This 24 gauge 5 gallon gray steel tight head pail is UN rated (UN1A1/X1.3/300) for the transportation of hazardous liquid materials. The pail has a Rieke opening and epoxy phenolic lining, ideal for use with alkaline products, fatty acids, detergents, emulsions, foods, general organic chemicals, surfactants, and water based resins. Its carbon steel body is resistant to wear and tear.
The 26WRVV is a Rieke Flexspout® with a BUNA vented spout. The cap has a retractable directional pour spout that allows a smoother pour and minimizes mess. When closed, containers can be stacked due to the low profile of the cap. The 26WRVV can be used wit
The 26WRIE is a Rieke Flexspout that features a tamper-evident cap and a 40mm pour orifice, which offers a wider, easier, and faster pour. It has 10 anti-glug fins that allows the pour to be smoother and the lifting bails on the solid grey overcap allow it be
FS-600 Rieke Flexspout® Crimping Tool is designed to manually close capseals on drums with ease. This crimping tool is compatible with Rieke 63mm crimp on FLEXSPOUT® Closures. Product seals on plastic and all gauges of steel and affixes closure to pail
The M-66 Rieke Flexspout® removal tool is specifically designed to remove Rieke Flexspout® closures as well as FS-41, PFA-22 and PFA-32 closures. This removal tool, when used properly, can prevent distortion of an opening. Using the proper removal tool
IA-FS-600 Pneumatic Crimping Tool for Rieke Flexspout® is compatible with FS-10-10 and FS-10-8V FLEXSPOUT® Closures. The crimping tool comes available as a push-down type crimping tool. Pneumatic crimping tools are air-operated and provide secure seali
The 26WOVP is a double wall 5 gallon overpack carton for UN Rated plastic and steel pails. 5 gal corrugated shipper boxes ship flat for cost and space efficiency. 26WOVP features 'This Side Up" Arrows, and has a designated area where to write the proper shippi
This extra heavy-duty pail heater band for 5 gallon steel pails features an adjustable thermostat up to 425° F, (218° C). This unit is designed to provide practical, efficient means of freeze protection, viscosity control, and maintenance of materials
The 19WPHL PBL05 is a Powerblanket Lite 5 Gallon Pail heater for 5 gallon poly or steel drums. This drum heater operates on 120 volts and delivers up to 120 watts of heating power. It has a preset thermostat that has a maximum temperature of up to 145°F /
BriskHeat® 5 gallon full-coverage pail/drum heater for steel pails is designed to wrap around a pail and heat the contents while insulating to keep the heat exactly where it needs to be. Full-Coverage drum heaters combine the convenience of quick heat-up t
This 24 gauge 5 gallon gray steel tight head pail is UN rated (UN1A1/X1.3/300) for the transportation of hazardous liquid materials. The pail has a Rieke opening and epoxy phenolic lining, ideal for use with alkaline products, fatty acids, detergents, emulsions, foods, general organic chemicals, surfactants, and water based resins. Its carbon steel body is resistant to wear and tear.
Key benefits:
Made of heavy-duty carbon steel with a Rieke opening for easy dispensing of product
5 gallon capacity
UN Certification of UN1A1/X1.3/300 for liquids
Non-removable top is ideal for products that require a higher UN rating
Epoxy phenolic lining ideal for strong alkaline & water-based products
Proudly Made in the USA
Pails vs. Buckets
Need assistance with deciding the best pail or bucket for your applications? Our wide range of buckets and pails allow you to choose the right style for your needs. With countless uses, these containers are great due to their versatility. Discover the Differences of Pails and Buckets and the factors to decide when determining the best packaging for your products.
Disclaimer:
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. The Cary Company does hereby disclaim any and all warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose or use. We are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us.
Additional Information
More Information
Capacity
5 gal.
Color
Gray
Material
Steel
Dimensions
11 7/16" Dia. x 13 1/2" H
Weight
4.4 lbs.
Case Dimensions
48" L x 36" W x 90" H
Pallet Pack
84 ea. (1 Cases)
Pallet Weight
369.6 lbs.
Country of Manufacture
United States
Series
S3 Series
Closure
Tight Head (Closed)
Lining
Epoxy Lining
Steel Gauge
24/24/24 (Top/Body/Bottom)
Fittings
Rieke Opening
UN Rating Liquid
UN1A1/X1.3/300
Q & A
Customer Questions
What is a tight head steel pail typically used for?
Tight head pails can be used to store chemicals, solvents, lubricants, adhesives, and more. Available linings include a rust inhibitor enamel (Unlined), Epoxy Phenolic Lining, Gold Phenolic Lining, and Pigmented Phenolic Lining.
Are all your tight head steel pails UN rated?
Yes, all of The Cary Company’s tight head steel pails are UN rated.
What kind of closures are compatible with tight head steel pails?
The kind of closures we offer that are compatible with tight head steel pails are flexspouts, screw caps, or 2" and 3/4" bung closures.
How many cubic feet in a 5 gallon pail?
The simple conversion of measurement of 5 gallons is 0.803 cubic feet. However, this is for the nominal capacity of the pail. The actual (overflow) capacity of a pail can vary from model to model. To calculate the full volume in cubic feet, for cylinder pails, you need to multiply π (3.14) x the pail radius (in feet) x the pail height (in feet). To calculate the volume for square pails, multiply the pail's length x width x height (in feet).
Can you ship internationally? Where are you located?
The Cary Company online ordering platform is only set up to ship within the United States. For international shipments, please contact us at 630.629.6600 or Sales@thecarycompany.com, and we will be happy to process your order. Our main warehouse and office are located in Addison, Ill. We also have warehouses in across the United States that you can see here. Thank you for choosing The Cary Company.
Do you offer labeling services?
Yes, we offer design services, as well as in-mold labeling, screen printing, label printing and application services. You can request a quote from our design team by calling 630.629.6600 or emailing Sales@TheCaryCompany.com. For more information regarding the services we offer, please go to our Design Services page. Thank you for choosing The Cary Company.
Did you find what you were looking for?
To request a quote, enter the Part# along with the quantity. To complete the request, fill out the entire form and hit "Submit".