30WEZP is a 5 gallon continuous flow plastic pail pump that dispenses approximately 6 fl. oz. (180 ml) per stroke. The dip tube is fixed and the anti-drip nozzle prevents spillage or material waste. There is low pressure at the nozzle to ensure even distribution during dispensing, typically 6/8 lbs. subject to liquid rheology. The pump gives a continuous flow and dispenses on the up and the down stroke. This 5 gallon pump has a polypropylene (PP) construction to allow for good general chemical compatibility and suitability with various hazardous materials. This pump should not be used to dispense petroleum products.

It is up to the customer/end user to determine the compatibility of the pump and the product being dispensed. for assistance in determining what pump is right for you please call us at 630-629-6600. Please send a MSDS of product to assure warranty will apply. This pump comes with female 60mm x 6 fittings. For use with additional neck finishes such as 70mm 8TPI & 70mm 6TPI, please see our Complete Set of 7 Adapters for NX Hand Pumps, sold separately.

Key benefits
  • PP construction for good chemical compatibility
  • Approx. 6 fl. oz. per stroke
  • Fixed dip tube
  • Suitable for drums approx. 5 gallon (25 L) in capacity
  • High viscosity liquid dispense option
  • Anti drip nozzle
  • Closed loop dispensing system
  • EPA compliant


Polypropylene PlasticPolypropylene (PP) is a tough plastic that has excellent chemical resistance. PP is translucent in its natural state but can have a glossy finish when produced with color. Some examples of common products made with PP are dairy and medication containers. Polypropylene is suitable for hot fill applications of up to 205°F and is therefore great for autoclaving. It is not recommended for cold or sub-freezing temperatures. The Cary Company has an assortment of polypropylene plastics available for purchase, such as plastic caps and jars, which have a higher tolerance for chemical products. Discover if Polypropylene is appropriate for hot fill application by learning more about What Is Hot Fill Packaging and how it applies to Polypropylene containers.


This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. The Cary Company does hereby disclaim any and all warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose or use. We are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us. Please note, this item is excluded from online promotions.

Additional Information

More Information
GasketViton Gasket
Dimensions7.9" L x 22.98" H
Pallet Pack100 ea.
Flow Rate6 oz.
Neck Width2"
Note:*This pump includes female 60mm x 6 fittings. For use with additional neck finishes such as 70mm 8TPI & 70mm 6TPI, please see our Complete Set of 7 Adapters for NX Hand Pumps, sold separately.
Q & A
Customer Questions
Can you ship internationally? Where are you located?
The Cary Company online ordering platform is only set up to ship within the United States. For international shipments, please contact us at 630.629.6600 or Sales@thecarycompany.com, and we will be happy to process your order. Our main warehouse and office are located in Addison, Ill. We also have warehouses in across the United States that you can see here. Thank you for choosing The Cary Company.
Did you find what you were looking for?

You May Also Like