38mm 38-400 Black Child Resistant Cap (Pictorial), Unlined

38mm F-217® Three-ply Foam Liner

The 68WL38 is a 38mm F-217® liner made of three layers: a thin soft polyethylene foam core sandwiched between two clear layers of LDPE film. F-217 has become the industry standard due to its all purpose compatibility, resilient, compressible seal, cleanliness (no pulp dust) and economy. F-217 liners are taste and odor resistant, and have a low moisture transmission rate, meaning they prevent moisture from entering the bottle and affecting products. F-217 is a brand-name and tends to be used interchangeably with foam liner. However, F-217 actually performs better than a regular foam liner. Like the foam liner, this also does not create an airtight seal.

38mm Foil Heat Induction Liner for Glass/HDPE, Clean Peel, FoilSeal™ .008" C1S FS 7-6S

This (FoilSeal™ .008” C1S FS 7-6S) 38mm one-piece board-backed heat Induction foil innerseal will provide an aggressive bond with clean peel removal from treated glass and PE (HDPE, LDPE) containers. Heat induction seal (HIS) liners are a popular choice when an airtight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure-sensitive liners, these are recommended for use with liquid products.

38mm Foil Heat Induction Liner for HDPE/PP, Clean Peel, FoilSeal™ S70A FS 1-13

The 68W38F is a 38mm one piece foam backed heat induction foil innerseal that provides an aggressive bond with clean peel removal from PE (Polyethylene), LDPE, HDPE and PP (Polypropylene) containers. Heat induction seal (HIS) liners are a popular choice when an air tight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these are recommended for use with liquid products.

38mm Foil Heat Induction Liner for PET/PVC, Clean Peel, 2-Piece, FoilSeal™ .020" Pulp FS 3-19

The 68W39H is a 38mm two-piece foam-backed heat induction foil innerseal that will provide an aggressive bond with clean peel removal from PET and PVC containers. Heat induction seal (HIS) liners are a popular choice when an air tight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these are recommended for use with liquid products.

38mm Foil Heat Induction Liner for PET/PVC, Clean Peel, FoilSeal™ S70A FS 3-19

The 68W38H is a 38mm one piece foam backed heat induction foil innerseal that will provide an aggressive bond with clean peel removal from PET and PVC containers. Heat induction seal (HIS) liners are a popular choice when an air tight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these are recommended for use with liquid products.

38mm Foil Heat Induction HISU7 Liner One-Piece, Clean Peel, Universal

This 38mm one-piece foam-backed universal heat induction foil innerseal will seal to all container materials with varying degrees of adhesion. Heat induction seal (HIS) liners are a popular choice when an air tight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner.

38mm Foil Pressure Sensitive Liner, "Sealed for Freshness" in Black (Uni-Foam™ PS-F1)

The 68W36L is a 38mm polystyrene foam aluminum foil (Uni-Foam™ PS-F1) liner insert with a pressure sensitive and torque activated coating. Pressure sensitive liners create an actual seal, providing an extra level of protection compared to a basic foam liner. They are best for dry products and can at times work with thick liquids such as creams and sauces. Ideal for packaging dry products from spices, food, to medicine. These liners are not recommended for liquids and oils or any wet product. The Uni-Foam™ PS-F1 pressure sensitive foil liner has adhesion to glass and plastic bottles with metal or plastic caps.

This liner is sized to fit industry standard 38mm neck finishes. Due to the variation in neck finish dimensions, particularly with glass bottles, we recommend testing the compatibility of this liner with your bottle/cap combination. To request a sample, please click here.

38mm Lift & Peel Foil Heat Induction Liner for HDPE/PP, Clean Peel, Lift 'n' Peel™ U5 LP-E

The 68W38N is a 38mm one piece heat induction foil innerseal that features an easy to open clean peel design for use on HDPE and PP containers. This foam polyethylene cap liner has a built-in center pull tab for ease of grip when peeling liners off. Heat induction seal (HIS) liners are a popular choice when an airtight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these liners are recommended for use with liquid products.This liner is applicable with products like edible oils, food and beverages, vitamins, shampoos and spices.

3.5 oz. (100 cc) Cobalt Blue PET Plastic Packer Bottle, 38mm 38-400

This 3.5 fl. oz. (100 cc) cobalt blue polyethylene terephthalate (PET) plastic round packer bottle features a 38mm (38-400) neck finish. This packer bottle, also called a pill packer, vitamin bottle or prescription bottle, is commonly used in the pharmaceutical and nutraceutical industries. Ideal for pill and capsule packaging, this container has a round body and wide mouth opening for easy filling and dispensing.

4 oz. (120 cc) White PET Plastic Packer Bottle, 38mm 38-400

The 30WWW2 is a 4 fl. oz. white polyethylene terephthalate (PET) plastic round packer bottle with a 38mm (38-400) neck finish. Packer bottles, also known as pill packers, vitamin bottles and prescription bottles, are commonly used in the pharmaceutical and nutraceutical industries for pill and capsule packaging.

4 oz. (120 cc) Clear PET Plastic Packer Bottle, 38mm 38-400

The 30W4CP is a 4 fl. oz. clear polyethylene terephthalate (PET) plastic round packer bottle with a 38 mm (38-400) neck finish. Packer bottles, also known as pill packers, vitamin bottles and prescription bottles, are commonly used in the pharmaceutical and nutraceutical industries for pill and capsule packaging.

4 oz. (120 cc) Dark Green PET Plastic Packer Bottle, 38mm 38-400

This 4 fl. oz. (120 cc) dark green polyethylene terephthalate (PET) plastic round packer bottle features a 38mm (38-400) neck finish. This packer bottle, also called a pill packer, vitamin bottle or prescription bottle, is commonly used in the pharmaceutical and nutraceutical industries. Ideal for pill and capsule packaging, this container has a round body and wide mouth opening for easy filling and dispensing.

5 oz. (150 cc) Dark Green PET Plastic Packer Bottle, 38mm 38-400

This 5 fl. oz. (150 cc) dark green polyethylene terephthalate (PET) plastic round packer bottle features a 38mm (38-400) neck finish. This packer bottle, also called a pill packer, vitamin bottle or prescription bottle, is commonly used in the pharmaceutical and nutraceutical industries. Ideal for pill and capsule packaging, this container has a round body and wide mouth opening for easy filling and dispensing.

6 oz. (175 cc) White PET Plastic Packer Bottle, 38mm 38-400

This 6 fl. oz. (175 cc) white polyethylene terephthalate (PET) plastic round packer bottle features a 38mm (38-400) neck finish. This packer bottle, also called a pill packer, vitamin bottle or prescription bottle, is commonly used in the pharmaceutical and nutraceutical industries. Ideal for pill and capsule packaging, this container has a round body and wide mouth opening for easy filling and dispensing.

38mm 75 x 30 Clear Perforated Shrink Band for 38mm Child Resistant Cap

The 68WSC5 is a 75 x 30 (mm) clear single vertical perforated shrink band for 38mm (38-400 neck finish) child resistant caps. Shrink bands are a cost-effective way to provide tamper-evident protection to packaged goods. Heat shrink bands are manually applied over and around the cap of a container. Heat is applied using a heat gun or heat tunnel until the band shrinks and closely fits around the container. Perforation allows for easy removal of the seal.