Cel-Span® 399 Purge Agent for Blow Molding and Film
Cel-Span® 399 contains several proprietary additives that are essential in the cleansing cycle of high temperatures and lower melting polyolefins. Temperatures above 500° may cause material to smoke.
For pricing or more information contact your sales rep, or email sales@thecarycompany.com
Applications:
Cel Span® 399 can be used directly without any mixing necessary to clean most plastic equipment during color, and resin changes. The unique additives and resin system in Cel Span® 399 make it possible to clean color resins like PVC and most grade resins used in blow molding and extrusion processes.
Physical Properties:
Melt Flow ……………….…….… .7-1 MI
Blend Density ……………....….. 0.955
Pellet Size ………………...……. 1/8” Dia.
Color ……………………...….….. Natural
Toxicity & Safety
No adverse health effects from the use of Cel Span® 399 are known. “The additives in the formulation are "GRAS" approved."
Packaging & Storage
Cel-Span® 399 is packaged in a 55 lb. plastic bag or 1,100 lb. Gaylord boxes. We recommend that this product be kept closed and in a dry location.
Instructions:
These instructions are proposed to be used as guiding principles for the correct manufacture and storage of Phoenix Plastics Cel-Span® 399 purging compound. Because of machine, temperature, resin, and manufacturing variances, these instructions are only meant as a guide for the user. Please contact Phoenix Plastics for more information on this purging compound.
STORAGE OF CEL-SPAN® 399:
o Store in a cool dry location
o Do not open until manufactured to reduce contamination
RESIN COMPATIBILITY:
o Polyethylene, Polypropylene, and PET
TEMPERATURE:
o 204°C to 232°C
PERCENT USAGE:
o 100%
EQUIPMENT:
o No Modifications to equipment needed
SAFETY MEASURES:
o Follow safety measures as you normally would or as illustrated in your company policy
SUGGESTED PROCEDURE:
o Empty barrel of all colored or contaminated material. Clean Hopper and throat area of debris
o Add enough Cel-Span® 399 to fill 3 barrelfuls of the machines capacity. Run machine as normal
o When all Cel-Span® 399 has completely exited the barrel, inspect. If necessary, repeat previous step
o When color or debris no longer exits the barrel, add next resin and run machine as normal |
Also Available:
• Cel-Span 300FG - low-cost, high-temp, drop-in w/glass for Injection Molding
• Cel-Span 313N - For clear and colored PC
• Cel-Span 388 - General Purpose for Injection Molding / Extrusion
• Cel-Span 388FG - General Purpose w/glass for Injection Molding
• Cel-Span 399 - For Blow Molding / Film
• Cel-Span 377 - General Purpose for a variety of applications
This data contains general Information and describes typical properties only. Only persons qualified to determine for themselves the suitability of our products for particular purposes should evaluate its potential uses. No guarantee is made or liability assumed, the application of this data and the products describes herein being at the sole risk of the user. Samples are provided to the requestor on an “AS IS, WHERE IS” evaluation purpose only basis, solely under the use and direction of the requestor, without warranty of any kind (either express or implied), including but not limited to any implied warranties of merchantability and fitness for a specific or general purpose and those arising by statute or by law, or from a cause of dealing or usage of trade. In no event, regardless of cause, shall Phoenix Plastics or The Cary Company be liable for any indirect, special, incidental, punitive or consequential damages of any kind, whether arising under breach of contract, tort (including negligence), strict liability or otherwise, and whether based on this agreement or otherwise, even if advised of the possibility of such damages.
For pricing or more information contact your sales rep, or email sales@thecarycompany.com |
