67WSC8 is an 89mm preform plastic shrink band for canister containers. Shrink bands are a cost-effective way to provide tamper-evident protection to packaged goods. Heat shrink bands are manually applied over and around the cap of a container. Heat is applied using a heat gun or heat tunnel until the band shrinks and closely fits around the container. This shrink band fits select canisters.
The 30WHG2 is a 11.7 amps at 120V heat gun and has a temperature range from 120° to 1150°. The 30WHG2 has dual fan speed selector with high and low fan speed settings, as well as a temperature control dial for temperature adjustment. Typical uses inclu
The 30WHG1 is a 5/10 amps at 120V heat gun and has a temperature range from 250 to 1000. Typical uses include bending plastics, curing resins, applying shrink bands, and heating temperature sensitive materials.
The 30WHG3 is a 12.5 amps heat gun and has a temperature range from 572°F to 1000°F with high and low temperature settings. It has deflector and reflector nozzles that protect surfaces, such as glass, yet increases the speed of th
This 89mm (89-400 neck finish) white dome cap is made of polypropylene (PP) with a heat induction liner and fits 89-400 bottles. This cap features a plain 0.008" C1S FS 5-9 liner, which has a one piece board backed heat induction foil innerseal that will seal
This 89mm (89-400 neck finish) natural continuous thread plastic cap includes a .035" three-ply co-extruded polyethylene foam liner (F-217 style). This closure is made of polypropylene (PP) plastic and fits 89-400 bottles and jars. This plastic cap features a
This 89mm unlined natural plastic smooth cap is made of polypropylene (PP) plastic and fits 89-400 containers. This cap has a glossy smooth top and sides to give packaging a sleek design. This closure is ideal for packaging cosmetics, lotions and creams.
This 89mm (89-400 neck finish) black dome cap is made of polypropylene (PP) with a heat induction liner and fits 89-400 bottles. This cap features a plain 0.008" C1S FS 5-9 liner, which has a one piece board backed heat induction foil innerseal that will seal
The 67W89R is a 89mm orange canister closure with foam liner. This closure is made of polypropylene and fits our 89mm canisters. The ribbed-sided design allows for ease of use when removing lid. Foam liners are compatible with many substances, and are an econo
The 67B89Y is a 89mm Yellow unlined canister closure. This closure is made of polypropylene and fits our 89mm canisters. The ribbed-sided design allows for ease of use when removing lid.
The 67W14W is a 16 fl. oz. 89mm 89-400 white high-density polyethylene (HDPE) plastic canister. This plastic jar has a straight profile that can be used across industries. It can be used to pack chemical and food products, especially powders.
The 67W19W is a 19 fl. oz. 89mm 89-400 white high-density polyethylene (HDPE) plastic canister. This plastic jar has a straight profile that can be used across industries. It can be used to pack chemical and food products, especially powders.
The 67W23W is a 23 fl. oz. 89mm 89-400 white high-density polyethylene (HDPE) plastic canister. This plastic jar has a straight profile that can be used across industries. It can be used to pack chemical and food products, especially powders.
The 67W25W is a 25 fl. oz. 89mm 89-400 white high-density polyethylene (HDPE) plastic canister. This plastic jar has a straight profile that can be used across industries. It can be used to pack chemical and food products, especially powders.
67WSC8 is an 89mm preform plastic shrink band for canister containers. Shrink bands are a cost-effective way to provide tamper-evident protection to packaged goods. Heat shrink bands are manually applied over and around the cap of a container. Heat is applied using a heat gun or heat tunnel until the band shrinks and closely fits around the container. Preform shrink bands are designed to fit perfectly on your product and can suit a wide variety of containers. This shrink band fits select canisters.
Polyvinyl chloride (PVC or V) has fair chemical resistance and is characterized by its streaky yet naturally clear finish. It has a good oxygen barrier, which makes it suitable for salad oils and vinegar. PVC is not compatible with solvents. General PVC will distort at 170°F and is not suitable for hot filled applications. We stock over hundreds of polyvinyl chloride based products, such as square jugs that can hold industrial solutions and oblong jars, which can store dry products. We also have cylinder bottles that can be used with cleaning solutions and shampoos.
Disclaimer:
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility.
Additional Information
More Information
Color
Clear
Neck Width
89 mm
Perforation
Non Perforated
Material
PVC
Case Dimensions
16" L x 10" W x 10" H
Country of Manufacture
United States
Q & A
Customer Questions
Can you ship internationally? Where are you located?
The Cary Company online ordering platform is only set up to ship within the United States. For international shipments, please contact us at 630.629.6600 or Sales@thecarycompany.com, and we will be happy to process your order. Our main warehouse and office are located in Addison, Ill. We also have warehouses in across the United States that you can see here. Thank you for choosing The Cary Company.
How are preform bands applied?
Preform bands are applied with a heat gun. The Cary Company offers a variety of heat guns to seal your products.
What types of containers use preform bands?
Use preform bands on canisters, which are available in 35mm-220mm.
Did you find what you were looking for?
Videos
Videos
To request a quote, enter the Part# along with the quantity. To complete the request, fill out the entire form and hit "Submit".