Part # : 19BTSB

55 Gallon Drum Induction Heater, Hazardous Area for Steel Drums, Thermosafe® Type B

Part # : 19BTSB

55 Gallon Drum Induction Heater, Hazardous Area for Steel Drums, Thermosafe® Type B

The 19BTSB is a Thermosafe® Type B no contact zone hazardous heater for 55 gallons or smaller steel drums. This induction heater quickly creates uniform heating that melts solids and heats liquids without drum contact. The heater may be placed over a steel container or the container can be placed into the heater. It uses a single coil in the cylinder wall that creates the heat around the container's wall. As a result, the heater is cooler than the heated drum since there are no hot elements.
This item has an additional crate fee of $125.
  • Quantity Qty Price
  • 1 $3,840.000 ea.
Shipping Estimates can be found on the Cart page once you add products.
  • Quantity Qty Price
  • 1 $3,840.000 ea.

Availability: 3-5 Days

Interested in larger quantities?

Request a Quote
Call Us: (630) 629-6600

Specifications
The 19BTSB is a Thermosafe® Type B no contact zone hazardous heater for 55 gallons or smaller steel drums. This induction heater quickly creates uniform heating that melts solids and heats liquids without drum contact. The heater may be placed over a steel container or the container can be placed into the heater. It uses a single coil in the cylinder wall that creates the heat around the container's wall. As a result, the heater is cooler than the heated drum since there are no hot elements.

Key benefits:
  • 120 VAC
  • Starts at 23A, 1,500 watts and then falls to 22A, 1,400 watts
  • Applicable with 55 gallon or smaller steel containers
  • Fast and efficient uniform heating
  • Can heat drum wall up to 230°F (110°C)
  • Mixing and dispensing is allowed during heating process
  • No drum contact means the heater is cooler than heated drum
  • Maintenance free, easy cleaning, and corrosion proof
  • Can be used in explosive settings
  • Coil in cylinder wall is made of glass-reinforced resin
  • Type B Heater requires single-phase 120V, 50/60Hz AC power, direct-wire. Average rate of temperature rise for typical viscous organic material is 10-12°C/hour.
  • ETL/ATEX/IECEx certified for Hazardous Zones 1 and 2

Downloads:

Product Sheet

Disclaimer:

This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. The Cary Company does hereby disclaim any and all warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose or use. We are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us.

Additional Information

More Information
Note: This item has an additional crate fee of $125.
Q & A
Customer Questions
No Questions
Did you find what you were looking for?

You May Also Like