Part # : 19BTSA
55 Gallon Drum Induction Heater, Hazardous Area for Steel Drums, Thermosafe® Type A
The 19BTSA is a Thermosafe® Type A no contact zone hazardous heater for 55 gallons or smaller steel drums. This induction heater quickly creates uniform heating that melts solids and heats liquids without drum contact. The heater may be placed over a steel container or the container can be placed into the heater. It uses a single coil in the cylinder wall that creates the heat around the container's wall. As a result, the heater is cooler than the heated drum since there are no hot elements.
This item has an additional crate fee of $155.
**Recommended to be used with 19B4BF.
**Recommended to be used with 19B4BF.
- Quantity Qty Price
- 1 $6,300.790 ea. $7,000.880 ea.
Related Products
| Product | Price | Qty | Request |
|---|---|---|---|
 InteliHeat® Safe Area Only Power Controller for 19BTSA & 19BTSB Thermosafe® Heaters The 19B4BF is a safe area only power controller used for the 19BTSA & 19BTSB Thermosafe® heaters. It is known as a low cost option in comparison to many other installations. This controller is suitable for situations in which a drum needs to be |
| | |
 InteliHeat® ProxATEX™ Safe/Hazardous Area Temperature Controller, 25 Amp Safe for use in hazardous locations, the Inteliheat® ProxATEX™ 25A temperature controller is ETL approved to UL and CSA hazardous location standards and ideal for use with heating equipment operating within potentially explosive atmospheres. This con |
| | |
 InteliHeat® ProxATEX™ NFC Card for 19BPX2 This ProxATEX™ Near Field Communication (NFC) is a credit-card sized token pre-programmed with key parameter settings to take the risk out of operators setting critical parameters. Simply hold the card to the front of the controller (sold separately) and |
| | |
 InteliHeat® 55 Gallon Drum Top Cover for 55 Gallon Steel Drum Induction Heaters, Thermosafe® This flexible top cover is designed for use with Thermosafe® steel drum induction heaters and Faratherm® steel drum base heaters. This soft cover fits over the exposed areas of 55-gallon steel drums to increase the maximum drum wall temperature by 122& |
| | |
 InteliHeat® Mobile Lifting System for InteliHeat® Induction Heaters 19BU50 is a mobile lifting system designed to easily move InteliHeat® induction heaters. Lifting frame is crafted of sturdy steel and fitted with a braked winch that can accommodate either one of maker's Type A or two Type B induction heating units. Portab |
| | |
 InteliHeat® Forklift Attachment for InteliHeat® Induction Heaters 19BU51 is a forklift attachment designed to easily lift and move InteliHeat® induction heaters using a forklift. Lifting attachment features a tough steel frame that safely secures induction heater during transfer using simple retaining bars and clips. Ant |
| | |
 InteliHeat® InteliHeat® Faratherm Drum Base Heater, Hazardous Area The InteliHeat® Faratherm® hazardous area induction drum base heater consists of an induction coil, encapsulated in glass reinforced resin with a heating plate located on top. It has been developed using the same technology as the Thermosafe® Induc |
| |
- Specifications
- The 19BTSA is a Thermosafe® Type A no contact zone hazardous heater for 55 gallons or smaller steel drums. This induction heater quickly creates uniform heating that melts solids and heats liquids without drum contact. The heater may be placed over a steel container or the container can be placed into the heater. It uses a single coil in the cylinder wall that creates the heat around the container's wall. As a result, the heater is cooler than the heated drum since there are no hot elements.
Key benefits:- 240 VAC
- Starts at 21A, 2,750 watts and then falls to 18A, 2,250 watts
- Applicable with 55 gallon or smaller steel containers
- Fast and efficient uniform heating
- Can heat drum wall up to 250° F (121° C)
- Mixing and dispensing is allowed during heating process
- No drum contact means the heater is cooler than heated drum
- Maintenance free, easy cleaning, and corrosion proof
- Coil in cylinder wall is made of glass-reinforced resin
- Type A Heater requires single-phase 240V, 50/60Hz AC power, direct-wire. Average rate of temperature rise for typical viscous organic material is 15° C/hour.
- ETL/ATEX/IECEx certified for Hazardous Zones 1 and 2
Disclaimer:
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. The Cary Company does hereby disclaim any and all warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose or use. We are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us.Additional Information
More Information Shipping Please note this products has a $155 crate fee included in the shipping rate at Checkout Note: This item has an additional crate fee of $155.
**Recommended to be used with 19B4BF. - Q & A
- Customer Questions
You May Also Like
- Quantity Qty Price
- 1 4,829.860 ea.