Specifications
Our 8 gallon steel salvage drums are constructed of high quality carbon steel and meet UN design type requirements. Standard salvage drums feature yellow bodies with yellow or red covers, and a salvage drum label in red. These open head steel salvage drums include an EPDM rubber gasket with a lever lock ring closure. The lever lock ring holds the cover on to the container with a latch (or toggle) that is pulled from one side to the other and applies torque to the two ring ends in a similar fashion to the bolt ring. No torque wrench is required to confirm proper closure.

Key Benefits
  • UN Rated and tested to help ensure safe shipping of hazardous materials
  • Quick-style lever lock rings make it easy to comply with closure regs; no tools required
  • Open-head design and removable lid offer full, convenient access
  • Shippable "as is" so there's no need to switch closure rings
  • High-visibility yellow with red "Salvage Drum" markings clearly identify drum
  • Interior is coated with a corrosion inhibitor; choose optional epoxy-phenolic lining for added resistance
  • Proudly Made in the USA
Epoxy-Phenolic Lining (Optional)
Unlined drums come with a rust inhibitor designed to prevent the drum from rusting prior to being filled. It is not intended to act as a lining. It is normally applied at thin films 0.1-0.2 mils dry. Optionally, you can order the drum with an Epoxy-Phenolic Lining designed to provide outstanding chemical resistance in a pH range of 7.0 - 9.0. The resin ratio has been varied in specific formulations to achieve the desired compromises in flexibility and resistance. Typical products packaged are alkaline products, fatty acids, detergents, emulsions, foods, general organic chemicals, surfactants and water-based resins.

Material:

Carbon steel (CS) is metal alloy that is made of iron and carbon. It is known as a cost-effective alloying material. There are four types of carbon steel that vary in strength level: low carbon steel, medium carbon steel, high carbon steel, and very high carbon steel. Engine parts, car body panels, and select knives are made of carbon steel. The Cary Company also has carbon steel IBC tanks, filter vessels, and drums that work well with many liquids.

Disclaimer:

This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. The Cary Company does hereby disclaim any and all warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose or use. We are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us.

Additional Information

More Information
Capacity8 gal.
ColorYellow
MaterialCarbon Steel
Dimensions14” Dia. x 14.4” H (inside) / 14.3” Dia. x 15.9” H (outside)
Weight14 lbs.
Pallet Pack45 ea.
Country of ManufactureUnited States
ModelHM0802Q
ConditionNew
ClosureCover w/Lever Lock Ring Closure
LiningUnlined
Steel Thickness0.9/0.9/0.9 (Top/Body/Bottom)
Steel Gauge20/20/20 (Top/Body/Bottom)
FittingsNone
GasketEPDM Rubber Gasket
UN Rating SolidUN1A2/X96/S
Q & A
Customer Questions
What is a Salvage drum and what is it used for?

A salvage drum is a specialized open head drum designed to contain a smaller vessel (such as smaller drums and pails) that holds hazardous material which has been damaged, is leaking or has spilled. Offered in both steel and plastic versions, salvage drums come with a cover that has either a bolt ring or lever lock closure. All salvage drums are UN rated, which means they are designed to meet the requirements set by the DOT for safe transport of potentially hazardous materials within the primary container. Salvage drums can also be used to temporarily store hazardous material soiled absorbents for later disposal.

What type of Salvage drum do I need for my hazardous materials?
Each salvage drum is tested and rated to meet or exceed UN performance requirements for either Packing Group III, II or I hazardous materials. Additionally, these containers, as well as their cushioning materials, must be compatible with the hazardous material in the primary container.
Are Salvage drums DOT certified?

Yes, salvage drums are regulated by the DOT as containers to be used once product is in transport. The UN rating required for salvage drums to hold potentially hazardous goods is determined by DOT.

What are the differences between Salvage drums and Overpack drums?
Salvage drums are used to contain damaged, compromised or leaking containers that hold hazardous materials. The damaged container is placed inside of the Salvage drum and sealed. They are UN rated which means they're tested to ensure they can safely transport the type of hazardous material they are designed. Although overpack drums can also be UN rated, they are simply a secondary container for intact packaging or damaged non-hazardous materials that offer additional protection to the primary container.
How many times may I use this Salvage drum?
Salvage drums are designed for a single transport.
What size Salvage drum is needed for a 55-gallon drum?
Since the Salvage drum must be larger than the container it’s holding, 55-gallon drums typically need an 85-gallon Salvage drum to ensure the primary drum will fit in the Salvage drum.
Should a steel salvage drum be used for a steel primary container?
Most users typically use a steel salvage drum for a steel drum or pail.
Can you ship internationally? Where are you located?
The Cary Company online ordering platform is set up to ship within the United States as well as Canada. For other international shipments, please contact us at 630.629.6600 or Orders@thecarycompany.com, and we will be happy to process your order. Our main warehouse and office are located in Addison, Ill. We also have warehouses across the United States that you can see here. Thank you for choosing The Cary Company.
Did you find what you were looking for?
Videos

Videos

You May Also Like