This white plastic cap has a smooth top containing a continuous thread and a three-ply co-extruded polyethylene foam liner (F217 style). This closure is made of polypropylene (PP) plastic and fits our 120-400 bottles and jars. It has a glossy, smooth top as well as side to give a sleek appearance. The 3-ply foam liner is compatible with many household, cosmetic, liquor, food, water-based products, and is great for general lining applications.
This 4.5 fl. oz. Natural Round Scoop with 2.2" Handle was designed for scooping various powders such as baby formulas, nutritional powders and household chemicals. The scoop provides accurate measurements and features a 2.2" handle for easy grip and control. T
This 4 fl. oz. Natural Round Scoop with 1 oz. Graduation Markings was designed for scooping various powders such as baby formulas, nutritional powders and household chemicals. The scoop provides 1 oz. graduation markings for accurate measurements and features
This 4 fl. oz. Natural Round Scoop with 2.2" Handle was designed for scooping various powders such as baby formulas, nutritional powders and household chemicals. The scoop provides accurate measurements and features a 2.2" handle for easy grip and control. FDA
The 67W33C is a 32 fl. oz. 120 mm 120-400 clarified natural straight sided polypropylene (PP) plastic jar. This plastic jar has a straight profile that can be used across industries. It can be used to pack food products, and is also appropriate for packaging c
The 67WP32 is a 32 fl. oz. 120 mm 120-400 clear straight sided polystyrene (PS) plastic jar. This plastic jar has a straight profile that can be used across industries. It can be used to pack food products, and is also appropriate for packaging creams and body
The 67W33W is a 32 fl. oz. 120 mm 120-400 white straight sided polypropylene (PP) plastic jar. This plastic jar has a straight profile that can be used across industries. It can be used to pack food products, and is also appropriate for packaging creams and bo
The 68WS12 is a 200 x 25 (mm) clear vertical double perforated shrink band for 120mm (120-400 neck finish) standard caps. Shrink bands are a cost-effective way to provide tamper-evident protection to packaged goods. Heat shrink bands are manually applied over
The 67W33B is a 32 fl. oz. 120 mm 120-400 black straight sided polypropylene (PP) plastic jar. This plastic jar has a straight profile that can be used across industries. It can be used to pack food products, and is also appropriate for packaging creams and bo
This white 128 fl. oz. plastic jar is made of impact resistant high density polyethylene (HDPE). With a 120mm (120-400) neck finish, this wide mouth plastic jar has a straight sided, rounded shoulder design that is ideal for storing dry products such as cleans
This black 128 fl. oz. plastic jar is made of impact resistant high density polyethylene (HDPE). With a 120mm (120-400) neck finish, this wide mouth plastic jar has a straight sided, rounded shoulder design that is ideal for storing dry products such as cleans
This 1.8 gallon black wide mouth jar is made of high density polyethylene (HDPE). This container features a straight profile with a slightly rounded shoulder and base. This jar can be used as a condiment and spread container in food packaging, yet is also suit
This 1.8 gallon white wide mouth jar is made of high density polyethylene (HDPE). This container features a straight profile with a slightly rounded shoulder and base. This jar can be used as a condiment and spread container in food packaging, yet is also suit
This white smooth top is a continuous thread plastic cap. It contains a three-ply co-extruded polyethylene foam liner (F217 style). This closure is made of polypropylene (PP) plastic and fits our 120-400 bottles and jars.It has a glossy, smooth top as well as side to give a sleek appearance. The 3-ply foam liner is compatible with many household, cosmetic, liquor, food, water-based products, and is great for general lining applications.
Key benefits
Polypropylene (PP) construction offers good chemical resistance
Smooth sides and top
Fits 120 mm (120-400) neck sizes
Liner is compatible with many substances
Proudly Made in the USA
Cap Liner Type:
SureSeal® 3-Ply Co-extruded Foam Liner Composition The SureSeal® liner is a three-ply co-extruded white liner consisting of a closed cell foam produced from low-density polyethylene (LDPE) faced with solid LDPE on both sides. The opaque white outer skins create a high-quality visual aesthetic. The inner foam core creates a compressible yet resilient product allowing it to create a good seal with the container. Three-ply foam liners have become the industry standard due to their all-purpose compatibility, resiliency, compressible seal, cleanliness (no pulp dust) and economy. Three-ply liners are taste and odor resistant, and have a low moisture transmission rate, meaning they prevent moisture from entering the bottle and affecting products. Good resistance to acids, alkalies, slow solvents, alcohols, oils and aqueous products. Poor resistance to active hydrocarbon
solvents.(This liner does not create an airtight seal.)
Polypropylene (PP) is a tough plastic that has excellent chemical resistance. PP is translucent in its natural state but can have a glossy finish when produced with color. Some examples of common products made with PP are dairy and medication containers. Polypropylene is suitable for hot fill applications of up to 205°F and is therefore great for autoclaving. Distortion occurs between 240° to 270° F. It is not recommended for cold or sub-freezing temperatures. The Cary Company has an assortment of polypropylene plastics available for purchase, such as plastic caps and jars, which have a higher tolerance for chemical products. Discover if Polypropylene is appropriate for hot fill application by learning more about What Is Hot Fill Packaging and how it applies to Polypropylene containers.
Disclaimer:
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. The Cary Company does hereby disclaim any and all warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose or use. We are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us.
Additional Information
More Information
Neck Width
120 mm
Neck Finish
120-400
Cap Liner
SureSeal® SS-200 3-ply Co-extruded Foam Liner
Liner Compatibility
Glass, PE (HDPE, LDPE), PET, PP, PVC, Universal
Color
White
Material
PP
FDA Compliant
Yes
Dimensions
4.855" Dia. x 0.715" H
Case Pack
265 ea.
Pallet Pack
6,625 ea. (25 Cases)
Case Weight
14.84 lbs.
Pallet Weight
371 lbs.
Case Dimensions
24" L x 16" W x 15" H
Pallet Dimensions
40" L x 48" W x 84" H
Industries
Food & Beverage, Health & Beauty, Household Chemicals, Industrial, Pharmaceutical
Country of Manufacture
United States
Q & A
Customer Questions
Can you ship internationally? Where are you located?
The Cary Company online ordering platform is set up to ship within the United States as well as Canada. For other international shipments, please contact us at 630.629.6600 or Orders@thecarycompany.com, and we will be happy to process your order. Our main warehouse and office are located in Addison, Ill. We also have warehouses across the United States that you can see here. Thank you for choosing The Cary Company.
Which styles do continuous threaded caps come in?
CT caps come in smooth top/smooth side, smooth top/ribbed side, matte top/ribbed side, and vented styles.
What’s the benefit of using this continuous threaded cap?
CT caps are widely used across industries due to its sleek look, great grip and easy use when opening and closing. Its wide surface allows for an ideal platform for labeling.
What type of containers are often paired with continuous threaded caps?
Continuous threaded caps can be used with various industries and numerous sized containers anywhere from small glass vials to industrial F-style containers. Compatible containers are listed (though not limited to) under the related items section of the product page.
Did you find what you were looking for?
To request a quote, enter the Part# along with the quantity. To complete the request, fill out the entire form and hit "Submit".