3-Drum Low-Profile Ultra-Spill Pallet P3 Plus (With Drain) - UltraTech 9627

The UltraTech 9627 is a low-profile polyethylene sump with deck surface (Ultra-Spill Pallet P3 Plus) with a drain designed to store and provide containment for up to three 55-gallon drums. In the event of a container failure, liquids would be captured in the sump, helping prevent contamination to the surrounding environment. The low 8-3/4" profile positions drum funnels below eye level - significantly reduces the potential for hazardous fluids to splash into the eyes or face and is nearly 50% lower than standard spill pallets making drum handling safer and less strenuous. The Ultra-Spill Pallet P3 Plus helps you comply with containment regulations while storing steel and poly drums. Capture leaks, drips and spills to keep floors dry and workers safe. Drain plug lets you conveniently empty sump without removing drums or grating.

Key benefits:

• 4,500 lb. weight capacity -- strong enough to support 3 fully loaded 55-gallon plastic drums of liquid
• Low 8 3/4" profile positions drum funnels below eye level - significantly reduces the potential for hazardous fluids to splash into the eyes or face
• Nearly 50% lower than standard spill pallets, drum handling is safer and less strenuous
• Low-density polyethylene (LDPE) construction resists UV rays, rust, corrosion and most chemicals for long, trouble-free life
• Large sump capacities meet SPCC and EPA Container Storage Regulation 40 CFR 264.175 Spill Containment Regulations
• Removable textured grating enhances traction to minimize costly slips and to help prevent drums from sliding; lifts out to provide unrestricted sump access for hassle-free cleaning
• 2-way forklift pockets -- makes pallet easy to move, even fully loaded
• Linear design fits perfectly along walls and allows easy access to each drum
• Drain plug lets you conveniently empty sump without removing drums or grating
• Sump Composition: Linear, low-density polyethylene with UV inhibitors
• Grate Composition: Injection-molded polyethylene foam
• Dimensions (Grate): 72" L x 24" W
• Style: Heavy-duty

40 CFR 264.175 - Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater."

40 CFR 122.26 When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into waterways.