Our Premier tanks are made of 10 gauge thick, top, sides and bottom. They are UN tested and tagged, and equipped with a 1" slope bottom design, a 2" ball valve with locking handle and a full-length protection guard. A 15-degree adapter is available to facilitate attaching discharge hoses. |
Price: $1,885.00 ea
FOB Beatrice, NE or Round Lake, IL |
180 Gallon Stainless Steel Intermediate Bulk Container
Part#: 26BS18
Dimensions: Base 42" x 48" Height 27"
Weight: 312 lbs.
Capacity: 180 Gallons
Made of: 304 Stainless steel, and other materials are available |
Price: $2,085.00 ea
FOB Beatrice, NE or Round Lake, IL |
250 Gallon Stainless Steel Intermediate Bulk Container
Part#: 26BS25
Dimensions: Base 42" x 48" Height 35"
Weight: 355 lbs.
Capacity: 250 Gallons
Made of: 304 Stainless steel, and other materials are available |
Price: $2,146.00 ea
FOB Beatrice, NE or Round Lake, IL |
350 Gallon Stainless Steel Intermediate Bulk Container
Part#: 26BS35
Dimensions: Base 42" x 48" Height 47"
Weight: 470 lbs.
Capacity: 350 Gallons
Made of: 304 Stainless steel, and other materials are available |
Price: $2,796.80 ea
FOB Beatrice, NE or Round Lake, IL |
550 Gallon Stainless Steel Intermediate Bulk Container
Part#: 26BS55
Dimensions: Base 42" x 48" Height 71"
Weight: 645 lbs.
Capacity: 550 Gallons
Made of: 304 Stainless steel, and other materials are available |
PREMIER IBC SPECIFICATIONS
Material: 10 gauge type 304 stainless steel top, bottom & shell
Material Finish: 2B rolled finish
Interior Weld Finish: As laid with discoloration removed, cleaned of all weld slag and splatter.
Exterior Weld Finish: All welds to be continuous with discoloration removed, cleaned of all weld slag and splatter.
Manway: Nominal 22-1/2" drum cover/3" nipple with EPDM gasket, plated carbon steel clamp ring bolt and nut
Fusible Device : 3" fusible device with Teflon gasket mounted in center of lid
Nozzles: Top of tank to have (1) 2" diameter bung w/ plug & Buna-N gasket
Lifting Lugs : Four (4) "off shore" lifting lugs/leg positioners to allow stacking as well as lifting from overhead
Decals: Caution do not pressurize, No forks this side, Valve open-closed, Vent tank prior to discharge
Bottom Design: 1" one piece sloped bottom for virtual 100% drainage
Support Legs: 5-1/2" snag resistant support legs for lift truck handling
Discharge: 2" diameter ball valve with lockable handle and polymeric shipping seal
Valve Guard: Full length valve protection guard
DOT/UN: Tested and tagged per DOT Title 49 specifications 31A/Y
|
Replacement Parts Also Available |
