The 26W4PV is a 3/4" Tri-Sure HDPE vented plug with EPDM gasket. This closure is for use on steel drums that have a Tri-Sure flange. The 26W4PV can be applied with a Tri-Sure preset torque wrench (Part # 26WTSP).
The 26WTSP is a Preset Torque Wrench for use with Tri-Sure® or Tri-Sure Equivalent (Round-Head) Nylon and Polypropylene drum plugs w/ poly gasket or rubber gasket (Polyirradiated, EPDM, BUNA). These drum bung wrenches are set to automatically apply proper
The 26WTP3 is a 3/4' Tri-Sure Tabseal white plastic cap seal with aluminum ring. This cap seal is tamper evident and offers additional protection from contamination as well as leaks and spills. The 26WTP3 can be applied with a 3/4' plastic Tabseal crimping too
The 26WTP5 is a 3/4' Tri-Sure Tabseal white plastic cap seal with aluminum ring that is printed with a 'seal protected' label. This cap seal is tamper evident and offers additional protection from contamination as well as leaks and spills. The 26WTP5 can be ap
The 26WTS3 is a 3/4' white Tri-Sure Tabseal steel cap seal. This cap seal is tamper evident and offers additional protection from contamination as well as leaks and spills. The 26WTS3 can be applied with a 3/4' manual Round-Head crimping tool (Part # 2
The 26WST3 is a 3/4" Tri-Sure Samba white All-Plastic cap seal. Cap seals provide extra protection from any tampering, contamination, or damage to the product. The 26WST3 can be applied and removed by hand without any tools.
The 26WRP5 is a 3/4" white round head Snapseal-T All-Plastic cap seal. It is designed to fit steel drums that have a round bung. Cap seals provide additional protection from contamination, leaks, and spills.
The 26W4PV is a 3/4" Tri-Sure HDPE vented plug with EPDM gasket. This closure is for use on steel drums that have a Tri-Sure flange. The 26W4PV can be applied with a Tri-Sure preset torque wrench (Part # 26WTSP).
High density polyethylene (HDPE ) is the most commonly used resin. This economical plastic has good impact and chemical resistance, is naturally translucent and flexible. It is typically used for personal care products such as shampoo bottles. Adding color will give HDPE an opaque look that will result in an increase in weight and rigidness. We have a variety of these rigid and tough high density polyethylene products in stock, from containers, pails, bottles, caps, tubs and jugs. HDPE works well in below freezing temperatures. HDPE heat compatibility varies. Maximum fill temperature is generally around 145°F; however, testing is recommended with your specific product and application.
Disclaimer:
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility.
Additional Information
More Information
Neck Width
3/4"
Gasket
EPDM Rubber Gasket
Drum Type
Steel Drums
Thread
ISO-228
Color
Natural
Material
HDPE
Case Pack
1,000 ea.
Pallet Pack
36,000 ea. (36 cases)
Model
PAH308 (Vented)
Q & A
Customer Questions
Do the ventilated drum plugs help prevent expansion of the drums?
Thank you for your inquiry. Ventilated drum plugs prevent non-flammable liquids from leaking during normal sloshing during transport and handling. Drums that contain flammable liquids require venting to relieve pressure build-up due to heat. These plugs can also prevent the creation of a vacuum when liquid is being drained out or the drum is subjected to sudden cooling. Either pressure or vacuum can cause failure of the container. In event of fire, the hazards of drum leakage or explosion due to excessive pressure build-up can be catastrophic. Thank you for choosing The Cary Company.
Can this vented drum plug be used for horizontal (gasoline) barrel position? What other 3/4" vented drum plugs are available for horizontal position drums?
We cannot confirm that this drum plug can safely store gasoline in a drum for extended periods. Over time, this type of drum plug will likely degrade from the corrosive effects of the gasoline. However, we do offer Type I and Type II metal safety cans that are specifically designed to store flammable liquids (like gasoline). These cans provide the proper ventilation for flammables and are made to withstand the corrosive effects of these liquids. Please note our disclaimer, which states that "[w]e are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us." Thank you for choosing The Cary Company.
What is the torque setting for proper sealing of the drum plug?
Thank you for your inquiry. The torque setting for this drum plug is 9 ft. lbs. Thank you for choosing The Cary Company.
Can you ship internationally? Where are you located?
The Cary Company online ordering platform is only set up to ship within the United States. For international shipments, please contact us at 630.629.6600 or Sales@thecarycompany.com, and we will be happy to process your order. Our main warehouse and office are located in Addison, Ill. We also have warehouses in across the United States that you can see here. Thank you for choosing The Cary Company.
Did you find what you were looking for?
To request a quote, enter the Part# along with the quantity. To complete the request, fill out the entire form and hit "Submit".