This 275 gallon black high density polyethylene (HDPE) IBC Tote includes a 2" Camlock valve and EPDM gasket. Also known as an intermediate bulk container, IBC tank, or IBC tote, this industrial container holds the same capacity as five 55-gallon drums in less space. This tote has three components: a new HDPE plastic bottle, a new galvanized steel cage, and a new composite (plastic and galvanized steel) pallet. New bottles are made of FDA compliant virgin resin, suitable for food use.
The 26WNDC is a 2" female NPT dust cap. This cap will work with 2" male NPT valve outlet. Dust caps keep valves from accumulating dust and dirt during storage and shipping. The 26WCDC works well as a replacement for worn or damaged valve dust caps.
This 6" top fill port cap has a 2" NPT center plug and can be used for IBC totes. This lid has an EPDM gasket and is designed to fit most plastic IBCs. This port fill screw cap works well as a replacement for worn or damaged IBC lids. This lid is a universal t
The 26WIBF (UltraTech 0651) is a standard burp free drum funnel for 2" bungs. This funnel is made of polyethylene, which has excellent chemical resistance, and also features a built-in vent to prevent splashing or "burping" when pouring liquids into containers
The 26WIFB (UltraTech 0656) is a large burp free IBC tote and drum funnel for 2" bungs. This funnel is made of polyethylene, which has excellent chemical resistance, and also features a built-in vent to prevent splashing or "burping" when pouring liquids into
The Ultra-IBC Hard Top Spill Pallet provides spill containment for IBCs, tanks, and other large containers. The all-polyethylene roll top unit provides both protection from unauthorized access as well as sun, rain, and the elements. Simply place your IBC or ta
This IBC spill pallet has a 365-gallon sump capacity and can handle up to 8,500 lbs. (3,856 kg.) of uniformly distributed loads. Spill pallet is made of tough, chemical-resistant polyethylene that will not rust or corrode, and includes a built-in drain. Low pr
The 56BHS5 is a Yellow IBC Spill Containment Unit made out of high-density polyethylene (HDPE) plastic, with a load capacity of 10,000 lbs. and a spill capacity of 400 gallons.
The 19WHTB is a 275 gallon tote blanket heater with an adjustable thermostat. This 275 gallon tote heater blanket can deliver 1440 watts of heating power. The 19WHTB tote blanket heats to a temperature of 145° F, providing convenient temperature control fo
The 19WTTQ is an insulated tote and drum pallet quilt. Quilts are designed to protect against freeze, heat or condensation damage through insulation and no electricity. The 19WTTQ can be used on a 275 Gallon tote, as well as 4 drums on a pallet, and is great f
Keep heat away with the 19BFW2, a 275 gallon Fluxwrapâ„¢ by North Slope Chillers jacket with insulation used to chill totes. This tote cooling jacket has a multi-channel fluid path that permits maximum cooling liquid flow with low pressure. It provides ful
This 2" NPT dust cap fits compatible IBC tote valves. With a shallow, 1/2" thick profile, this cap is easily attached or removed. This cap also features a polyethylene (PE) foam gasket to ensure a tight seal and prevent leaking. This dust cap is designed to fi
This adapter converts 2" (50mm) male NPT pipe threads to a 2" male camlock. The adapter incorporates female NPT threads on one end and male camlock (also known as a quick disconnect or QD) on the other for connecting pipes and valves with different ends. Made
This green IBC tote valve security seal clip locks onto the IBC valve knob to provide a tamper-evident closure. Made of durable polyethylene (PE), this clip ensures that your IBC tote contents have not been compromised and offers EPA compliant security.
This 6" blue screw top fill port cap is designed for use on most IBC totes. This cap features an ethylene propylene diene monomer (EPDM) gasket that ensures a tight, secure seal and works well as a replacement for worn or damaged IBC lids. Cap includes a 2" bu
This 6" blue top fill port screw cap features two 2" NPT plugs. One hole can be used for venting while the other can be used to fill or empty the IBC tote. This lid can be used as a replacement for worn or damaged IBC port fill caps. Plugs include gaskets.
Suction tube assembly is compatible with 275 gallon IBC tote top fill port caps with buttress plugs. Used to help pump fluid from the IBC tote and discharge through the pump top fill valve outlet, this high-flow 42" (1065mm) long tube is compatible with diesel
This blue IBC tote security seal easily locks onto the IBC valve knob to provide tamper-evident security. This seal ensures that IBC tote contents have not been compromised.
Polypropylene 2" female camlock coupler to 2" male NPT threads. The adapter incorporates female camlock connection on one end and male NPT threads on the other for connecting pipes and valves with different ends. Produced of polypropylene and aluminum steel ar
This 275 gallon black high density polyethylene (HDPE) IBC Tote includes a 2" Camlock valve and EPDM gasket. Also known as an intermediate bulk container, IBC tank, or IBC tote, this industrial container holds the same capacity as five 55-gallon drums in less space. This tote has three components: a new HDPE plastic bottle, a new galvanized steel cage, and a new composite (plastic and galvanized steel) pallet. New bottles are made of FDA compliant virgin resin, suitable for food use.
Key benefits
Made of HDPE
Black
2" Camlock valve
Front and back large metal label plates
New bottle, cage, and composite pallet
Proudly Made in the USA
Material:
High density polyethylene (HDPE ) is the most commonly used resin. This economical plastic has good impact and chemical resistance, is naturally translucent and flexible. It is typically used for personal care products such as shampoo bottles. Adding color will give HDPE an opaque look that will result in an increase in weight and rigidness. We have a variety of these rigid and tough high density polyethylene products in stock, from containers, pails, bottles, caps, tubs and jugs. HDPE works well in below freezing temperatures. HDPE heat compatibility varies. Maximum fill temperature is generally around 171°F; however, testing is recommended with your specific product and application. Distortion occurs between 220° to 250° F.
Disclaimer:
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. The Cary Company does hereby disclaim any and all warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose or use. We are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us.
Can you ship internationally? Where are you located?
The Cary Company online ordering platform is only set up to ship within the United States. For international shipments, please contact us at 630.629.6600 or Sales@thecarycompany.com, and we will be happy to process your order. Our main warehouse and office are located in Addison, Ill. We also have warehouses in across the United States that you can see here. Thank you for choosing The Cary Company.
What comes with a new IBC tote?
A new IBC tote comes with a new tank, new cage, and new pallet.
What are common uses for new IBC totes?
Use new IBC totes for food products, chemicals, and more.
What is the benefit of using a new IBC?
IBC totes are available in 135 gallon, 275 gallon, or 330 gallon capacities. These bulk containers are great for storing products in less space compared to drums.
What are common industries that use new IBC totes?
Common industries that use new IBC totes include food, beverage, manufacturing, and more!
How thick is the wall of the black IBC totes?
Thank you for your inquiry. This IBC tank wall thickness is estimated to be around 1/2" and is made of sturdy HDPE plastic. Thank you for choosing The Cary Company!
Did you find what you were looking for?
Videos
Videos
To request a quote, enter the Part# along with the quantity. To complete the request, fill out the entire form and hit "Submit".