Part # : 67WDB5
58mm 58-400 Black Plastic Dome Cap, Unlined
This 58mm unlined black plastic dome cap is made of polypropylene (PP) plastic and fits 58-400 containers. This cap has a glossy smooth top with a sloping rounded edge to provide a sleek, modern look. This closure is ideal for packaging cosmetic powders and creams.
- Quantity Qty Price
- 1 $0.246 ea.
- 950 $0.207 ea.
- 1900 $0.182 ea.
- 3800 $0.157 ea.
- 11400 $0.145 ea.
- Case Pack: 950 ea.
- Pallet Pack: 34,200 ea. (36 Cases)
Related Products
| Product | Price | Qty | Request |
|---|---|---|---|
 2 oz. Clear PS/White PP Plastic Jar, Double Wall, Straight Sided, 58mm 58-400 This 2 fl. oz. double wall straight base jar has a 58-400 neck finish. It features a clear polystyrene (PS) plastic outer layer and a white polypropylene (PP) inner layer. PP provides good impact and chemical resistance, allowing a variety of products to be |
| | |
 58mm Foil Heat Induction Liner for PET/PVC, Clean Peel, FoilSeal™ S70A FS 3-19 The 68W58H is a 58mm one piece foam backed heat induction foil innerseal that will provide an aggressive bond with clean peel removal from PET and PVC containers. Heat induction seal (HIS) liners are a popular choice when an air tight seal is needed. The |
| | |
 58mm Single-Tab Foil Heat Induction Liner for Glass/HDPE, Clean Peel, FoilSeal™ S70A FS 7-6S The 68W59T is a 58mm one piece single tab heat induction foil innerseal (foam polyethylene cap liner) that features an easy to open design for use on glass containers. Heat induction seal (HIS) liners are a popular choice when an airtight seal is needed. The |
| | |
 58mm Pressure Sensitive Liner, No Print here.">The 68W57L is a 58mm polystyrene white foam coated (PS-22) liner insert with a pressure sensitive coating. Pressure sensitive liners create an actual seal, providing an extra level of protection compared to a basic foam liner. They are best for dry products |
| | |
 58mm Foil Heat Induction Liner for HDPE/PP, Clean Peel, FoilSeal™ S70A FS 1-13 The 68W58F is a 58mm one piece foam backed heat induction foil innerseal that provides an aggressive bond with clean peel removal from PE (Polyethylene), LDPE, HDPE and PP (Polypropylene) containers. Heat induction seal (HIS) liners are a popular choice when |
| | |
 2 oz. Clear PET Plastic Wide Mouth Jar, 58mm 58-400 The 68WP02 is a 2 fl. oz. clear PET (polyethylene terephthalate) plastic wide mouth jar with a 58mm (58-400) neck size. This Plastic Jar has a straight profile with a slightly rounded shoulder and base. Often used to package ointments and balms, but also |
| | |
 4 oz. Clear PET Plastic Wide Mouth Jar, 58mm 58-400 The 68WP04 is a 4 fl. oz. clear PET (polyethylene terephthalate) plastic wide mouth jar with a 58mm (58-400) neck size. This Plastic Jar has a straight profile with a slightly rounded shoulder and base. Often used to package ointments and balms, but also |
| | |
 4 oz. Clear PS Plastic Jar, Straight Sided, 58mm 58-400 This 4 fl. oz. clear straight sided polystyrene (PS) plastic jar is compatible with 58 mm 58-400 caps and closures. The straight profile jar can be used across many industries including food and personal care products. This container is appropriate for |
| | |
 4 oz. White PP Plastic Jar, Straight Sided, 58mm 58-400 The 67W04W is a 4 fl. oz. 58 mm 58-400 white straight sided polypropylene (PP) plastic jar. This plastic jar has a straight profile that can be used across industries. It can be used to pack food products, and is also appropriate for packaging creams and body |
| | |
 4 oz. Black PP Plastic Jar, Straight Sided, 58mm 58-400 The 67W04B is a 4 fl. oz. 58 mm 58-400 black straight sided polypropylene (PP) plastic jar. This plastic jar has a straight profile that can be used across industries. It can be used to pack food products, and is also appropriate for packaging creams and body |
| |
- Specifications
- This 58mm unlined black plastic dome cap is made of polypropylene (PP) plastic and fits 58-400 containers. This cap has a glossy smooth top with a sloping rounded edge to provide a sleek, modern look. This closure is ideal for packaging cosmetic powders and creams.
Key Benefits:
- Polypropylene (PP) construction offers good chemical resistance
- Smooth domed top gives packaging a sleek, modern look
- Fits 58mm (58-400) neck sizes
Material:
Polypropylene (PP) is a tough plastic that has excellent chemical resistance. PP is translucent in its natural state but can have a glossy finish when produced with color. Some examples of common products made with PP are dairy and medication containers. Polypropylene is suitable for hot fill applications of up to 205°F and is therefore great for autoclaving. Distortion occurs between 240° to 270° F. It is not recommended for cold or sub-freezing temperatures. The Cary Company has an assortment of polypropylene plastics available for purchase, such as plastic caps and jars, which have a higher tolerance for chemical products. Discover if Polypropylene is appropriate for hot fill application by learning more about What Is Hot Fill Packaging and how it applies to Polypropylene containers.Disclaimer:
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility.Please note, this item is excluded from online promotions.
Additional Information
More Information Neck Width 58 mm Neck Finish 58-400 Compatibility Glass, PE (HDPE, LDPE), PET, PP, PVC, Universal Color Black Material PP Dimensions 2.35" Dia. x 0.675" H Case Pack 950 ea. Pallet Pack 34,200 ea. (36 Cases) Case Weight 17.1 lbs. Pallet Weight 615.6 lbs. Case Dimensions 20" L x 14" W x 15" H Pallet Dimensions 40" L x 42" W x 90" H Industries Health & Beauty, Household Chemicals, Nutraceuticals, Pharmaceutical Country of Manufacture United States - Q & A
- Customer Questions
You May Also Like
58mm 58-400 White/Gold Metal Cap with Pulp & Foil Liner
Part #: 30W57M- Quantity Qty Price
- 1 $0.750 ea.
- 500 $0.683 ea.
- 1,250 $0.644 ea.
- 2,500 $0.601 ea.
58mm 58-400 Black Ribbed (Matte Top) Plastic Cap w/PV Liner
Part #: 30W58B- Quantity Qty Price
- 1 $0.316 ea.
- 500 $0.263 ea.
- 1,100 $0.204 ea.
- 2,200 $0.194 ea.
58mm 58-400 Gold/Gold Metal Cap with Plastisol Liner
Part #: 30W59D- Quantity Qty Price
- 1 $0.578 ea.
- 500 $0.534 ea.
- 1,250 $0.457 ea.
- 2,500 $0.417 ea.
- 5,000 $0.385 ea.
58mm 58-400 White/Gold Metal Cap with Plastisol Liner
Part #: 30W59M- Quantity Qty Price
- 1 $0.594 ea.
- 500 $0.534 ea.
- 1,250 $0.457 ea.
- 2,500 $0.417 ea.
58mm 58-400 Aluminum Metal Cap with Pulp & Poly Liner
Part #: 30W59S- Quantity Qty Price
- 1 $0.760 ea.
- 2,400 $0.623 ea.
- 4,800 $0.568 ea.
- Quantity Qty Price
- 1 $0.183 ea.
- 1,650 $0.177 ea.
- 3,300 $0.152 ea.
- 11,000 $0.145 ea.
58mm 58-400 Black Smooth Plastic Cap w/Foam Liner (3-ply)
Part #: 67W4BL- Quantity Qty Price
- 1 $0.334 ea.
- 1,100 $0.295 ea.
- 2,200 $0.270 ea.
- 11,000 $0.232 ea.
- 22,000 $0.212 ea.
58mm 58-400 Black Smooth Plastic Cap, Unlined
Part #: 67W4BP- Quantity Qty Price
- 1 $0.140 ea.
- 1,100 $0.138 ea.
- 3,300 $0.121 ea.
- 11,000 $0.105 ea.
- 22,000 $0.094 ea.
58mm 58-400 White Smooth Plastic Cap w/Foam Liner (3-ply)
Part #: 67W4WL- Quantity Qty Price
- 1 $0.292 ea.
- 1,100 $0.285 ea.
- 3,300 $0.250 ea.
- 11,000 $0.221 ea.
- 22,000 $0.200 ea.
58mm 58-400 White Smooth Plastic Cap, Unlined
Part #: 67W4WP- Quantity Qty Price
- 1 $0.241 ea.
- 1,100 $0.237 ea.
- 3,300 $0.189 ea.
- 11,000 $0.175 ea.
- 22,000 $0.147 ea.
58mm 58-400 White Plastic Dome Cap, Unlined
Part #: 67W58D- Quantity Qty Price
- 1 $0.246 ea.
- 950 $0.207 ea.
- 1,900 $0.182 ea.
- 3,800 $0.157 ea.
- 11,400 $0.145 ea.
- Quantity Qty Price
- 1 $0.283 ea.
- 1,100 $0.276 ea.
- 3,300 $0.260 ea.
- 11,000 $0.239 ea.
58mm 58-400 White Plastic Dome Cap, Pressure Sensitive Liner
Part #: 67W5DP- Quantity Qty Price
- 1 $0.307 ea.
- 950 $0.300 ea.
- 1,900 $0.257 ea.
- 3,800 $0.227 ea.
- 11,400 $0.205 ea.
58mm 58-400 Natural Plastic Dome Cap, Unlined
Part #: 67WDN5- Quantity Qty Price
- 11,400 $0.135 ea.
- 22,800 $0.119 ea.
- 34,200 $0.111 ea.