Part # : 68WT2P

24mm Tri-Tab Foil Heat Induction Liner for PET/PVC, Clean Peel, FoilSeal™ S70A FS 3-19

Part # : 68WT2P

24mm Tri-Tab Foil Heat Induction Liner for PET/PVC, Clean Peel, FoilSeal™ S70A FS 3-19

FoilSeal™ S70A FS 3-19 Heat Induction Foil Innerseal, One-Piece, Clean Peel

The 68WT2P is a 24mm one piece foam backed heat induction foil innerseal that will provide an aggressive bond with clean peel removal from PET and PVC containers. Heat induction seal (HIS) liners are a popular choice when an air tight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these are recommended for use with liquid products.
**Heat induction liners are non-returnable.
  • Quantity Qty Price
  • 1000 $0.068 ea.
  • 5000 $0.048 ea.
  • 10000 $0.037 ea.
  • 25000 $0.032 ea.
  • 50000 $0.023 ea.
  • Case Pack: 3,000 ea.
Shipping Estimates can be found on the Cart page once you add products.
Available for purchase in increments of 1000. Minimum purchase quantity is 1000.
  • Quantity Qty Price
  • 1 $0.068 ea.

Availability: In Stock Quantity Available: 24000

Interested in larger quantities?

Request a Quote Request a Sample
Call Us: (630) 629-6600

Specifications
The 68WT2P is a 24mm one piece foam backed universal heat induction foil liner that will provide an aggressive bond with clean peel removal from PET and PVC containers. Heat induction seal (HIS) liners are a popular choice when an air tight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these are recommended for use with liquid products.

Cap Liner Type:

FoilSeal™ S70A FS 3-19 Heat Induction Foil Innerseal Composition
One piece foam backed heat induction foil innerseal that will provide an aggressive bond with clean peel removal from PET and PVC containers.
MaterialStandardMetric
Backing.007".1778mm
Foil.001".0254mm
Heat Seal.0005".0127mm
FoilSeal™ S70A FS 3-19 Heat Induction Foil Innerseal

Disclaimer:

This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility.

Additional Information

More Information
Neck Width 24 mm
Cap Liner FoilSeal™ S70A FS 3-19 (One-Piece Heat Induction Foil Innerseal)
Liner Compatibility PET, PVC
Sealing Characteristics Clean Peel
FDA Approved Yes
Case Pack 3,000 ea.
Country of Manufacture United States
Note: **Heat induction liners are non-returnable.
Q & A
Customer Questions
No Questions
Did you find what you were looking for?
Videos

Videos

You May Also Like