
INVIRO-CLEAN 4000
AN ENVIRONMENTALLY SAFE CLEANER & DEGREASER (Replaces Solvent Cleaners)
(Available in 5 gallon Pails, 55 gallon Drums, 275 gallon Totes)
|
INVIRO-CLEAN 4000 is a heavy-duty, non-petroleum based, high solvency cleaner. It is extremely effective in removing grease, wax, and oil from various surfaces. INVIRO-CLEAN 4000 can be used in parts cleaning equipment and as a low agitation spray cleaner, or soak-type cleaner. INVIRO-CLEAN 4000 has a light pleasant fragrance and is gentle on hands. INVIRO-CLEAN 4000 is particularly well suited for cold cleaning applications.
ADVANTAGES: 1. Quickly penetrates & removes grease, oil, wax, and gummy soil.
- Non-volatile when diluted
- Non-flammable when diluted
- No flash point when diluted
- Non-corrosive.
- pH of 8.3
- Environmentally safe.
APPLICATION: Dilute 1 part INVIRO-CLEAN 4000 with 10 parts water. Soak part or apply with light spray and wipe. Can adjust dilution ratio as need. 1:5 for heavy soils, 1:10 for moderate soil conditions. Let parts soak for 10-15 minutes, longer if necessary to emulsify oil and grease. For ultrasonic cleaning applications, start at a 1:30 dilution ratio-adjust if necessary.
| Dilution: |
5:1 |
10:1 |
15:1 |
20:1 |
30:1 |
Refractometer
Reading: |
4.0 |
1.80 |
1.55 |
1.25 |
0.95 |
Warranty: Because conditions of use are beyond our control, no representation or warranty is made in connection with the use of this product. Technical information and recommendations are believed to be accurate but are not guaranteed.
|
Fleet Business - Cleaners & Degreasers
Industrial Cleaners for the cleaning of trucks, buss lines, construction equipment, and general vehicle cleaning. |
Application |
Product to Use |
General Guidelines |
Part #'s |
Gear Cleaning, Solvent Replacement, Heavy Degreasing Projects |
INVIRO-CLEAN
4000
(Water Based Product) |
This aqueous cleaner is great for removing tough oils and greases from gears in a soaking style cleaning process. Do NOT use on painted surfaces, will swirl and remove some paint finishes. Is a great solvent replacement product for people looking to eliminate or reduce VOC emissions.
Usage: Dilute with water 4:1 to 10:1 depending on the soils. |
#37WIC1 - 5 gal Pail
#37BIC2 - 55 gal Drum
#37BIC3 - 275 gal IBC |
|
Industrial Business - Cleaners & Degreasers
Industrial Cleaners and Degreasers for machine shops and some warehouse / distribution centers. |
Application |
Product to Use |
General Guidelines |
Part #'s |
Solvent Replacement |
INVIRO-CLEAN
4000
(Water Based Product) |
This aqueous cleaner is great for removing tough oils and greases from gears in a soaking style cleaning process. Do NOT use on painted surfaces, will swirl and remove some paint finishes. Is a great solvent replacement product for people looking to eliminate or reduce VOC emissions.
Usage: Dilute with water 4:1 to 10:1 depending on the soils. |
#37WIC1 - 5 gal Pail
#37BIC2 - 55 gal Drum
#37BIC3 - 275 gal IBC |
|
Environmental / Tank Cleaning
These products could be used in the cleaning of tanks prior to inspection or decommissioning. They may also have some use in cleaning stains on concrete (garages, etc.). NOTE: The application of TEAL-SORB prior to tank cleaning is perfect. It removes several of the tenacious residues, and enables you to use far less soap and water when cleaning a tank. This is a very important consideration as the cost of water based effluent for disposal can be rather pricey. |
Application |
Product to Use |
General Guidelines |
Part #'s |
Stain Removal on Concrete |
INVIRO-CLEAN
4000
(Water Based Product) |
This aqueous cleaner is great for removing tough oils and greases from gears in a soaking style cleaning process. Do NOT use on painted surfaces, will swirl and remove some paint finishes. Is a great solvent replacement product for people looking to eliminate or reduce VOC emissions.
Usage: Dilute with water 4:1 to 10:1 depending on the soils.
(Recommended to use TEAL-SORB to pick up as much oil as possible, then clean area with KW 4000).
|
#37WIC1 - 5 gal Pail
#37BIC2 - 55 gal Drum
#37BIC3 - 275 gal IBC |
|
Parts Washers
The Cary Company offers the New Generation of Aqueous Based Parts Washers designed for use with aqueous-based cleaning solutions. |
|
Portable Water-Based Parts Washer
Part#: 37BPWG (Green), 37BPWU (Blue), 37BPWK (Black), 37BPWO (Orange)
Features: |
• Dual filtration system. Pre-filter and drain filter
• Corrosion resistant heavy – duty pump
• Heavy duty rolling cart
• GFCI for added shock resistant safety
• Spigot with fluid control valve
• Heater thermostatically controlled preset to 110 (F)
• Flow-thru brush with adjustable fluid control
• Thermo-well for protection of the thermostat capillary bulb
• Low level fluid sensor
• 10 gallon soaking capacity
• Quick sink removable for easy servicing
• Filter system prolongs fluid life |
Reservoir Working Area:
Sink length 34”
Width 23”
Depth 9”
|
Overall Size:
Length 34”
Width 23”
Height 33”
Capacity 45 Gallons |
|
Bench Top Water-Based Parts Washer
Part#: 37BPW3

Features: |
- Corrosion resistant heavy-duty pump
- Flo-thru brush
- Operating fluid capacity 3 to 4 gallons
- 115 volts .6 amps
- On-off switch built into cord
- Stainless steel lid and top
- Spring loaded door closure
- Heavy-duty, high density polyethylene tank
|
Dimensions:
Tank dimensions: 13-1⁄4”W x 19”L x 7”D
Overall dimensions: 15-1⁄2”W x 21-1⁄2”L x 10-1⁄2”H
Weight: 15 lbs.
|
|
Parts Washers Recommended for Use with INVIRO-CLEAN
4000 or INVIRO-CLEAN
HD DEGREASER |
Call or Email for Pricing
Ph#630-376-2400 or Email: tjtyrrell@thecarycompany.com
Other styles & sizes of Parts Washers are available upon request |
|
|