INVIRO-CLEAN BRAKE PARTS CLEANER is a solvent based cleaning product with special additives that dissolves gummy, oil oxidation products and loosens insoluble residues found when cleaning brakes, gears, and other tough fleet vehicle parts.   This product does contain a petroleum hydrocarbon, so care must be taken for proper use and disposal.

Typical Physical Characteristics

Specific Gravity                                                   0.86
Flash Point: Deg F, min.                                     135-142 F

Warranty:  Because conditions of use are beyond our control, no representation or warranty is made with the use of this product.  Technical information and recommendations are believed to be accurate, but are not guaranteed.

Fleet Business - Cleaners & Degreasers
Industrial Cleaners for the cleaning of trucks, buss lines, construction equipment, and general vehicle cleaning.

INVIRO-CLEAN
Aluma Bright
(Water Based Product)

This product is used to remove dirt and grime from Aluminum surfaces.  Does contain phosphorus and other additives to brighten the aluminum surfaces.  Great for big aluminum tankers or wheel cleaning.  Do not allow product to dry on to the surface.  Will not cause aluminum “blushing”.  Caution should be used during use.

INVIRO-CLEAN
Fleet & Equipment Wash
(Water Based Product)

Great product for removing dirt & soils.  Will not harm paint or finish of vehicles or equipment.  Can be sprayed on or brushed on.  May be mixed with tap water.  Do no allow product to dry on to the vehicle. 

INVIRO-CLEAN
4000
(Water Based Product)

This aqueous cleaner is great for removing tough oils and greases from gears in a soaking style cleaning process.  Do NOT use on painted surfaces, will swirl and remove some paint finishes.  Is a great solvent replacement product for people looking to eliminate or reduce VOC emissions.

INVIRO-CLEAN
 Brake Cleaner & Parts Cleaner
(Solvent Based Product)

This solvent based product is formulated to remove tenacious residues when cleaning brakes, wheel drums, and other parts with hard to remove soils.  With a flash point of 142F, it is a fairly safe to use product.  Also contains some grease cutting and water displacing additives for longer use.

INVIROCO
42WD
(Solvent RP/ Penetrating Oil)

This product is superior to WD 40 in many respects.  Unlike WD 40, our product does contain a rust preventative additive along with the penetrating qualities many mechanics are looking for.  Leaves a light oil film on the part when done.