Full Coverage High Heat IBC Tote Heating Jacket with Insulated Lid for 275 Gallon IBCs!
InteliHeat® Thermulate® Intermediate Bulk Container (IBC) Tote heating jacket with insulated lid for 275 gallon IBC totes with a 23°-104°F (-5° -40° C) adjustable thermostat. This IBC tote heater is a cost effective alternative when faster heating times are not required, ideal for gentle warming and to reduce viscosity to avoid winter freezing. It is certified for use in non-hazardous ordinary locations and operates on 120 volts and delivers up to 1,550 watts. The IBC heater has a black nylon fabric outer layer and a high-temperature silicone-coated glass-cloth inner layer, which helps to extend the product's life. It also has a high-grade thermal insulation that helps to make heating more efficient, decreases heat loss, and protects the operator. This heating unit includes an unheated thermal insulated lid with insulated bung flap and 6" non-insulated skirt intended for use with heating jacket jacket. IBC Tote heaters are effective for heating and warming containers to keep the products in storage at suitable or required temperatures.
This 275 gallon IBC Tote includes a 2" NPT valve. Also known as an intermediate bulk container, IBC tank, or IBC tote, this industrial container holds the same capacity as five 55-gallon drums in less space and features a standard 2" NPT (National Pipe Thread)
This 275 gallon IBC features a 2" Camlock valve. Also known as an intermediate bulk container, IBC tank or IBC tote, this industrial container offers the same capacity as five 55-gallon drums in less space and features a 2" quick disconnect valve. The Camlock
The 26WB2C is a rebottled 275 gallon IBC with a 2" Camlock valve. Also known as an intermediate bulk container, IBC tank, or IBC tote, this industrial container holds the same capacity as five 55-gallon drums in less space and features a 2" Camlock valve allow
The 26WB2N is a rebottled 275 gallon IBC with a 2" NPT valve. Also known as an intermediate bulk container or tote, this industrial container holds the same capacity as five 55-gallon drums in less space and features a standard 2" NPT (National Pipe Thread) va
The 26WR2C is a reconditioned 275 gallon IBC with a 2" Camlock valve. Also known as an intermediate bulk container or tote, this industrial container holds the same capacity as five 55-gallon drums in less space and features a 2" Camlock valve allowing for eas
This new Anti-Static 275 gallon IBC tote has a 2" Camlock valve and a Viton gasket. This IBC tote combines a static dissipative polyethylene bottle and is UN marked for regulated products. Gain the greatest possible volume while using a minimum of space with t
InteliHeat® Thermulate® Intermediate Bulk Container (IBC) Tote heating jacket with insulated lid for 275 gallon IBC totes with a 23°-104°F (-5° -40° C) adjustable thermostat. This IBC tote heater is a cost effective alternative when faster heating times are not required, ideal for gentle warming and to reduce viscosity to avoid winter freezing. It is certified for use in non-hazardous ordinary locations and operates on 120 volts and delivers up to 1,550 watts. The IBC heater has a black nylon fabric outer layer and a high-temperature silicone-coated glass-cloth inner layer, which helps to extend the product's life. It also has a high-grade thermal insulation that helps to make heating more efficient, decreases heat loss, and protects the operator. This heating unit includes an unheated thermal insulated lid with insulated bung flap and 6" non-insulated skirt intended for use with heating jacket. IBC Tote heaters are effective for heating and warming containers to keep the products in storage at suitable or required temperatures.
Key benefits:
Fits both 275 Gal totes
Includes insulated lid w/bung flap & 6" skirt for 275 Gal totes
Ambient temperature: -40°F to +104°F (-40°C to +40°C)
Fitted with adjustable retaining straps and quick release buckles.
Flexible - conforms to the container wall providing optimal thermal coupling
Delivers heat over a large surface area, minimizing the possibilities of damaging the product.
Fit and forget, built to last - no regular maintenance required.
Double insulated product that is safe to use 24/7
Comes with a NEMA 1-15P plug and 7 ft. (2m) premium oil, water, and abrasion resistant SOOW power cable
Certified by ETL to UL, CSA Safety Standards
Disclaimer:
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. The Cary Company does hereby disclaim any and all warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose or use. We are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us.
Additional Information
More Information
Capacity
275 gal.
Color
Black
Material
Silicone Cloth
Temperature Reading
Fahrenheit (°F)
Wattage
1550w
Power Plug Type
2-Prong NEMA 1-15
CSA Approved
Yes - CSA Approved
Dimensions
160"-169.5" L x 37.5" H (Jacket) 40" L x 48" W x 6" H (Lid)
Weight
36 lbs.
Country of Manufacture
United Kingdom
Note:
*IBC Tote sold separately.
Q & A
Customer Questions
Can you ship internationally? Where are you located?
The Cary Company online ordering platform is only set up to ship within the United States. For international shipments, please contact us at 630.629.6600 or Sales@thecarycompany.com, and we will be happy to process your order. Our main warehouse and office are located in Addison, Ill. We also have warehouses in across the United States that you can see here. Thank you for choosing The Cary Company.
Is it thermostat operated?
The IBC tote heaters have a thermostat to control the heat.
What is the type of connection to electricity?
These IBC tote heaters plug into a standard outlet.
What are common IBC tote heater applications?
Use IBC tote heaters for viscosity control, freeze protection, temperature maintenance, thermal mixing, melting of solids, and more!
Did you find what you were looking for?
To request a quote, enter the Part# along with the quantity. To complete the request, fill out the entire form and hit "Submit".