Specifications
Made of sturdy high-density polyethylene (HDPE) plastic, this red pail lid is designed for P7 Series 5-gallon pails. This durable and lightweight lid features a tear strip that creates a tamper-evident seal when placed on a pail. This lid cannot be removed until the strip is torn off. This pail cover includes a Rieke Flexspout® with a Rieke vent to ease pail filling and emptying tasks, and an EPDM gasket to ensure a tight seal.

Key benefits:

  • For 5-gallon P7 Series pails
  • Includes a Rieke Flexspout® with a Rieke vent plug
  • Tear strip indicates tamper evidence
  • EPDM gasket
  • FDA Compliant for food use
  • Proudly Made in the USA

Material:

High-Density Polyethylene PlasticHigh density polyethylene (HDPE ) is the most commonly used resin. This economical plastic has good impact and chemical resistance, is naturally translucent and flexible. It is typically used for personal care products such as shampoo bottles. Adding color will give HDPE an opaque look that will result in an increase in weight and rigidness. We have a variety of these rigid and tough high density polyethylene products in stock, from containers, pails, bottles, caps, tubs and jugs. HDPE works well in below freezing temperatures. HDPE heat compatibility varies. Maximum fill temperature is generally around 145°F; however, testing is recommended with your specific product and application.

Disclaimer:

This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. The Cary Company does hereby disclaim any and all warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose or use. We are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us.

Additional Information

More Information
Sealing CharacteristicsTamper Indicating
Pail Lid OptionsRieke Flexspout
GasketEPDM Rubber Gasket
Capacity5 gal.
ColorRed
MaterialHDPE
FDA CompliantYes
BPA FreeYes
Dimensions12.43" Dia.
Case Pack60 ea.
Pallet Pack1080 ea. (18 Cases)
Case Weight50.4 lbs.
Pallet Weight907.2 lbs.
Case Dimensions40" L x 48" W x 48" H
Pallet Dimensions40" L x 48" W x 96" H
Country of ManufactureUnited States
SeriesP7 Series
Note:*Compatible with P7 Series Pails Only.
Q & A
Customer Questions
Can this plastic pail lid be used for food products?
If the pail lid is FDA approved, then it can be used to store food products.
Some of your plastic pail lids have a spout. What are the benefits of these spouts?
If your plastic pail contains liquids, these spouts offer many benefits. These spouts allow controlled flow of the pail contents as they’re emptied. Many of these spouts can be fitted with pumps that enable dosed dispensing of the pail contents.
Which plastic pail lids fit which plastic pails?
If you look at the product page for any of our pail lids, the compatible pail(s) for that lid will be listed under the Related Products section of the product page. For UN rating compatibility, match the UN ratings of the pail and lid. For example, match a pail with a UN rating of UN1H2/Y12/S to the matching lid that has the same UN rating (UN1H2/Y12/S).
What does the Pail Series mean?
Our plastic pails and lids are classified as part of a designated Series, which makes pairing this plastic lid with a compatible pail easier. Simply match the size (e.g., 5 gallon) and series (P5 Series) of the pail and lid to find a proper fit. For the UN rating to apply, also match the UN rating of the pail to the lid. For example, match a pail with UN rating of UN1H2/Y12/S to the matching lid with the same UN rating (UN1H2/Y12/S).
What is a tear strip on this plastic pail lid and what does it do?
The tear strip on this pail lid offers a tamper-evident seal. Once the lid is attached to the pail, the lid cannot be removed until the tear strip is torn off. Although the tear strip cannot be reattached, the lid itself can be removed and replaced.
Can you ship internationally? Where are you located?
The Cary Company online ordering platform is only set up to ship within the United States. For international shipments, please contact us at 630.629.6600 or Sales@thecarycompany.com, and we will be happy to process your order. Our main warehouse and office are located in Addison, Ill. We also have warehouses in across the United States that you can see here. Thank you for choosing The Cary Company.
Did you find what you were looking for?

You May Also Like