INVIROCO 42WD is a lubricating, penetrating, cleansing, and rust preventive fluid designed for a multitude of applications.  INVIROCO 42WD is unique in that it maintains a moist film to cover chains, parts and wire rope.  However, this film acts as a cleaning agent and does not pick up dust or dirt.  In the lubrication of wire and rope, INVIROCO 42WD is able to penetrate the individual strands and reduce the friction between these strands.  The same principle applies to the lubrication of roller chains -- the inside links receive the required penetration; while at the same time cleansing and lubricating the inside and outside of the links.

This product is superior to WD 40 in many respects.  Unlike WD 40, our product does contain a rust preventative additive along with the penetrating qualities many mechanics are looking for.  Leaves a light oil film on the part when done.

TYPICAL PHYSICAL PROPERTIES

                                Viscosity SUS @ 100F                                                        <32
                                Flash Point, F.                                                                       120
                                Pour Point, F.                                                                        -40
                                Specific Gravity                                                                   0.81
                                Color                                                                                      clear brown

APPLICATION:

INVIROCO 42WD is to be used in applications where a water displacing rust preventative/ lubricant is needed.

HEALTH AND SAFETY:  INVIROCO 42WD contains rust preventative additives, petroleum hydrocarbons, and solvents.  Refer to Material Safety Data Sheet for safe handling procedures.

Warranty: Because conditions of use are beyond our control, no representation or warranty is made in connection with the use of this product. Technical information and recommendations are believed to be accurate but are not guaranteed.

Fleet Business - Cleaners & Degreasers
Industrial Cleaners for the cleaning of trucks, buss lines, construction equipment, and general vehicle cleaning.

INVIRO-CLEAN
Fleet & Equipment Wash
(Water Based Product)

Great product for removing dirt & soils.  Will not harm paint or finish of vehicles or equipment.  Can be sprayed on or brushed on.  May be mixed with tap water.  Do no allow product to dry on to the vehicle. 

INVIRO-CLEAN
Aluma Bright
(Water Based Product)

This product is used to remove dirt and grime from Aluminum surfaces.  Does contain phosphorus and other additives to brighten the aluminum surfaces.  Great for big aluminum tankers or wheel cleaning.  Do not allow product to dry on to the surface.  Will not cause aluminum “blushing”.  Caution should be used during use.

INVIRO-CLEAN
4000
(Water Based Product)

This aqueous cleaner is great for removing tough oils and greases from gears in a soaking style cleaning process.  Do NOT use on painted surfaces, will swirl and remove some paint finishes.  Is a great solvent replacement product for people looking to eliminate or reduce VOC emissions.

INVIRO-CLEAN
 Brake Cleaner & Parts Cleaner
(Solvent Based Product)

This solvent based product is formulated to remove tenacious residues when cleaning brakes, wheel drums, and other parts with hard to remove soils.  With a flash point of 142F, it is a fairly safe to use product.  Also contains some grease cutting and water displacing additives for longer use.

INVIROCO
 BC Degreaser
(Solvent Based Product)

INVIROCO BC Degreaser, for cleaning breaks and drum cleaning, is a chemical formulation developed to remove tenacious grease and oil residues, including deposits left by oxidation like varnish. 

INVIROCO
42WD
(Solvent RP/ Penetrating Oil)

This product is superior to WD 40 in many respects.  Unlike WD 40, our product does contain a rust preventative additive along with the penetrating qualities many mechanics are looking for.  Leaves a light oil film on the part when done.

Rust Preventatives

Rust Preventative
Dry Wax Film

INVIROCO
2304-RP
(Solvent RP)

Solvent cut-back RP for 1 year indoor protection.  Leaves a dry, waxy, thin film on the parts.

Rust Preventative
Light Oil Film

INVIROCO
2504-RP
(Solvent RP)

Solvent cut-back RP for 1 year indoor protection.  Leaves an oily film on the parts.

Rust Preventative
Light/ Dry Oil Film

INVIROCO
2464
(Solvent RP)

Rust Preventative
WD 40 Replacement

INVIROCO
42WD
(Solvent RP / Penetrating Oil)

This product is superior to WD 40 in many respects.  Unlike WD 40, our product does contain a rust preventative additive along with the penetrating qualities many mechanics are looking for.