70 gauge, 20" x 1000' clear extended core hand stretch wrap film for hand held dispensers. Extended Core acts as a built in handle so each roll is ready to use right out of the box. 70 Gauge for loads up to 2,000 lbs.Key Benefits:
Recommended Pallet Weights/ Performance Ratings
- Easy to hold 1-1/2" diameter by 4-1/2" length extended core.
- More economical and faster to use than strapping or tape.
- Film will not leave a residue on products.
- Available in case quantities.
Cast vs. Blown - What is the difference?Cast Stretch Wrap Film
|60 Gauge (60 Mil)||1,300-1,600 lbs.|
|70 Gauge (70 Mil)||1,600-2,000 lbs.|
|75 Gauge (75 Mil)||1,900-2,250 lbs.|
|80 Gauge (80 Mil) *most popular||2,200-2,500 lbs.|
|90 Gauge (90 Mil)||2,400-3,000 lbs.|
|100 Gauge (100 Mil)||2,800-3,400 lbs.|
|120 Gauge (120 Mil)||3,400-4,000 lbs.|
|Note: Pallet weights are approximates|
Blown Stretch Wrap Film
- Generally less expensive than blown stretch film.
- Perfectly clear, makes reading and scanning in warehouse light easy.
- Very quiet when unwound from the stretch roll.
- Offers two sided cling that allows the wrap to stay securely wrapped.
- Disadvantage - Two sided cling causes pallets that are touching to stick together, making it difficult to unload trucks or containers and causing the film to tear on pallets that are moving in transit.
- Disadvantage - Does not offer the load/holding power blown stretch film offers.
- Disadvantage - Less memory and tear resistance than blown stretch film.
- Offers higher load and stretch capacity.
- A higher degree of memory once stretched allowing loads to stay better secured.
- A higher tear resistance is an advantage when securing loads with sharp edges.
- One sided cling, great for higher load retention, pallets don't stick together.
- Disadvantage - Higher cost due to manufacturing process.
- Disadvantage - Poor clarity can make reading and scanning harder,
- Disadvantage - Noisy when unwound from rolls.
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility.