INVIRO-CLEAN K-30W is an aqueous cleaner formulated for the cleaning and brightening (polishing) of metal parts in a vibratory / de-burring application.  INVIRO-CLEAN K-30W is a mildly acidic compound formulated for providing a clean bright finish on a variety of ferrous metals, and other materials such as zinc, aluminum, and brass.  (NOTE: always test non ferrous metals first before production runs).  INVIRO-CLEAN K-30W will produce a mild foam that helps to lift away dirt and film deposits.  Bright parts will result from use of this product.

TYPICAL PHYSICAL PROPERTIES

                Appearance:                                                         Clear Blue
                Viscosity:                                                              Water Thin
                Specific Gravity:                                                  1.02
                pH Concentrate:                                                  6.5
                Metal Staining:                                                    NA
                Flash Point:                                                           NA

APPLICATION DILUTION RATES:

Parts burnishing machines:                                                20:1

HEALTH AND SAFETY: INVIRO-CLEAN K-30W is free of Diethanolamines (DEA), and Diethanolamides.  It does not contain any phenolic materials.  Refer to Material Safety Data Sheet for safe handling procedures. 

Warranty:  Because conditions of use are beyond our control no representation or warranty is made in connection with the use of this  product.  Technical information and recommendations are believed to be accurate but are not guaranteed.

Industrial Business - Cleaners & Degreasers
Industrial Cleaners and Degreasers for machine shops and some warehouse / distribution centers.

INVIRO-CLEAN
Neutral Orange
(Water Based Product)

This product is great for use in general cleaning applications like mopping floors, floor scrubbers, etc.  Not recommended for vehicle and truck cleaning as it could swirl the paint.  Will not harm the seals in the floor scrubbers.

INVIRO-CLEAN
1500 FS
(Water Based Product)

Great product for use in mopping applications and in floor scrubbers.  Will not harm seals in floor scrubbers.  FS 1500-W is an NSF approved product for areas around incidental food contact.

INVIRO-CLEAN
1000
(Water Based Product)

Tremendous product for high temp (150-165F) parts cleaning.  We have had great luck with this product, cleaning smaller parts for the fastener and hydraulic industry and larger parts for Caterpillar/ John Deere.

INVIRO-CLEAN
4000
(Water Based Product)

This aqueous cleaner is great for removing tough oils and greases from gears in a soaking style cleaning process.  Do NOT use on painted surfaces, will swirl and remove some paint finishes.  Is a great solvent replacement product for people looking to eliminate or reduce VOC emissions.

INVIRO-CLEAN
K-30W
(Water Based Product)

This aqueous cleaner is formulated for the cleaning and brightening (polishing) of metal parts in a vibratory / de-burring application. 

INVIRO-CLEAN
HD DEGREASER
(Water Based Product)

This industrial degreaser aqueous cleaner is great for removing oil residues, especially in medium to hot parts washers.  The product is best used in low agitation systems, as high pressure will cause excessive foam.  Works great when doing non-ferrous metals.

Rust Preventative
Dry Wax Film

INVIROCO
2304-RP
(Solvent RP)

Solvent cut-back RP for 1 year indoor protection.  Leaves a dry, waxy, thin film on the parts.

Rust Preventative
Light Oil Film

INVIROCO
2504-RP
(Solvent RP)

Solvent cut-back RP for 1 year indoor protection.  Leaves an oily film on the parts.

Rust Preventative
Light/ Dry Oil Film

INVIROCO
2464
(Solvent RP)

Rust Preventative
WD 40 Replacement

INVIROCO
42WD
(Solvent RP / Penetrating Oil)

This product is superior to WD 40 in many respects.  Unlike WD 40, our product does contain a rust preventative additive along with the penetrating qualities many mechanics are looking for.