This 9 oz. drug oblong bottle is made of amber polyethylene terephthalate (PET) plastic and has a 24-410 neck finish. It is a classic packaging option for medications, vitamins or other products in the pharmaceutical industry but can also be used to store and ship nutraceutical and animal care products. This bottle features a flat body with a large label panel for easy branding.
Caps and closures sold separately. -- Scroll down to view recommended caps.
here.">The 68W26B is a 24mm black ribbed cap with pressure sensitive liner. This closure is made of polypropylene and fits our 24-410 bottles and jars. The ribbed-sided design allows for ease of use when removing the lid. Pressure sensitive liners create an actual se
The 67WF25 is a 24mm black ribbed sided cap with heat induction liner for PET. This closure is made of polypropylene and fits our 24-410 bottles and jars. The ribbed-sided design allows for ease of use when removing the lid. Induction liners are a popular choi
The 68W24B is a 24mm (24-410 neck finish) Black continuous thread plastic cap with a .035" three-ply co-extruded polyethylene foam liner (F217 style). This closure is made of polypropylene (PP) plastic and fits our 13-425 vials, bottles, and jars. This plastic
here.">The 68W25B is a 24mm black smooth cap with pressure sensitive liner. This closure is made of polypropylene and fits our 24-410 bottles and jars. This cap has a glossy smooth top as well as the side. Pressure sensitive liners create an actual seal which provide
67WF26 is a 24mm 24-410 black ribbed sided cap with a heat induction liner. This closure is made of polypropylene and fits our 24-410 bottles and jars. The ribbed-sided design allows for ease of use when removing the lid. Induction liners are a popular choice
67WD13 is a 24mm black polypropylene (PP) disc top cap. Disc top caps are ideal for dispensing health and beauty products like shampoo, conditioner, and lotion as well as industrial liquids. This dispensing cap is made of tough, chemical-resistant polypropylen
30W23B is an unlined black snap top cap with a 24mm (24-410) neck finish. This hinged cap features smooth walls for a sleek profile as well as a 3 mm orifice for controlled dispensing. Snap top caps are ideal closures for body care products, health and beauty
The 30WB25 is a 24mm, 24-410 black mist sprayer pump with 6-7/8" dip tube. This pump includes an over cap and dispenses a fine mist. Mist sprayers are often used for body care products, but also can be appropriate for other applications.
This black lotion pump dispenser features a 7.72" (196mm) dip tube and fits bottles with a 24-410 neck finish. This pump features a locking mechanism to prevent accidental leakage and delivers a precise amount of product with one push. Lotion dispensing pumps
30WP6L is a black lotion pump with a 24mm (24-410) neck finish and 10" dip tube. This hand pump has a pop-up opening style and ribbed cap texture. Each pump yields an output of 2 ml (0.06 fl. oz.). Common applications for this lotion dispensing pump include lo
The 30WB24 is a 24mm, 24-410 black fine mist trigger sprayer. This sprayer is an excellent choice for precise applications that require fine mists rather than stream. Its distinctive curve stands out from most sprayers in the market, adding aesthetic value to
This 9 oz. drug oblong bottle is made of amber polyethylene terephthalate (PET) plastic and has a 24-410 neck finish. It is a classic packaging option for medications, vitamins or other products in the pharmaceutical industry but can also be used to store and ship nutraceutical and animal care products. This bottle features a flat body with a large label panel for easy branding.
Key benefits:
PET plastic has good impact and scratch resistance
Polyethylene Terephthalate (PET or PETE) is a clear material that has good impact strength, excellent chemical resistance and a high scratch resistance level. PET is known for being strong and lightweight. Our clear packer bottles can withstand high impact for short periods of time and can be widely found in the pharmaceutical sector. Polyethylene terephthalate is also commonly used in food and beverage bottles. PET can handle cold temperatures at about -40°F and is not suitable for hot fill applications. Distortion occurs between 140° to 150° F. Discover if there are conditions under which PET is appropriate for hot fill application by learning more about What Is Hot Fill Packaging and how it applies to PET containers.
Disclaimer:
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility.
Additional Information
More Information
Capacity
9 oz.
Color
Amber
Material
PET
Neck Finish
24-410
Neck Width
24 mm
Dimensions
1.504" L x 2.92" W x 5.93" H
Label Panel Dimensions
2.375" W x 4.25" H (front/back panel) Please request die line file from customer service
Case Pack
240 ea.
Case Weight
18 lbs.
Case Dimensions
24" L x 15" W x 24" H
Pallet Pack
3,600 ea. (15 Cases)
Pallet Weight
270 lbs.
Pallet Dimensions
48" L x 40" W x 79" H
Industries
Animal Care, Nutraceuticals, Pharmaceutical
Country of Manufacture
United States
Note:
Caps and closures sold separately. -- Scroll down to view recommended caps.
Q & A
Customer Questions
Do you have caps and other closures available for this 24mm 24-410 container?
Compatible products that will fit a specific container are listed under the Related Products section of the product page. You can also search our website by the container’s neck finish. For example, 24mm 24-410 caps, pumps and sprayers are designed to fit 24mm 24-410 neck finish containers like this one. However, the best way to check compatibility is to order a sample of the cap to match to your container. You can learn more about finding a matching closure for your container in our Guide to Neck Finishes.
Can you ship internationally? Where are you located?
The Cary Company online ordering platform is only set up to ship within the United States. For international shipments, please contact us at 630.629.6600 or Sales@thecarycompany.com, and we will be happy to process your order. Our main warehouse and office are located in Addison, Ill. We also have warehouses in across the United States that you can see here. Thank you for choosing The Cary Company.
Did you find what you were looking for?
To request a quote, enter the Part# along with the quantity. To complete the request, fill out the entire form and hit "Submit".