INVIRO-CLEAN 1500 FS is formulated for use in commercial applications.  It is a low viscosity fluid concentrate designed to be diluted with water at various ratios for cleaning, mopping, or scrubbing.  
INVIRO-CLEAN 1500 FS will also remove gummy deposits and caked deposits of dirt, grit, scale, chips, fatty materials, and other sludge forming elements.  INVIRO-CLEAN 1500 FS is non-corrosive, safe, and economical to use.

INVIRO-CLEAN 1500 FS is non-phenolic, contains plant based degreasing agents, and has a pleasant fragrance.

TYPICAL PHYSICAL PROPERTIES

Specific Gravity                                                                                    1.02
pH - 5% SOLUTION:                                                                           9.0-10.0
COLOR AND ODOR:                                                                          Clear/Pleasant Smell
FLASH POINT (concentrate material) OPEN CUP:                        NA
FLASH POINT (use/dilution):                                                           Non-Flammable

APPLICATION/ DILUTION RATES:

Floor scrubbers (walk behind and rider models):                            40:1 Dilution Ratio               (1.25 gal / 50 gal tank)
Pressure washers:                                                                                40:1 Dilution Ratio               (32oz / 10 gal tank)
Mopping:                                                                                              20:1 Dilution Ratio               (32oz / 5 gal pail)
Carpet Spot Cleaning (test for discoloration):                 10:1 Dilution Ratio               (1.2 oz / 12 oz. bottle)

NOTE:  Dilution rates will depend upon the dirt and soil levels, adjustments may need to be made.  Product performs best with hot water, but is still effective in cold water applications.

HEALTH AND SAFETY:  INVIRO-CLEAN 1500 FS is free of Diethanolamines (DEA), and Diethanolamides.  It does not contain any phenolic materials.  Refer to Material Safety Data Sheet for safe handling procedures.

Warranty: Because conditions of use are beyond our control no representation or warranty is made in connection with the use of this product. Technical information and recommendations are believed to be accurate but are not guaranteed.

Industrial Business - Cleaners & Degreasers
Industrial Cleaners and Degreasers for machine shops and some warehouse / distribution centers.

INVIRO-CLEAN
1500 FS
(Water Based Product)

Great product for use in mopping applications and in floor scrubbers.  Will not harm seals in floor scrubbers.  FS 1500-W is an NSF approved product for areas around incidental food contact.

INVIRO-CLEAN
1000
(Water Based Product)

Tremendous product for high temp (150-165F) parts cleaning.  We have had great luck with this product, cleaning smaller parts for the fastener and hydraulic industry and larger parts for Caterpillar/ John Deere.

INVIRO-CLEAN
Neutral Orange
(Water Based Product)

This product is great for use in general cleaning applications like mopping floors, floor scrubbers, etc.  Not recommended for vehicle and truck cleaning as it could swirl the paint.  Will not harm the seals in the floor scrubbers.

INVIRO-CLEAN
4000
(Water Based Product)

This aqueous cleaner is great for removing tough oils and greases from gears in a soaking style cleaning process.  Do NOT use on painted surfaces, will swirl and remove some paint finishes.  Is a great solvent replacement product for people looking to eliminate or reduce VOC emissions.

INVIRO-CLEAN
K-30W
(Water Based Product)

This aqueous cleaner is formulated for the cleaning and brightening (polishing) of metal parts in a vibratory / de-burring application. 

INVIRO-CLEAN
HD DEGREASER
(Water Based Product)

This industrial degreaser aqueous cleaner is great for removing oil residues, especially in medium to hot parts washers.  The product is best used in low agitation systems, as high pressure will cause excessive foam.  Works great when doing non-ferrous metals.

Rust Preventative
Dry Wax Film

INVIROCO
2304-RP
(Solvent RP)

Solvent cut-back RP for 1 year indoor protection.  Leaves a dry, waxy, thin film on the parts.

Rust Preventative
Light Oil Film

INVIROCO
2504-RP
(Solvent RP)

Solvent cut-back RP for 1 year indoor protection.  Leaves an oily film on the parts.

Rust Preventative
Light/ Dry Oil Film

INVIROCO
2462
(Solvent RP)

Rust Preventative
WD 40 Replacement

INVIROCO
42WD
(Solvent RP / Penetrating Oil)

This product is superior to WD 40 in many respects.  Unlike WD 40, our product does contain a rust preventative additive along with the penetrating qualities many mechanics are looking for.