SCP-6500 Pumps allow class 1 and 2 flammable liquids to be pumped using GoatThroat™ Pumps’ unique technology and meets NFPA 30 standards.
Alcohols, flammable solvents, volatile hydrocarbons.
The latest pumping solution for spill-free, environmentally safe transfer of flammable liquids, the SCP-6500 Pumps are available now. Featuring a grounding wire and a bonding wire and made with conductive plastic, the SCP-6500 Pumps allow users of flammable liquids to ground the pumps, making them safe for use with class 1 and 2 flammables. All components of this new pump which come in contact with the fluid are created with conductive plastic, so there is grounding of the liquid, the pump, and, with correct bonding, to the container. Created for most demanding safety programs, these pumps meet NFPA 77 which requires that the path to ground must prevent the accumulation of static electricity in conductive equipment. The SCP-6500 pumps feature the same breakthrough technology which has made GoatThroat™ the most trusted name in transfer pumps.
Made in the USA, GoatThroat™ Pumps are designed to fit containers and drums from 5 to 55-gallons, are available in four models for chemical compatibility, and have a cost-effective life expectancy of 10 to 15 years.
INCLUDES 1 pump, siphon tube set for up to 39 inches, 2-inch pipe thread fitting, 3 gram packet of molykote 111 grease, 6-foot grounding cable with alligator clip and single medium drum seal.
is a tough plastic that has a good chemical resistant. PP is translucent in its natural state but can have a glossy finish when produced with color. Some examples of common products with PP are dairy and medication containers. Polypropylene is suitable for hot fill applications of up to 165°F and is therefore great for autoclaving. It is not recommended for cold or sub-freezing temperatures. The Cary Company has an assortment of polypropylene plastics available for purchase, such as plastic caps and jars, which have a higher tolerance for chemical products.
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility.