based Product)

Great product for use in mopping applications and in floor scrubbers.  Will not harm seals in floor scrubbers.  FS 1500-W is an NSF approved product for areas around incidental food contact.

Usage:  Dilute with water 30:1 for mopping and 40:1 for floor scrubbers.  Product may always be used at richer concentrations for heavy soils and residues.
#37WIC4 - 5 gal Pail
#37BIC5 - 55 gal Drum
#37BIC6 - 275 gal IBC

INVIRO-CLEAN
1000
(Water Based Product)

Tremendous product for high temp (150-165F) parts cleaning.  We have had great luck with this product, cleaning smaller parts for the fastener and hydraulic industry and larger parts for Caterpillar/ John Deere.

Usage:  Dilute with water 20:1.  Product concentration may be read with a hand held refractometer.
#37WIC7 - 5 gal Pail
#37BIC8 - 55 gal Drum
#37BIC9 - 275 gal IBC

INVIRO-CLEAN
4000
(Water Based Product)

This aqueous cleaner is great for removing tough oils and greases from gears in a soaking style cleaning process.  Do NOT use on painted surfaces, will swirl and remove some paint finishes.  Is a great solvent replacement product for people looking to eliminate or reduce VOC emissions.

Usage:  Dilute with water 4:1 to 10:1 depending on the soils.
#37WIC1 - 5 gal Pail
#37BIC2 - 55 gal Drum
#37BIC3 - 275 gal IBC

INVIRO-CLEAN
K-30W
(Water Based Product)

This aqueous cleaner is formulated for the cleaning and brightening (polishing) of metal parts in a vibratory / de-burring application. 

Usage:  Dilute with water 10:1-20:1 depending on the soils and the desired amount of foam for the job.
#37WK01 - 5 gal Pail
#37BK02 - 55 gal Drum
#37BK03 - 275 gal IBC

INVIRO-CLEAN
HD DEGREASER

(Water Based Product)

This industrial degreaser aqueous cleaner is great for removing oil residues, especially in medium to hot parts washers.  The product is best used in low agitation systems, as high pressure will cause excessive foam.  Works great when doing non-ferrous metals.

Usage:  Dilute with water 4:1 to 10:1 depending on the soils.
#37WHD1 - 5 gal Pail
#37BHD2 - 55 gal Drum
#37BHD3 - 275 gal IBC

Rust Preventative
Dry Wax Film

INVIROCO
2304-RP
(Solvent RP)

Solvent cut-back RP for 1 year indoor protection.  Leaves a dry, waxy, thin film on the parts.

Usage:  Straight from the drum, spray, brush, or dip parts.
#37WRP1 - 5 gal Pail
#37BRP2 - 55 gal Drum
#37BRP3 - 275 gal IBC

Rust Preventative
Light Oil Film

INVIROCO
2504-RP
(Solvent RP)

Solvent cut-back RP for 1 year indoor protection.  Leaves an oily film on the parts.

Usage:  Straight from the drum, spray, brush, or dip parts.
#37WRP4 - 5 gal Pail
#37BRP5 - 55 gal Drum
#37BRP6 - 275 gal IBC

Rust Preventative
Light/ Dry Oil Film

INVIROCO
2464
(Solvent RP)

Solvent cut-back RP for 1 year + indoor protection.  Leaves an oily film on the parts.  Great salt spray protection also for overseas shipping. 
Usage:  Straight from the drum, spray, brush, or dip parts.  NOTE:  parts should be free of water or coolant before application of the RP.
#37WRP7 - 5 gal Pail
#37BRP8 - 55 gal Drum
#37BRP9 - 275 gal IBC

Rust Preventative
WD 40 Replacement

INVIROCO
42WD
(Solvent RP / Penetrating Oil)

This product is superior to WD 40 in many respects.  Unlike WD 40, our product does contain a rust preventative additive along with the penetrating qualities many mechanics are looking for.

Usage:  As is out of the drum or pail, may be applied with a brush or sprayed with an atomizer.
#37WWD1 - 5 gal Pail
#37BWD2 - 55 gal Drum
#37BWD3 - 275 gal IBC
For prices email sales@thecarycompany.com or call ph#630-376-2400.

Environmental / Tank Cleaning
These products could be used in the cleaning of tanks prior to inspection or decommissioning.  They may also have some use in cleaning stains on concrete (garages, etc.).  NOTE:  The application of TEAL-SORB prior to tank cleaning is perfect.  It removes several of the tenacious residues, and enables you to use far less soap and water when cleaning a tank.  This is a very important consideration as the cost of water based effluent for disposal can be rather pricey.

Application
Product to Use
General Guidelines
Part #'s

INVIRO-CLEAN
Neutral Orange
(Water Based Product)

This product is great for use in general cleaning applications like mopping floors, floor scrubbers, etc.  Not recommended for vehicle and truck cleaning as it could swirl the paint.  Will not harm the seals in the floor scrubbers.

Usage:  Dilute with water 20 to 30:1 for mopping and 30 to 40:1 for floor scrubbers.
#37WIN1 - 5 gal Pail
#37BIN2 - 55 gal Drum
#37BIN3 - 275 gal IBC

Stain Removal on Concrete

INVIRO-CLEAN
4000

(Water Based Product)

This aqueous cleaner is great for removing tough oils and greases from gears in a soaking style cleaning process.  Do NOT use on painted surfaces, will swirl and remove some paint finishes.  Is a great solvent replacement product for people looking to eliminate or reduce VOC emissions.
Usage:  Dilute with water 4:1 to 10:1 depending on the soils.

(Recommended to use TEAL-SORB to pick up as much oil as possible, then clean area with KW 4000).

#37WIC1 - 5 gal Pail
#37BIC2 - 55 gal Drum
#37BIC3 - 275 gal IBC
Interior Tank Rust Preventative

INVIROCO
5554-RP
(Oil Based RP)

After a tank has been cleaned, it may be sprayed with CG 4555 to protect it.  CG 4555 has excellent rust protection qualities in the presence of corrosive materials.

Usage:  Straight out of the drum.
#37WTR1 - 5 gal Pail
#37BTR2 - 55 gal Drum
#37BTR3 - 275 gal IBC
For prices email tjtyrrell@thecarycompany.com or call ph#630-376-2400.
Parts Washers
The Cary Company offers the New Generation of Aqueous Based Parts Washers designed for use with aqueous-based cleaning solutions.

Portable Water-Based Parts Washer

Part#: 37BPWG (Green), 37BPWU (Blue), 37BPWK (Black), 37BPWO (Orange)

Parts Washers
Features:
• Dual filtration system. Pre-filter and drain filter
• Corrosion resistant heavy – duty pump
• Heavy duty rolling cart
• GFCI for added shock resistant safety
• Spigot with fluid control valve
• Heater thermostatically controlled preset to 110 (F)
• Flow-thru brush with adjustable fluid control
• Thermo-well for protection of the thermostat capillary bulb
• Low level fluid sensor
• 10 gallon soaking capacity
• Quick sink removable for easy servicing
• Filter system prolongs fluid life
Reservoir Working Area:
Sink length 34”
Width 23”
Depth 9”
Overall Size:
Length 34”
Width 23”
Height 33”
Capacity 45 Gallons

Bench Top Water-Based Parts Washer

Part#: 37BPW3
Table Top Parts Washer

Features:
  • Corrosion resistant heavy-duty pump
  • Flo-thru brush
  • Operating fluid capacity 3 to 4 gallons
  • 115 volts .6 amps
  • On-off switch built into cord
  • Stainless steel lid and top
  • Spring loaded door closure
  • Heavy-duty, high density polyethylene tank

Dimensions:
Tank dimensions: 13-1⁄4”W x 19”L x 7”D
Overall dimensions: 15-1⁄2”W x 21-1⁄2”L x 10-1⁄2”H
Weight: 15 lbs.

Parts Washers Recommended for Use with INVIRO-CLEAN 4000 or INVIRO-CLEAN HD DEGREASER

Call or Email for Pricing
Ph#630-376-2400 or Email: sales@thecarycompany.com

Other styles & sizes of Parts Washers are available upon request


Home- Products - Order - Samples -Pricing - Contact Us - Chemical Division - Directions

©Copyright 2010 The Cary Company -All rights reserved. Send questions & comments regarding this site to the Webmaster.
The Cary Company 1195 W. Fullerton, Addison IL 60101