BriskHeat® 250 ml Silicone Rubber Beaker Heater w/SDC (° F) Temperature Controller, K-Type Sensor

19BU00 is a 120v silicone rubber beaker heater and SDC temperature controller with digital Fahrenheit display and K-Type thermocouple designed to provide even heat for 250 ml Griffin beakers and standard beakers. Ideal for laboratory and oil bath applications, the heating element is laminated between 2 layers of silicone rubber for moisture and chemical resistance. SDC benchtop digital controllers are easy to use and programmable with a self-contained, plug-and-play design.

About Silicone Rubber Beaker Heaters
The Cary Company's silicone rubber beaker heaters are ideal for Griffin and standard beaker heating applications. These beaker heaters offer 5.0 watts/in² (.008 watts/mm²) with a dielectric strength of over 2000 volts. The maximum exposure temperature is 450° F (232° C) for reliable, even heat.

The heating element is laminated between two layers of 15 mil fiberglass reinforced silicone rubber for moisture, chemical and radiation resistance. These beaker heaters also have a 1" (25 mm) wide hook and loop fastener to allow for a secure fit to your beaker and easy access to graduation.

About BriskHeat® SDC Benchtop Digital Temperature Controllers
BriskHeat® SDC benchtop digital temperature controllers are affordable and compact controllers for a wide range of general-purpose heating applications. Ideal for applications requiring automatic control, these digital controllers are easy to use and programmable with a self-contained, plug-and-play design.

SDC temperature controllers feature password protection for additional security and a sensor break operation option. These controllers have an audible alarm that can be programmed for high or low range. Models come with either a Fahrenheit or Celsius display. The Fahrenheit models offer a temperature control range from 32° F to 999° F and the Celsius models have a 0° C to 700° C. Accuracy is +/- 1% full span.

Each benchtop digital temperature controller comes with a factory installed sensor input. Thermocouple options include a Type-J or Type-K sensor. These benchtop temperature controllers are ideal for indoor use with an operating temperature range of 32° F to 158° F and a storage range of -4° F to 176° F. Relative humidity should be less than 80% in non-condensing temperatures.

Key benefits

• Fits Griffin & standard beakers
• Removable with easy access to graduation
• Moisture, chemical & radiation resistant
• 2 layers of 15 mil fiberglass reinforced silicone rubber
• Compact size
• On/Off control
• Factory installed J-type or K-type thermocouple sensor
• Upper & lower limits of the setpoint can be adjusted
• 24" (610mm) long power leads with standard 2-prong power plug (NEMA 1-15)