Air cooled stand-alone chiller designed for indoor operation. Capacity is 4,000 BTU’s/hr at rated conditions. Set up for ambient temperatures 35 ºF to 100 ºF (for higher or lower ambient conditions please consult factory).
Copeland Condensing Unit. North Slope Chillers has determined this to be the most energy efficient and reliable in this size.
This chiller is equipped with a continuous duty, non-ferrous pump. Set up to deliver 4GPM at 50 PSI. The fluid types are to be water or water / glycol (for other fluids consult factory). Output pressure gauge is standard.
Submersed copper coil continuously formed. This has proven itself to be the most reliable design in the industry. It is less susceptible to freezing and fluid contaminations.
Stainless steel tank with fully welded stainless steel couplers; it will include: drain, sight glass, and manual fill tube. The sight glass is easily visible from the exterior of the chiller.
Standard Chiller Features
Rated at ambient temperatures from 35 ºF to 100 ºF
Hermetically sealed compressor
Continuous duty, non-ferrous pump, 4 GPM at 50 PSI (other pumps available)
Non-ferrous piping system
Submersed copper coil evaporator
Stainless steel tank with fully welded stainless steel couplers (3.5 gallon capacity)
Environmentally acceptable R134a refrigerant
Powder-coated steel cabinet (stainless steel is also available)
Available voltages: 110v or 230/1
Standard 110V cord and plug for electrical connections (or as 230/1 twist plug)
Mounted on casters (feet option available)
Capacity: 4,000 BTU's/hr
Inlet / Outlet Piping: 1/2" NPT
Rated Load Amps: [email protected]
Dimensions: 21" L x 15"W x 28"H
Approximate Weight: 150 lbs
- This series of chillers is totally self-contained and requires only a power connection
- High side filter drier
- Thermostatic expansion valve
- Liquid line sight glass
- High and low side pressure switches
- Full refrigerant charge
- Environmentally friendly R-134A