Alkyd Resins

Alkyd Resins

    Grid List Options

    1-24 of 36

  • Allnex Setyrene® 13-2404 is a vinyl toluene monomer modified oil copolymer resin with very rapid drying characteristics. It is used for formulation of fast drying coatings and sealers for wood and as a base for aerosol coatings. This product is suitable for sanding sealers for wood and hardboard, dry fall maintenance paints, and fast dry caulking compounds.
    View Details
  • Allnex Setal® 21-2658 is a medium linseed oil alkyd designed for use in air dry or force dry wrinkle finishes. This resin contributes to cured film toughness; the type of drier blend selected will determine the wrinkle pattern and film thickness.
    View Details
  • Allnex Setal® 21-2662 is a high solids medium oil alkyd designed for use in a wide variety of high quality high solids air drying finishes. Cured films have exceptionally good toughness and flexibility combined with excellent color and gloss retention.
    View Details
  • Allnex Setal® 11-3466 is a pure long oil soybean alkyd supplied at 70% n.v. in mineral spirits. It has exceptionally high specular gloss and a high order of gloss retention. This product is suitable for marine, deck, porch and trim enamels, as well as industrial primers, bridge paints and architectural coatings. Setal 11-3466 is a pure long oil soybean alkyd supplied at 70% n.v. in mineral spirits. Coatings based upon Setal 11-3466 have exceptionally high specular gloss and gloss retention. These coatings have good color retention and exterior durability. Setal 11-3466 meets the performance and compositional requirements of Federal Specification TT-R-266, Type I, Class A.
    View Details
  • Allnex Setal® 21-3604 is a flexible long-oil linseed alkyd resin designed for use in pigmented earth color stains, fillers and glazes for industrial furniture finishing. This resin also improves the working qualities and adhesion of these type products.
    View Details
  • Allnex Setal® 52-1646 is a fast drying rosin and phenolic-modified alkyd for use in the formulation of primers that have exceptionally good resistance to corrosion and lifting by subsequent topcoats. It dries rapidly, sands quickly, and cures to a hard, tough and solvent resistant film. This product is suitable for fast-dry, non-lifting primers, fast dry drum enamels and other industrial finishes, and for low bake primers and enamels. Setal 52-1646 is a fast drying rosin and phenolic modified alkyd for use in the formulation of primers which have exceptionally good resistance to corrosion and lifting by subsequent topcoats. Setal 52-1646 meets the resin requirement of Federal Paint Specification TT-P-664C for rust inhibiting, lacquer resistant primer. This is a low HAPs version of Setal 12-1646.
    View Details
  • Allnex Setal® 22-1343 is a high solids phenolic modified alkyd for use in the manufacture of corrosion resistant coatings that must comply with VOC levels as low as 3.0 lbs /gal. This resin is a high solids analog of the Setal 12-1646 type conventional solids resin.
    View Details
  • Allnex Setyrene® 13-1807 is a copolymer of styrene and a soya oil alkyd designed for use in fast dry enamels and sealers. It formulates very fast dry gloss and semi-gloss enamels and sealers for metal and wood substrates. This product is suitable for toy enamels, hardware coatings, metal furniture, and metal parts requiring fast dry properties. Setyrene 13-1807 resin solution is a copolymer of styrene and a soya / dehydrated castor oil alkyd designed for fast air-dry with good adhesion, flexibility and durability properties. Fast dry. For glossy enamels and sealers, toys, metal furniture, hardware.
    View Details
  • Allnex Setyrene®13-3504 is an oxidizing oil modified alkyd copolymerized with an acrylic monomer to produce a vehicle for fast air dry or bake finishes having good durability and resistance properties. It also features good adhesion, flexibility, gloss, color and color retention. This product is suitable for machinery, metal furniture, farm implements, and highway equipment. Setyrene 13-3504 resin solution is an oxidizing oil modified alkyd copolymerized with an acrylic monomer to produce a vehicle for fast air dry or bake finishes having good durability and resistance properties. Rapid dry, good adhesion and durability. ACE, MPC, metal furniture.
    View Details
  • Allnex Setyrene® 13-3513 is an oxidizing oil copolymer alkyd modified with an acrylic monomer to produce a vehicle for very fast air dry or low temperature force dry. It also has good adhesion and durability. This product is recommended for aerosol marking enamels, conventional general industrial spray enamels for metal, and toy, tool or touch-up enamels. Setyrene 13-3513 resin solution is an oxidizing oil copolymer alkyd modified with an acrylic monomer to produce a vehicle for very fast air dry or low temperature force dry. Very fast dry speed, good adhesion and durability. Aerosol marking enamels, GM.
    View Details
  • Allnex Setyrene® 13-4437 is a specially formulated silicone modified copolymer alkyd that meets the vehicle requirements of Federal Specification TT-E-409E. It has excellent durability of exterior gloss enamels, is highly resistant to cracking, and has outstanding heat resistance. This product is suggested for maintenance enamels, coatings for power transmission towers, coatings for storage tanks and water towers, and finishes for stadium seats. Setyrene 13-4437 is a specially formulated silicone modified copolymer alkyd that meets the vehicle requirements of Federal Specification TT-E-490E. Extremely tough, abrasion resistant, resistant to cracking due to severe temp changes. Mil spec, MPC.
    View Details
  • Allnex Setyrene® 23-3320 is a low HAPs containing copolymer alkyd. The exterior durability of the Setyrene 23-3320 is improved over that of the Setyrene 23-3317, Setyrene 23-3318 and Setyrene 23-3319 family of products. Setyrene 23-3320 possesses the desirable properties of fast set and dry speed with high gloss, improved UV durability, and good general film performance. This resin will allow formulation of 3.5 / 420 VOC coatings. Improved flexibility may be attained via modification with C.P. Hall’s Paraplex G-31 or other similar plasticizers at the level of 5 to 7% on resin non-volatile. VOC compliant DTM enamels and topcoats. ACE, under-hood parts, GM, aerosol coatings
    View Details
  • Allnex Setyrene® 23-3330 is a premium, HAPs-free, high solids acrylic modified copolymer alkyd possessing good exterior durability and gloss retention. Setyrene 23-3330 is designed for air dry, force dry (surface temperature ~180ºf), and bake finishes. It has the desirable properties of fast drying, high gloss, and early water resistance. Acrylic modified copolymer alkyd. Fast dry. Good early water resistance and exterior durability. ACE, MPC
    View Details
  • Allnex Setyrene® 23-4438 is a high-solids silicone alkyd copolymer resin designed for use in coatings requiring extreme durability. Setyrene 23-4438 contains 30% silicone modification as based upon resin nonvolatile. Such modification greatly enhances exterior durability, gloss retention and resistance to environmental chemicals. This resin will allow formulation of 3.5 # / 420 gm. VOC coatings. Silicone modified copolymer alkyd. Very good exterior durability and chemical resistance. MPC, mil spec.
    View Details
  • Allnex Setal® 41-1390 is a water reducible chainstopped alkyd that is recommended for industrial finishes cured by bake, air-dry or force-dry. It exhibits the desirable properties such as very fast dry, good corrosion resistance and low application viscosity. This product is recommended for general industrial undercoats, primers and enamels possessing good durability, as well as fast drying waterborne industrial primers and topcoats. This resin is recommended for industrial finishes cured by bake, air-dry or force-dry. Setal 41-1390 exhibits the desirable properties of very fast dry, good corrosion resistance and low application viscosity.
    View Details
  • Allnex Setal® 41-1449 exhibits the desirable properties of very fast dry, good corrosion resistance and low application viscosity. Setal 41-1449 has better stability and maintains drying characteristics on aging than Setal 41-1390. This resin is recommended for industrial finishes cured by bake, air-dry or force-dry.
    View Details
  • Allnex Setaqua® 6037 (31-6037) is a co-solvent free, acrylic - medium oil alkyd hybrid dispersion. Setaqua 6037 has excellent dry and block properties with superior gloss and appearance. Alkyd - Dispersion - Fast dry acrylic modified alkyd dispersion. Low VOC. Superior gloss and hydrolytic stability. Excellent block resistance.
    View Details
  • Allnex Setal® 21-2113 is a high solids non-oxidizing medium oil coconut alkyd resin formulated for use in the manufacture of cellulose nitrate lacquers and conversion coatings. This resin is also very suitable for low VOC baking systems with good color retention.
    View Details
  • Allnex Setal® 11-2457 is a pure medium soybean oil alkyd designed for use in high drink air/force dry or bake finishes. It allows the introduction of large amount of reducing solvent for better economics. It is recommended for machinery, implement enamels, industrial maintenance and shop coats, and floor finishes. Setal 11-2457 is a pure medium soybean oil alkyd designed for use in high drink air dry, force dry (160-180ºF surface temperature) or bake finishes. Setal 11-2457 allows the introduction of large amounts of reducing solvent for better economics. Additional chemical resistance and enhanced performance may be obtained by crosslinking with melamine resin.
    View Details
  • Allnex Setal® 11-2824 is a pure medium oil semi-drying alkyd for use as a plasticizing resin in lacquers and enamels. This resin may also be used in baking enamels crosslinked with aminoplast resins. Setal 11-2824 may be even better suited for use as a stain binding vehicle.
    View Details
  • Allnex Setyrene® 13-2424 is an alkyd resin that has been copolymerized with vinyl toluene to produce a very rapid drying product. It has limited compatibility with medium oil alkyds, but may be blended up to 20% of the vehicle solids to significantly diminish drying rates. Fast dry industrial coatings, floor sealers, dry fall maintenance coatings, aerosol paints.
    View Details
  • Allnex (formally Nuplex) Setyrene® 23-2434 is a high solids vinyl toluene modified copolymer alkyd possessing very fast set and dry speed with high specular gloss and good general film performance. This resin will allow formulation of 3.5 lb. / 420 gm. VOC coatings and lower. Vinyl toluene alkyd copolymer. Fast dry, high gloss and good hardness. Aerosol coatings, GM.
    View Details
  • Allnex Setal® 11-1111 is a short oil coconut alkyd for use in non-lifting cellulose nitrate lacquers, conversion varnishes and banking enamels. It is an excellent choice for lacquers, enamels and acid cure varnishes. This product is recommended for use where initial color/color retention are of prime importance. Setal 11-1111 is a short oil coconut alkyd designed for use in non-lifting cellulose nitrate lacquers, conversion varnishes and baking enamels. Setal 11-1112 is the same resin supplied in toluene / xylene.
    View Details
  • Allnex Setal® 11-1112 is a short oil coconut alkyd designed for use in non-lifting cellulose nitrate lacquers, conversion varnishes and baking enamels. It is pale in color, hardens quickly, and contributes to good flow and film clarity. This product should be used for lacquers, enamels and acid cure varnishes, especially when initial color and color retention are of prime importance. It is also good for lacquers or conversion varnishes requiring fast set times. Setal 11-1112 is a short oil coconut alkyd designed for use in non-lifting cellulose nitrate lacquers, conversion varnishes and baking enamels. Setal 11-1111 is the same resin supplied in technical xylene.
    View Details
  • Grid List Options

    1-24 of 36

For samples, technical data sheets (TDS), safety data sheets (SDS) or general questions, please contact a specialty chemical representative.
Request a Quote Request a Sample
Call Us: 630.629.6600
Alkyd Resins

The Cary Company is an authorized distributor of Allnex (Nuplex) Resins.

For samples, technical data sheets (TDS), safety data sheets (SDS) or general questions, please contact a specialty chemical representative.

Request a Quote Request a Sample
Call Us: 630.629.6600