AQUEOUS HIGH PRESSURE / HIGH TEMPERATURE PARTS CLEANER

 INVIRO-CLEAN 1000 is an all-purpose heavy duty cleaner composed of highly active ingredients.  It is extremely efficient in cleaning all types of oil and grease residues and is safe to use on ferrous and non-ferrous metals. INVIRO-CLEAN 1000 is best used at temperatures at or above 140o F, especially in high pressure spray booths, or applications with high agitation.  (NOTE:  Below 1400 F INVIRO-CLEAN 1000 will create excessive foam).  INVIRO-CLEAN 1000 is also capable of performing very well at room temperatures where agitation is not part of the washing process (floor scrubbers, mopping,spray & wipe). 
INVIRO-CLEAN 1000 is also unique in that it has a very mild pH when diluted.  This further enhances the safety of the product.  INVIRO-CLEAN 1000 also contains a very good rust inhibitor, so short term protection is available and flash rust should not occur.
INVIRO-CLEAN 1000 is generally used by diluting in water at ratios of 10:1 to 20:1.  A 5 gallon pail of INVIRO-CLEAN 1000 will make 100 gallons of parts cleaner at 20:1.

TYPICAL PHYSICAL PROPERTIES

                Appearance                                                                          Clear Yellow Liquid
                Specific Gravity @ 25C                                                       1.0
                Refractive Index Concentrate                                             18.75
                pH @20:1 in Tap Water                                                      9.5-10.5
                Flash Point C.O.C.                                                                None
                Solubility 2% in Tap Water                                                Complete
                Foaming Tendencies above 50oC (120 F)                         Very Low
                Rinsibility                                                                              Good
                Weight per Gallon                                                                9.1  lbs.
                Rust Protection                                                                    Pass

APPLICATION DILUTION RATES

High Pressure Washers:                     10:1 to 30:1 Depending upon soils   
NOTE:  product concentration and dilution rates may be checked with a refractometer.

HEALTH AND SAFETY: INVIRO-CLEAN 1000 is free of Diethanolamines (DEA), Diethanolamides, and phenolic materials.  Refer to Material Safety Data Sheet for complete handling procedures.

Warranty: Because conditions of use are beyond our control no representation or warranty is made in connection with the use of this product. Technical information and recommendations are believed to be accurate but are not guaranteed

Industrial Business - Cleaners & Degreasers
Industrial Cleaners and Degreasers for machine shops and some warehouse / distribution centers.

INVIRO-CLEAN
1000
(Water Based Product)

Tremendous product for high temp (150-165F) parts cleaning.  We have had great luck with this product, cleaning smaller parts for the fastener and hydraulic industry and larger parts for Caterpillar/ John Deere.

INVIRO-CLEAN
Neutral Orange
(Water Based Product)

This product is great for use in general cleaning applications like mopping floors, floor scrubbers, etc.  Not recommended for vehicle and truck cleaning as it could swirl the paint.  Will not harm the seals in the floor scrubbers.

INVIRO-CLEAN
1500 FS
(Water Based Product)

Great product for use in mopping applications and in floor scrubbers.  Will not harm seals in floor scrubbers.  FS 1500-W is an NSF approved product for areas around incidental food contact.

INVIRO-CLEAN
4000
(Water Based Product)

This aqueous cleaner is great for removing tough oils and greases from gears in a soaking style cleaning process.  Do NOT use on painted surfaces, will swirl and remove some paint finishes.  Is a great solvent replacement product for people looking to eliminate or reduce VOC emissions.

INVIRO-CLEAN
K-30W
(Water Based Product)

This aqueous cleaner is formulated for the cleaning and brightening (polishing) of metal parts in a vibratory / de-burring application. 

INVIRO-CLEAN
HD DEGREASER
(Water Based Product)

This industrial degreaser aqueous cleaner is great for removing oil residues, especially in medium to hot parts washers.  The product is best used in low agitation systems, as high pressure will cause excessive foam.  Works great when doing non-ferrous metals.

Rust Preventative
Dry Wax Film

INVIROCO
2304-RP
(Solvent RP)

Solvent cut-back RP for 1 year indoor protection.  Leaves a dry, waxy, thin film on the parts.

Rust Preventative
Light Oil Film

INVIROCO
2504-RP
(Solvent RP)

Solvent cut-back RP for 1 year indoor protection.  Leaves an oily film on the parts.

Rust Preventative
Light/ Dry Oil Film

INVIROCO
2462
(Solvent RP)

Rust Preventative
WD 40 Replacement

INVIROCO
42WD
(Solvent RP / Penetrating Oil)

This product is superior to WD 40 in many respects.  Unlike WD 40, our product does contain a rust preventative additive along with the penetrating qualities many mechanics are looking for.