The 30W1AC is a UN Rated 2 1/2 gallon (10 liter) assembled Cubitainer®. This Cubitainer® combination package arrives with a LDPE insert and corrugated fiberboard overpack assembled and ready for filling. The insert is a blend of linear low (LLDPE) and low density polyethylene (LDPE) FDA approved plastic and includes a 38mm (38-400 neck finish) white polypropylene cap and polypropylene foam liner. The insert is contained in a rigid Semi-White 275lb. double wall corrugated fiberboard overpack Cubitainer® carton with a dust cap. A reversible well design allows the opening to be raised or depressed for pouring and storage. The 30W1AC also has a non-glug design, which assures product flows from the insert in a continuous, uninterrupted stream. Assembled Cubitainer is DOT classified as a "4G Combination Package" capable of shipping Group II or III HAZMAT up to 1.5 Specific Gravity.Cubitainer® Key benefits:
- Volumes from 1 to 20 liters (1 quart to 5.3 gallons)
- 38mm, 63mm, or heat-seal openings
- Natural or amber color
- Molded-in handle
- Pre-applied cap
- Special embossments
- Fluorine treatment for improved chemical resistance
- PVDC coating for oxygen permeation resistance
- Customized decorated cartons
- Standard LLDPE/LDPE blend or clean LDPE resin formulation for medical/diagnostic applications
Low density polyethylene (LDPE)
is squeezable and has a malleable feel. Unlike high density polyethylene, it is more translucent and tends to be less chemically resistant. Due to these factors, LDPE works best with packaging that is more flexible, such as produce bags and eye droppers. A common LDPE we carry is the boston round bottle, a popular choice within the personal care industry that works well for dispensing products. LDPE is not recommended for hot-filled applications but it works well in cold temperatures. Fill temperature should not exceed 120°F.
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility.