| |
Filter Cartridge
|
Description
|
General Applications
|
|
|
|
Thermally bonded filter media with graded density pore structure provides highly consistent removal efficiency and enhanced dirt holding capacity.
|
Food and Beverage, Process Water, Potable Water, Photographic, Cosmetic, Aerosol Products, Electronics, Water Based Paints and Coatings, Printed Circuit, Plating
|
|
|
|
Designed to meet the standards of a wide variety of industries. High grade inorganic glass filter media is used for all applications at an economical cost. |
Adhesives, Gasoline, Solvents, Oils, Paints & Varnishes, Inks, Resins, Lithography and Photographic Chemicals, Aerosol products |
|
|
String Wound Cartridges
|
Full selection of filter media's, micron sizes, lengths, 2.5" and 4" diameters, to provide the best possible combination to meet your particular needs. Economical, yet can be depended on in the most demanding industrial environment. |
Chemicals, magnetic coatings, photographic, food & beverage, cosmetics, oil production, healthcare, plating solutions, cleaning fluids |
|
|
Pleated Filter Cartridges
|
Available in Industrial Grade (nominal rated) and High Efficiency (absolute rated) polypropylene, polyester, or glass micro fiber media's, 10" through 40" lengths, with end cap configurations to fit all housings. Excellent option to resin bonded, melt-blown, or string wound cartridges where higher efficiency and longer life are desired. |
Electronics, food & beverage, coatings, pharmaceutical, chemical, photographic, high purity water, precious metal/catalyst recovery |
|
|
Cartridge Housings
|
Description
|
|
|
Single Cartridge Filter Housing
|
Sizes available 5" to 30" length, with material options of cast iron/steel, brass nickel plated head with 304L SS sump, all 304L SS construction, all 316L SS construction, 1/2"NPT to 1"NPT inlet/outlet connections. |
|
|
Multi Cartridge Filter Housing
|
4, 5, 7, 12, or 22 round configurations, with V-band or swing-bolt closures for quick cartridge changes, 304L or 316L stainless steel construction (non-ASME), 10" through 40" length cartridge with double open end standard. Designs available to accept -222 or -226 O-ring style single open end cartridges. Options include sanitary connections, electro polish surface finish, gauge ports, mounting tabs or legs. Other ASME designs available. |
|
