G-10

Cary Code# 26WRIF (Manual)
Cary Code# 26WRIF (Pneumatic)
For use with 2" VISEGRIP® cap seals and SAFESEAL® plastic caps

G-10 2" Visegrip® Crimping Tool
Cary Code# 26WRIF - Manual
Cary Code# 26B2PN - Pneumatic

RIEKE® manual crimping tools, for use on both metal Visegrip®and Safeseal® plastic seals, are specially designed to crimp cap seals in one easy motion. They have a built-in, automatic compensator which enables use of these tools with drum stock ranging from 24 to 16 gauge. This important feature ensures a perfect seal every time, and is especially valuable because drum stocks within the same nominal gauge size often vary in thickness.

For use with 2" VISEGRIP® cap seals and SAFESEAL® plastic caps

Usage Note: The G-10 can only be used on containers using VISEGRIP® drum closures.

GV-10

Cary Code# 26WGV1
For use with 2" VISEGRIP II® cap seals

GV-10 2" Visegrip II® Crimping Tool
Cary Code# 26WGV1

RIEKE® manual crimping tools, for use on metal Visegrip II® capseals, are specially designed to crimp cap seals in one easy motion. They have a built-in, automatic compensator which enables use of these tools with drum stock ranging from 24 to 16 gauge. This important feature ensures a perfect seal every time, and is especially valuable because drum stocks within the same nominal gauge size often vary in thickness.

For use with 2" VISEGRIP II® cap seals

Usage Note: The GV-10 can only be used on containers using VISEGRIP II® drum closures.

G-30

Cary Code# 26WRIG
For use with 3/4" VISEGRIP® cap seals and SAFESEAL® plastic caps

G-30 3/4" Visegrip® Crimping Tool
Cary Code# 26WRIG

RIEKE® manual crimping tools, for use on both metal Visegrip®and Safeseal® plastic seals, are specially designed to crimp cap seals in one easy motion. They have a built-in, automatic compensator which enables use of these tools with drum stock ranging from 24 to 16 gauge. This important feature ensures a perfect seal every time, and is especially valuable because drum stocks within the same nominal gauge size often vary in thickness.

For use with 3/4" VISEGRIP® cap seals and SAFESEAL® plastic caps

Usage Note: The G-30 can only be used on containers using VISEGRIP® drum closures.

GV-30

Cary Code# 26WGV3
For use with 3/4" VISEGRIP II® cap seals

GV-30 3/4" Visegrip II® Crimping Tool
Cary Code# 26WGV3

RIEKE® manual crimping tools, for use on metal Visegrip II® capseals, are specially designed to crimp cap seals in one easy motion. They have a built-in, automatic compensator which enables use of these tools with drum stock ranging from 24 to 16 gauge. This important feature ensures a perfect seal every time, and is especially valuable because drum stocks within the same nominal gauge size often vary in thickness.

For use with 3/4" VISEGRIP II® cap seals

Usage Note: The GV-30 can only be used on containers using VISEGRIP II® drum closures.

Economy Brand Crimping Tools

Cary Code# 26WAM2
Cary Code# 26WAM3

 

Economy Round-Head Manual Crimping Tools for Steel Capseals
$195.00 each
For crimping Tri-Sure Equivalent steel and aluminum capseals on Tri-Sure round-head drum plugs. Tools available for 3/4" and 2" capseals.

Cary Code# 26WAM2 - Manual Crimping Tool for use with 2" Steel Round-Head cap seals

Cary Code# 26WAM3 - Manual Crimping Tool for use with 3/4" Steel Round-Head cap seals

Tri-Sure® Approved Crimping Tools

Cary Code# 26WAM9 (Manual)
Cary Code# 26WAM0 (Manual)
Cary Code# 26WAM8 (Manual)
Cary Code# 26WAM1 (Manual)
Cary Code# 26BPN4 (Pneumatic)
Cary Code# 26BPN5 (Pneumatic)
Cary Code# 26BPN2 (Pneumatic)
Cary Code# 26BPN3 (Pneumatic)

Tri-Sure® Round-Head Manual Crimping Tools for Tri-Sure® Steel Capseals

For crimping Tri-Sure® steel capseals on round-head drum plugs. Tools available for 3/4" and 2" capseals.

Cary Code # 26WAM9 - Manual Crimping Tool for 2" Round-Head Steel Capseals w/ Corner Gaskets
Cary Code# 26WAM0 - Manual Crimping Tool for 3/4" Round-Head Steel Capseals w/ Corner Gaskets
Cary Code # 26WAM8 - Manual Crimping Tool for 2" Round-Head Steel Capseals w/ Side Gaskets
Cary Code# 26WAM1 - Manual Crimping Tool for 3/4" Round-Head Steel Capseals w/ Side Gaskets
Cary Code # 26BPN4 - Pneumatic Crimping Tool for 2" Round-Head Steel Capseals w/ Corner Gaskets
Cary Code# 26BPN5 - Pneumatic Crimping Tool for 3/4" Round-Head Steel Capseals w/ Corner Gaskets
Cary Code # 26BPN2 - Pneumatic Crimping Tool for 2" Round-Head Steel Capseals w/ Side Gaskets
Cary Code# 26BPN3 - Pneumatic Crimping Tool for 3/4" Round-Head Steel Capseals w/ Side Gaskets

Tri-Sure® Approved Crimping Tools

Cary Code# 26WAM5 (Manual)
Cary Code# 26WAM4 (Manual)
Cary Code# 26BPN8 (Pneumatic)
Cary Code# 26BPN9 (Pneumatic)

Tri-Sure® Round-Head Manual Crimping Tools for Tri-Sure Plastic Capseals w/ Aluminum Rings

For crimping Tri-Sure® plastic capseals w/ aluminum rings on round-head drum plugs. Tools available for 3/4" and 2" capseals.

Cary Code # 26WAM5 - Manual Crimping Tool for 2" Round-Head Plastic Capseals w/ Aluminum Ring #26WTP2

Cary Code# 26WAM4 - Manual Crimping Tool for 3/4" Round-Head Plastic Capseals w/ Aluminum Ring #26WTP3

Cary Code # 26BPN8 - Pneumatic Crimping Tool for 2" Round-Head Plastic Capseals w/ Aluminum Ring #26WTP2

Cary Code# 26BPN9 - Pneumatic Crimping Tool for 3/4" Round-Head Plastic Capseals w/ Aluminum Ring #26WTP3

Tri-Sure® Approved Crimping Tools

Cary Code# 26WAM7 (Manual)
Cary Code# 26WAM6 (Manual)
Cary Code# 26BPN7 (Pneumatic)
Cary Code# 26BPN6 (Pneumatic)

Tri-Sure® Round-Head Manual Crimping Tools for Tri-Sure® Aluminum Capseals

For crimping Tri-Sure® aluminum capseals on round-head drum plugs. Tools available for 3/4" and 2" capseals.

Cary Code # 26WAM7 - Manual Crimping Tool for 2" Round-Head Aluminum Capseals #26WTS4

Cary Code# 26WAM6 - Manual Crimping Tool for 3/4" Round-Head Aluminum Capseals #26WTS5

Cary Code # 26BPN7 - Pneumatic Crimping Tool for 2" Round-Head Aluminum Capseals #26WTS4

Cary Code# 26BPN6 - Pneumatic Crimping Tool for 3/4" Round-Head Aluminum Capseals #26WTS5

Rieke® Approved Crimping Tools

Cary Code# 26WRIC (Manual)
Cary Code# 26B1PN (Pneumatic)

Rieke® Flexspout® Crimping Tools

Cary Code# 26WRIC - FS-600 Manual Crimping Tool for sealing FLEXSPOUT® units on pails and cans

Cary Code# 26B1PN - IA-FS-600 Pneumatic Crimping Tool for sealing FLEXSPOUT® units on pails and cans

Features 12 collets and seals on all gauges of steel as well as plastic.

In one stroke seals the FLEXSPOUT® closure to the pail

Cary Code# 26WAMC (Manual)
Cary Code# 26BPN1 (Standard Pneumatic)
Cary Code# 26BPNB (Bench Mounted Pneumatic)
Cary Code# 26BPNU (Push Button Pneumatic)
Cary Code# 26BPNA (Air Hydraulic Pneumatic)

Tri-Sure® UNI-GRIP® Crimping Tools
Cary Code# 26WAMC - Manual Crimping Tool for sealing UNI-GRIP® spouts on pails and cans.
Cary Code# 26BPN1 - Standard Pneumatic Crimping Tool for sealing UNI-GRIP® spouts on pails and cans.
Cary Code# 26BPNB - Bench Mounted Double Action Pneumatic Crimping Tool for sealing UNI-GRIP® spouts on pails and cans.
Cary Code# 26BPNU - Push Button Pneumatic Crimping Tool for sealing UNI-GRIP® spouts on pails and cans.
Cary Code# 26BPNA - Air Hydraulic Pneumatic Crimping Tool for sealing UNI-GRIP® spouts on pails and cans.

For sealing UNI-GRIP® spouts on pails and cans.
Features 18 jaw segments for a reliable, uniform and secure seal.

Cary Code# 26WTSW
- For 2" & 3/4" Tri-Sure® Steel/Zinc Plugs w/ Rubber Gasket
Cary Code# 26WTTS
- For 2" & 3/4" Tri-Sure® Steel/Zinc Plugs w/ Poly Gasket
Cary Code# 26WTSP
- For 2" & 3/4" Tri-Sure®Nylon/PP Plugs w/ Poly or Rubber Gasket

Tri-Sure® Combo (2" & 3/4") Preset Breakaway Torque Wrenches
Wrenches for use on Tri-Sure® (Round Head) 2" & 3/4" Drum Plugs

Cary Code# 26WTSW -Trisure #845450383 Preset Torque Wrench for use on Tri-Sure Steel/Zinc Drum Plugs w/ Rubber Gasket (EPDM, BUNA)
- 3/4" Torque Setting = 8-15 ft. lbs.
- 2 " Torque Setting = 15-22 ft. lbs.

Cary Code# 26WTTS - Trisure #845450393 Preset Torque Wrench for use on Tri-Sure Steel/Zinc Drum Plugs w/ Poly Gasket (Polyirradiated)
- 3/4" Torque Setting = 11-18 ft. lbs.
- 2 " Torque Setting = 15-22 ft. lbs.

Cary Code# 26WTSP - Trisure #845450363 Preset Torque Wrench for use on Tri-Sure Nylon/Polypropylene Drum Plugs w/ Poly Gasket or Rubber Gasket (Polyirradiated, EPDM, BUNA)
- 3/4" Torque Setting = 8-11 ft. lbs.
- 2 " Torque Setting = 15-22 ft. lbs.

Cary Code# 26WSSP
- Sparkless for 2" & 3/4" Tri-Sure® Nylon/PP Plugs w/ Poly Gasket
Cary Code# 26WSSC
- Sparkless for 2" & 3/4" Tri-Sure® Nylon/PP Plugs w/ Rubber Gasket
Cary Code# 26WSSW
- Sparkless for 2" & 3/4" Tri-Sure® Steel/Zinc Plugs w/ Rubber Gasket
Cary Code# 26WSTS
- Sparkless for 2" & 3/4" Tri-Sure® Steel/Zinc Plugs w/ Poly Gasket

Tri-Sure® & Tri-Sure Equivalent (Round-Head) Non-Spark Combo (2" & 3/4") Preset Breakaway Torque Wrenches
Sparkless Wrenches for use on Tri-Sure® (Round Head) 2" & 3/4" Drum Plugs

Cary Code# 26WSSP - Sparkless Preset Torque Wrench for use on Tri-SureNylon/Polypropylene Drum Plugs w/ Poly Gasket (Polyirradiated)
- 3/4" Torque Setting = 9 ft. lbs.
- 2 " Torque Setting = 20 ft. lbs

Cary Code# 26WSSC - Sparkless Preset Torque Wrench for use on Tri-SureNylon/Polypropylene Drum Plugs w/ Rubber Gasket (EPDM, BUNA)
- 3/4" Torque Setting = 8-11 ft. lbs.
- 2 " Torque Setting = 15-22 ft. lbs.

Cary Code# 26WSSW - Sparkless Preset Torque Wrench for use on Tri-Sure Steel/Zinc Drum Plugs w/ Rubber Gasket (EPDM, BUNA)
- 3/4" Torque Setting = 8-15 ft. lbs.
- 2 " Torque Setting = 15-22 ft. lbs

Cary Code# 26WSTS - Trisure #845460393 Sparkless Preset Torque Wrench for use on Tri-Sure Steel/Zinc Drum Plugs w/ Poly Gasket (Polyirradiated)
- 3/4" Torque Setting = 11-18 ft. lbs.
- 2 " Torque Setting = 15-22 ft. lbs.

Cary Code# 26W167
Cary Code# 26WS67 (Sparkless)

W-167 Combination Drum Wrench
Cary Code# 26W167
&
W-167S Sparkless Combination Drum Wrench
Cary Code# 26WS67

Hexagonal sockets fit over either the 3/4" or 2" VISEGRIP® steel plugs.
Works on standard Rieke 2” agitator bung.
(This tools does not work on VISEGRIP II Plugs)

Cary Code# 26W168
Cary Code# 26W16S (Sparkless)

W-168 Combination Drum Wrench
Cary Code# 26W168
&
W-168S Sparkless Combination Drum Wrench
Cary Code# 26W16S

Pronghead fits 3/4" and 2" plastic and steel plugs.
Works on RIEKE® VISEGRIP®, VISEGRIP® II, or POLY-VISEGRIP® plugs.

RIEKE® wrenches are highly versatile for a variety of applications. Sparkless needed for use on drums with combustible materials.

Cary Code# 26WWPT (Torque Setting = 30/15)
Cary Code# 26WWPS (Torque Setting = 40/20)
Cary Code# 26WWPP (Torque Setting = 20/9)

W-168PT Preset Torque Wrench for Rieke® VISEGRIP® Plugs
Takes the guesswork out of closure tightening.
Proper torque setting for each size closure is built-in

Cary Code# 26WWPT - W-168PT Red Preset Torque Wrench
- Torque setting = 30/15 (Red) For use with VISEGRIP® or VISEGRIP® II plugs with EPDM, VISECAR® (BUNA) or DAPON® gaskets

Cary Code# 26WWPS - W-168PT Blue Preset Torque Wrench
- Torque setting = 40/20 (Blue) For use with VISEGRIP® or VISEGRIP® II plugs with POLYSEAL® (polyirradiated) gaskets

Cary Code# 26WWPP - W-168PT Yellow Preset Torque Wrench
- Torque setting = 20/9 (Yellow) For use on plastic drums with POLY-VISEGRIP® plugs w/ EPDM gaskets

Cary Code# 26WSPW (Torque Setting = 30/15)
Cary Code# 26WSPS (Torque Setting = 40/20)
Cary Code# 26WSPP (Torque Setting = 20/9)

W-168SPT Preset Sparkless Torque Wrench for Rieke® VISEGRIP® Plugs
Takes the guesswork out of closure tightening.
Proper torque setting for each size closure is built-in

Cary Code# 26WSPW - W-168SPT Red Preset Sparkless Torque Wrench
- Torque setting = 30/15 (Red) For use with VISEGRIP® or VISEGRIP® II plugs with EPDM, VISECAR® (BUNA) or DAPON® gaskets

Cary Code# 26WSPS - W-168SPT Blue Preset Sparkless Torque Wrench
- Torque setting = 40/20 (Blue) For use with VISEGRIP® or VISEGRIP® II plugs with POLYSEAL® (polyirradiated) gaskets

Cary Code# 26WSPP - W-168SPT Yellow Preset Sparkless Torque Wrench
- Torque setting = 20/9 (Yellow) For use on plastic drums with POLY-VISEGRIP® plugs w/ EPDM gaskets.

Cary Code# 26W126
Cary Code# 26W26S (Sparkless)

W-126 Spinner Wrench
Cary Code# 26W126
&
W-126S Sparkless Spinner Wrench
Cary Code# 26W26S

- Designed to tighten or remove VISEGRIP® and VISEGRIP® II plugs quickly and efficiently
- For 2"steel plugs

Cary Code# 26W268
Cary Code# 26W68S (Sparkless)

W-268 Combination Drum Wrench for Rieke® TITEGRIP® Plugs
Cary Code# 26W268
&
W-268S Sparkless Combination Drum Wrench for Rieke® TITEGRIP® Plugs
Cary Code# 26W68S

For use on 3/4" and 2" RIEKE® TITEGRIP® plugs.

Cary Code# 26WWPR
- Torque Setting = 30/15
Cary Code# 26WWPY
- Torque Setting = 20/9
Cary Code# 26WSPR
- *Sparkless* Torque Setting = 30/15
Cary Code# 26WSPY
- *Sparkless* Torque Setting = 20/9

W-268PT & W-268SPT Preset Torque Wrench for Rieke® TITEGRIP® Plugs
Takes the guesswork out of closure tightening.
Proper torque setting for each size closure is built-in

Cary Code# 26WWPR - W-268PT Red Preset Torque Wrench
- Torque setting = 30/15 (Red) For use with TITEGRIP® plugs with EPDM, VISECAR® (BUNA) or DAPON® gaskets

Cary Code# 26WWPY - W-268PT Yellow Preset Torque Wrench
- Torque setting = 20/9 (Yellow) For use with POLY-TITEGRIP® plugs with EPDM Gaskets.

Cary Code# 26WSPR - W-268SPT Red Sparkless Preset Torque Wrench
- Torque setting = 30/15 (Red) For use with TITEGRIP® plugs with EPDM, VISECAR® (BUNA) or DAPON® gaskets

Cary Code# 26WSPY - W-268SPT Yellow Sparkless Preset Torque Wrench
- Torque setting = 20/9 (Yellow) For use with POLY-TITEGRIP® plugs with EPDM Gaskets.

Cary Code# 30WATW

Premium 3/8" Drive Adjustable Torque Wrench
Code# 30WATW - For use with all 3/4" and 2" sockets for Round-Head and Hex-Head Plug. Torque Range 5 - 45 ft.-lb. Comes with a 3/8" drive.

**Sockets Sold Separately (see below)**

Cary Code# 30WATE

3/8" Drive Adjustable Torque Wrench
Code# 30WATE - For use with all 3/4" and 2" sockets for Round-Head and Hex-Head Plug. Torque Range 5 - 80 ft.-lb. Comes with a 3/8" drive.

**Sockets Sold Separately (see below)**

Please note all of these sockets are designed to work with 3/8” drive torque wrenches.

Sparkless Sockets
Code# 30W34H - Sparkless Socket for 3/4" Hex-Head Plugs
Code# 30W34R - Sparkless Socket for 3/4" Round-Head Plugs
Code# 30W2HR - Sparkless Socket for 2 " Round-Head & Hex-Head Plugs

Please note all 3 of these sockets are designed to work with 3/8” drive torque wrenches.

Cary Code# 30W2EB & 30W3EB

European Buttress Sockets
Code# 30W2EB - 2" Six Knock Socket for European Buttress Plugs, 3/8" Drive
Code# 30W3EB - 2" Six Knock Socket for European Buttress Plugs, 1/2" Drive

Cary Code# 57W70W

70mm Wrench Head w/ Handle
Code# 57W70W - 70mm Wrench Head w/ Handle

Designed to work with 3/8” drive torque wrenches.

Cary Code# 21BSKT

Eye Hand Socket

1/2" Socket used for removing and installing eye nuts on filter vessels. Fits onto a standard ½” drive ratchet. Made from high strength aluminum. Wrench Sold Separately.

Code# 21BSKT - 1/2" Socket for Filter Vessel Maintenance

Torque Wrench Tester
For use with Adjustable Torque Wrench (30WATW)

Cary Code# 30B5TT - 0 to 50 Ft/Lb. Torque Wrench Tester
Cary Code# 30B1TT - 0 to 100 Ft/Lb. Torque Wrench Tester
Cary Code# 30BTTA -3/8" to 1/2" Torque Tester Adapter

Please note Part#30BTTA Adapter is needed for the #30B5TT & #30B1TT

Cary Code# 26W169

W-169 Universal Drum Opener
Cary Code# 26W169

For use with most 3/4" (20mm) and 2" (50mm) closures.

- Used for opening drums safely and easily
-Lightweight, durable aluminum alloy
- Quarter-Turn opening action

Cary Code# 26WSDW

Sparkless (Non-Sparking) Bronze Alloy Drum Plug Wrench
Cary Code# 26WSDW

For use with most 3/4" (20mm) and 2" (50mm) closures
**Does not fit 3/4" plastic Rieke ViseGrip II Plugs

- Stronger than aluminum
- Non-Sparking
- Offset handle reduces user stress

Cary Code# 26WTPW
Cary Code# 26WTPS (Sparkless)

TRI-SURE® Combination Drum Plug Wrench for Round-Head Style Drum Plugs
Cary Code# 26WTPW
Cary Code# 26WTPS (Sparkless)

For use with Tri-Sure (Round-Head) 3/4", 1-1/2" and 2" metal drum closures.

Designed with wrench heads to engage all sizes of Tri-Sure metal plugs. It enables the plug to be tightened or removed by the application of normal manual force.

Cary Code# 26WTAW

TRI-SURE® Drum Plug Wrench for Plastic Plugs
Cary Code# 26WTAW

For use with 2" & 3/4" plastic drum closures.

An extremely light wrench made of aluminum. Its head is designed for engagement with all sizes of plastic plugs.

Part# 26WTPU

Tri-Sure® Plug Wrench with Tab-Seal® Capseal remover

Cary Code# 26WTPU

Tri-Sure's #832490073 plug wrench and Tab-Seal (Round-Head) capseal removal tool allows for safe removal of Tri-Sure capseals as well as easy opening of Tri-Sure drum plugs.

Cary Code# 26WM66

M-66 Flexspout Removal Tool
Cary Code# 26WM66

For standard RIEKE® FLEXSPOUT® closures, FS-41, PFA-22 and PFA-32 closures.

This removal tool, when used properly, can prevent distortion of an opening. It provides for quick and safe removal.

Cary Code# 26WM10

M-1088 Visegrip II Capseal Removal Tool
Cary Code# 26WM10

For removal of RIEKE® VISEGRIP II Steel Capseals only.

This removal tool, when used properly, can prevent distortion of an opening. It provides for quick and safe removal.

Cary Code# 26WURT

UNI-GRIP® Removal Tool
Cary Code# 26WURT

For removing TRI-SURE ® UNI-GRIP® closures.

Cary Code#
Cary Code# 34WSCT (Use w/ 70mm Caps)
Cary Code# 56W63W - Plastic (Use w/ 63mm Caps)
Cary Code# 56W61W (Use w/ 61mm Caps)
Cary Code# 56W51W (Use w/ 51mm Caps)

Screw Cap Tightening Wrench

Cary Code# 34WSCT - Rieke W397 Tightening Wrench
-For applying 70mm screw caps (FS60, FS-70, FS-80, FS-80T)

Cary Code# 56W63W - Rieke W-400-2 Plastic Tightening Wrench
- For Applying 63mm Screw Caps

Cary Code# 56W61W - 61mm Tightening Wrench
- For Applying 61mm Screw Caps

Cary Code# 56W51W - 51mm Tightening Wrench
- For Applying 51mm Screw Caps

Cary Code# 57W399

70mm Torque Wrench Closing Tool
Cary Code# 57W399 - W399-PT01 70mm Torque wrench with a 10ft lb setting for FS-60, FS-70 & FS-80 screw caps

---

Also Available:
Cary Code# 34W394 - Wrench Head for 1/2" Drive for closing 70mm industrial screw caps (socket wrench sold separately)

Cary Code# 57W70W

70mm Wrench Head w/ Handle
Code# 57W70W - 70mm Wrench Head w/ Handle

Designed to work with 3/8” drive torque wrenches.

Cary Code# 30WATE

3/8" Drive Adjustable Torque Wrench
Code# 30WATE - For use with all 3/4" and 2" sockets for Round-Head and Hex-Head Plug. Torque Range 5 - 80 ft.-lb. Comes with a 3/8" drive.

Cary Code# 30WATW

Premium Adjustable Torque Wrench
Code# 30WATW - For use with 70mm Wrench Head. Torque Range 5 - 45 ft.-lb. Comes with a 3/8" drive.

**Sockets Sold Separately**

Steel Screw Cap Tightening Tool
Cary Code # 26WSCT
Size: 2-1/8" Torque Wrench
Cary Code # 26W21T
Size: 2-1/8"Preset Torque Wrench

Cary Code# 26BHCM (25mm-40mm)

Hand Held Chuck Capper
$975.00 each

Cary Code# 26HCM - Hand Held Pneumatic Capper
- Includes overhead balancer
- Pneumatic hand held tightener with adjustable clutches and auto stop
- Chuck inserts available

**PLEASE NOTE SAMPLE CAPS MAY BE REQUIRED FOR TESTING TO ASSURE TOOL WORKS WITH THE CAPS BEING USED**

Cary Code# 56BMPC

Manual Plastic Pail Closer
w/ Carbon Steel Pressure Plate

Cary Code# 56BMPC

Closes one, three and five gallon standard plastic pails. If you are closing the UN gauge plastic, we recommend the Semi-Automatic Plastic Pail Closer.

Weight = 165 lbs
Dimensions = 26" x 17" x 43"

Cary Code# 26WLUP

Lid Press Manual Lug Closing Tool

Closes 5 gallon Steel pails.

Cary Code# 26WLUP
4-Lug Steel Pail Closer
Weight = 5 lbs.

Cary Code# 26WLUG (STEEL)
Cary Code# 26WLUL (ALMAG)

Manual Lug Closing Tool

Cary Code# 26WLUG (STEEL)
20, 22, 24 Gauge 11-1/4" Dia, 16 Lug - 5 gallon Steel Pail Closer
Weight = 33 lbs
Dimensions = 16" x 16" x 28"

Cary Code# 26WLUL (ALMAG)
26/28 Gauge 11-1/4" Dia, 16 Lug - 5 gallon Steel Pail Closer
Weight = 23 lbs
Dimensions = 16" x 16" x 28"

Also available in sizes from 6-1/2 inches, a one gallon pail to 13-15/16 inches, a 120 lb. drum.

Cary Code# 26BSSC (STEEL)
Cary Code# 26BBSC (ALMAG)

Air Pressure = 80 psi to 100 psi

Boom Type Steel Pail Closing Tool

This air operated tool can be hand held, mounted on a boom or overhead crane. Ideal for closing pails on skids or open floor area.

Cary Code# 26BSSC (STEEL)
20, 22, 24 Gauge 11-1/4" Dia, 16 Lug - Steel Pail Closer
Weight = 104 lbs
Dimensions = 28" x 19" x 17"

Cary Code# 26BBSC (ALMAG)
26/28 Gauge 11-1/4" Dia, 16 Lug - Steel Pail Closer
Weight = 79 lbs
Dimensions = 28" x 19" x 17"

Other Sizes Available: 8-1/2 inches (two gallon) to 13-15/16 inches 120 lb. drum.

Cary Code# 26BSPC (20-24 Gauge Steel Pails)
Cary Code# 26BAPC (26-28 Gauge Steel Pails)
Cary Code# 56BPPC (UN & Non-UN Plastic Pails)

Heads may be interchanged to close Steel Lug Covers or Snap On Plastic Covers.

Semi-Automatic Closing Tools

Air-operated with a two-hand control unit which lowers the head to close the cover on the pail. Either tool can be adapted to various pail sizes.

Heads may be interchanged to close Steel Lug Covers or Snap On Plastic Covers.

Cary Code# 26BSPC
20, 22, 24 Gauge 11-1/4" Dia, 16 Lug - Steel Pail Closer
Weight = 410 lbs
Dimensions = 41" x 20" x 69"

Cary Code# 26BAPC
26/28 Gauge 11-1/4" Dia, 16 Lug - Steel Pail Closer
Weight = 410 lbs
Dimensions = 41" x 20" x 69"

Cary Code# 56BPPC
1 to 5 gallon UN & Non-UN Plastic Pail Closer
Weight = 300 lbs
Dimensions = 41" x 20" x 45"

Cary Code# 30WPCC

Paint Can Closer

- Closes **1/2 pint to 1 gallon cans
- Simple and easy to use
- Heavy Gauge Steel Construction

Cary Code# 30WPCC

$250.00 Each

**This tool does not close BWAY "Tall" 1/2 pint cans & certain 1/2 gallon cans.

The Bucket Buster
Opens 5 gallon Standard and most UN Rated Plastic Pails

Cary Code# 56WBUS
1/$25.00 each
3/$20.00 each
6/$18.50 each

This aluminum Lid Remover cuts, opens & re-seals Non-UN plastic pails of all sizes.

Cary Code# 56WOFF
1/$35.00 each
2/$25.00 each
3/$23.65 each
6/$21.50 each
12/$16.75 each
50/$12.00 each
**Please note this tool is not designed to open UN Rated Pails! Improper use of this tool will lead to the tooth of the tool to break. The knife portion of the tool is designed to cut slits on Tear Strip Lids only. Refunds will not be given if this particular tool is broke during use.

Plastic 5 Gallon Lid Opener
(aka Lid-Off)

Cary Code# 56WOFG
1/$6.25 each
6/$5.00 each
12/$4.30 each
50/$3.15 each

Tote, Pail & Drum Heaters

330 gallon Tote Heaters
275 Gallon Tote Heaters
55 Gallon Drum Heaters
30 gallon Drum Heaters
15 gallon Drum Heaters
5 Gallon Pail Heaters

Portable Drum Scales

Cary Code# 26B1MS -1000 lb Capacity, Mild Steel
Cary Code# 26B2MS - 2000 lb Capacity, Mild Steel
Cary Code# 26B1ST - 1000 lb Capacity, Stainless Steel
Cary Code# 26B2ST - 2000 lb Capacity, Stainless Steel

Packmaster Manual Compactor

The PACK-MASTER® manual compactor is designed for use with 55 gallon open head drums. The PACK-MASTER® increases recycling revenues, and reduces your disposal and storage costs. This unique machine will pay for itself in just a few weeks of use. The PACK-MASTER® compactor will make quick work of your disposable clothing, paper, filters, aluminum cans, absorbent, etc.

Cary Code# 26BPAC

$796.00 each

This product ships FOB Aurora, CO 8001

Cary Code# 26BIS6 (10mm-53mm Caps)
Cary Code# 26BIS8 (28mm-70mm Caps)

Hand Held Heat Induction Sealer
$1728.00 each

Cary Code# 26BIS6 -w/ 60mm Diameter Head
- capable of sealing most 10mm-53mm closures
Cary Code# 26BIS8 -w/ 80mm Diameter Head
- capable of sealing most 28mm-70mm closures

**PLEASE NOTE SAMPLE CAPS WILL BE REQUIRED FOR TESTING TO ASSURE TOOL WORKS WITH THE CAPS BEING USED**

Bottle Filling Machine

Cary Code# 26BTTF -Single Head Tabletop Pump Filling Machine
$6,994.00 ea
FOB La Porte, IN 46350

#21BUVL - Lantern Only
$300.00 each

#21WCWL

#21WWAN