Part # : 26WSV8

85 Gallon Steel Salvage Drum, UN Rated, Unlined, 18GA, Cover w/Bolt Ring Closure

Part # : 26WSV8

85 Gallon Steel Salvage Drum, UN Rated, Unlined, 18GA, Cover w/Bolt Ring Closure

UN Rated 1A2T/Y320/S,UN1A2/X440/S, 1.2/1.2/1.2 mm, 18/18/18 Gauge

Our 85 gallon steel salvage drums are constructed of high-quality carbon steel and meet UN design type requirements. Standard salvage drums feature yellow bodies with yellow or red covers, and a salvage drum label in red. These open head steel salvage drums include an EPDM rubber gasket with a bolt ring closure. A bolt ring is a closure ring that holds the cover on to the body of the container by encompassing the cover and the top of the container in a groove. This ring is then tightened by a bolt that pulls the ends of the rings together. A calibrated torque wrench is used to confirm proper closure.
  • Quantity Qty Price
  • 1 $370.270 ea.
  • 2 $333.190 ea.
  • 6 $298.230 ea.
  • 12 $276.170 ea.
  • Pallet Pack: 6 drums
Shipping Estimates can be found on the Cart page once you add products.
  • Quantity Qty Price
  • 1 $370.270 ea.

Availability: In Stock Quantity Available: 9

Interested in larger quantities?

Request a Quote
Call Us: (630) 629-6600

Specifications
Our 85 gallon steel salvage drums are constructed of high-quality carbon steel and meet UN design type requirements. Standard salvage drums feature yellow bodies with yellow or red covers, and a salvage drum label in red. These open head steel salvage drums include an EPDM rubber gasket with a bolt ring closure. A bolt ring is a closure ring that holds the cover on to the body of the container by encompassing the cover and the top of the container in a groove. This ring is then tightened by a bolt that pulls the ends of the rings together. A calibrated torque wrench is used to confirm proper closure.

Key Benefits
  • UN Rated and tested to help ensure safe shipping of hazardous materials
  • Open-head design and removable lid offer full, convenient access
  • 12-gauge bolt ring closure, EPDM gasket and plated bolt/nut provide tight seal
  • Interior is coated with a corrosion/rust inhibitor; choose optional epoxy-phenolic lining for added resistance
  • Proudly Made in the USA
Epoxy-Phenolic Lining (Optional)
Unlined drums come with a rust inhibitor designed to prevent the drum from rusting prior to being filled. It is not intended to act as a lining. It is normally applied at thin films 0.1-0.2 mils dry. Optionally, you can order the drum with an Epoxy-Phenolic Lining designed to provide outstanding chemical resistance in a pH range of 7.0 - 9.0. The resin ratio has been varied in specific formulations to achieve the desired compromises in flexibility and resistance. Typical products packaged are alkaline products, fatty acids, detergents, emulsions, foods, general organic chemicals, surfactants and water-based resins.

Material:

Carbon steel (CS) is metal alloy that is made of iron and carbon. It is known as a cost-effective alloying material. There are four types of carbon steel that vary in strength level: low carbon steel, medium carbon steel, high carbon steel, and very high carbon steel. Engine parts, car body panels, and select knives are made of carbon steel. The Cary Company also has carbon steel IBC tanks, filter vessels, and drums that work well with many liquids.

Disclaimer:

This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. The Cary Company does hereby disclaim any and all warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose or use. We are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us.

Additional Information

More Information
Capacity 85 gal.
Color Yellow
Material Carbon Steel
Dimensions 26" Dia. x 36.8" H (inside) / 26.6" Dia. x 39" H (outside)
Weight 63 lbs.
Pallet Pack 6 drums
Country of Manufacture United States
Model HM8518
Condition New
Closure Cover w/Bolt Ring Closure
Lining Rust Inhibitor Enamel
Steel Thickness 1.2/1.2/1.2 (Top/Body/Bottom)
Steel Gauge 18/18/18 (Top/Body/Bottom)
Fittings None
Gasket EPDM Rubber Gasket
UN Rating Liquid UN1A2T/Y320/S
UN Rating Solid UN1A2/X440/S
Q & A
Customer Questions
No Questions
Did you find what you were looking for?
Videos

Videos

You May Also Like

View the trust certificate
  • For further information on the nature of the review controls, as well as the possibility of contacting the author of the review please consult our  GCU.
  • No inducements have been provided for these reviews.
  • Reviews are published and kept for a period of five years .
  • Reviews can not be modified: If a customer wishes to modify their review then they can do so by contacting Verified Reviews directly to remove the existing review and publish an amended one .
  • The reasons for deletion of reviews are available here.

5 /5

Based on 1 customer(s) reviews

  • 1
    0
  • 2
    0
  • 3
    0
  • 4
    0
  • 5
    1

Jim W.   published 11/26/2020 following an order made on 11/23/2020

5/5

Thank you

×