INVIRO-CLEAN NEUTRAL ORANGE is a time tested product of the INVIROCO line for use in commercial applications.  It is a low viscosity fluid concentrate designed to be diluted with water at various ratios for cleaning.  Depending upon the dilution, INVIRO-CLEAN NEUTRAL ORANGE functions well as a potent cleaner and degreaser when used at concentrations of 2% to 4% in water.  It will also remove gummy deposits and caked deposits of dirt, grit, scale, chips, fatty materials, and other sludge forming elements.  INVIRO-CLEAN NEUTRAL ORANGE is non-corrosive, safe, and economical to use.  (Product is very effective for cleaning machine tool interiors and exteriors.  Product will not affect the coolant emulsions in the system.  NOTE:  Not intended as a vehicle wash, as the product may swirl the paint.

INVIRO-CLEAN NEUTRAL ORANGE is non-phenolic, and of pleasant odor.  For industrial use, INVIRO-CLEAN NEUTRAL ORANGE dilution levels are measurable with a hand held refractometer.

TYPICAL PHYSICAL PROPERTIES

Specific Gravity                                                                                   1.0
pH - 5% SOLUTION:                                                                         9.0-10.0
COLOR AND ODOR:                                                                         Clear/Pleasant Smell
FLASH POINT (concentrate material) OPEN CUP:                     NA
FLASH POINT (use/dilution):                                                           Non-Flammable

APPLICATION DILUTION RATES:

Floor scrubbers:                                                                                   1-6% by volume of water
Pressure washers:                                                                 1-5% by volume of water
Mopping:                                                                                              2-6% by volume of water
Machine Cleaning (Exterior & Interior):                                         2-4% by volume of water

NOTE:  Dilution rates will depend upon the dirt and soil levels, adjustments may need to be made.

HEALTH AND SAFETY:  INVIRO-CLEAN NEUTRAL ORANGE is free of Diethanolamines (DEA), and Diethanolamides.  It does not contain any phenolic materials.  Refer to Material Safety Data Sheet for safe handling procedures.

Warranty: Because conditions of use are beyond our control no representation or warranty is made in connection with the use of this product. Technical information and recommendations are believed to be accurate but are not guaranteed.

Industrial Business - Cleaners & Degreasers
Industrial Cleaners and Degreasers for machine shops and some warehouse / distribution centers.

INVIRO-CLEAN
Neutral Orange
(Water Based Product)

This product is great for use in general cleaning applications like mopping floors, floor scrubbers, etc.  Not recommended for vehicle and truck cleaning as it could swirl the paint.  Will not harm the seals in the floor scrubbers.

INVIRO-CLEAN
1500 FS
(Water Based Product)

Great product for use in mopping applications and in floor scrubbers.  Will not harm seals in floor scrubbers.  FS 1500-W is an NSF approved product for areas around incidental food contact.

INVIRO-CLEAN
1000
(Water Based Product)

Tremendous product for high temp (150-165F) parts cleaning.  We have had great luck with this product, cleaning smaller parts for the fastener and hydraulic industry and larger parts for Caterpillar/ John Deere.

INVIRO-CLEAN
4000
(Water Based Product)

This aqueous cleaner is great for removing tough oils and greases from gears in a soaking style cleaning process.  Do NOT use on painted surfaces, will swirl and remove some paint finishes.  Is a great solvent replacement product for people looking to eliminate or reduce VOC emissions.

INVIRO-CLEAN
K-30W
(Water Based Product)

This aqueous cleaner is formulated for the cleaning and brightening (polishing) of metal parts in a vibratory / de-burring application. 

INVIRO-CLEAN
HD DEGREASER
(Water Based Product)

This industrial degreaser aqueous cleaner is great for removing oil residues, especially in medium to hot parts washers.  The product is best used in low agitation systems, as high pressure will cause excessive foam.  Works great when doing non-ferrous metals.

Rust Preventative
Dry Wax Film

INVIROCO
2304-RP
(Solvent RP)

Solvent cut-back RP for 1 year indoor protection.  Leaves a dry, waxy, thin film on the parts.

Rust Preventative
Light Oil Film

INVIROCO
2504-RP
(Solvent RP)

Solvent cut-back RP for 1 year indoor protection.  Leaves an oily film on the parts.

Rust Preventative
Light/ Dry Oil Film

INVIROCO
2462
(Solvent RP)

Rust Preventative
WD 40 Replacement

INVIROCO
42WD
(Solvent RP / Penetrating Oil)

This product is superior to WD 40 in many respects.  Unlike WD 40, our product does contain a rust preventative additive along with the penetrating qualities many mechanics are looking for.

Environmental / Tank Cleaning
These products could be used in the cleaning of tanks prior to inspection or decommissioning.  They may also have some use in cleaning stains on concrete (garages, etc.).  NOTE:  The application of TEAL-SORB prior to tank cleaning is perfect.  It removes several of the tenacious residues, and enables you to use far less soap and water when cleaning a tank.  This is a very important consideration as the cost of water based effluent for disposal can be rather pricey.

INVIRO-CLEAN
Neutral Orange
(Water Based Product)

This product is great for use in general cleaning applications like mopping floors, floor scrubbers, etc.  Not recommended for vehicle and truck cleaning as it could swirl the paint.  Will not harm the seals in the floor scrubbers.

Stain Removal on Concrete

INVIRO-CLEAN
4000
(Water Based Product)

INVIROCO
5554-RP
(Oil Based RP)

After a tank has been cleaned, it may be sprayed with CG 4555 to protect it.  CG 4555 has excellent rust protection qualities in the presence of corrosive materials.