37BL25 is an emergency cubicle shower with an interior covered ABS plastic eyewash station that provides immediate treatment for the eye, face or body that has been exposed to chemicals or other hazardous products. Submersible pump in cubicle sump prevents overflow by pumping waste water to a drain. Shower/eyewash unit is often used during emergencies or when quick responses to accidents are required. The combination cubicle shower and eyewash helps prevent overspray and is activated by hand upon entry. This freestanding emergency shower is suitable for various types of environments where space is at a premium or the emergency safety shower must be enclosed.

Key benefits:
  • All-in-one system provides chemical exposure treatment for the eye, face and full body
  • Easy to reach flow regulator valve positioned on side of bowl adjusts to suit the severity of the accident
  • Low operating torque has trouble-free on/off operation
  • Shower: 20 gallons water flow/minute, eye/face: 3 gallons water flow/minute
  • Water inlet: 1" NPT
  • Minimum operating pressure: 2 bar g, 29 PSI
  • Electrical supply pump power requirements: 120V single phase, 60Hz (plug end provided)
  • Integral drain sump and strip screens reduce the risk of surplus contaminated water outside of the cubicle area
  • Shower has a stainless steel hollow section frame enclosed in GRP sheeting with stainless steel pipes for corrosion resistance and extended life
  • Piping system with high-performance quarter-turn ball valve (316L stainless steel) that works well in harsh environments
  • Covered ABS eyewash bowl is located on the inside of the cubicle for maximum effectiveness
  • One year limited warranty


This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility.

Additional Information

More Information
Mounting TypeWall Mount
MaterialStainless Steel
Flow Rate3 gpm, 20 gpm
Dimensions41.8" L x 39.2"W x 94.8" H
Weight270 lbs.
Country of ManufactureCanada
Q & A
Customer Questions
What are the power requirements for this emergency cubicle shower?
Thank you for your inquiry. The electrical requirements for this emergency cubicle shower (electrical supply pump) are 120V single phase, 60Hz (with plug end provided).
Does this unit come pre-assembled or is some assembly required?
Thank you for your inquiry. The unit is shipped fully assembled in a semi enclosed wooden crate. The user only needs to connect the provided power cord to a GFCI protected 110V power supply and the water supply. Thank you for choosing The Cary Company.
What head pressure can the sump pump generate on this emergency shower? We are looking for an option that generates the necessary pressure to pump the waste water up 12 feet before making a run to a drain.
Thank you for your inquiry. For the pump directly, the head pressure would be approximately 1500 GPH. However, keep in mind that any elbows, fittings, etc., will reduce the overall head coming out of the pump outlet on the back of the unit. The standard setup used adds a check valve and an elbow, which reduces the overall head coming out of the pump outlet. The pump in the unit operates at 1/4 HP. Thank you for choosing The Cary Company.
How much clearance is needed for incoming water and outgoing waste water against the corner of a concrete masonry wall for this safety shower? Can they be made in right- or left-hand versions?
Thank you for your inquiry. This model comes with the water inlet and pump outlet both in the back of the cubicle shower. Depending on the connections used, you will need between 4 to 8 inches minimum for piping connections. For the sides, there is no need for additional space. In regard to right- or left-handed versions, the shower activation valve is only available positioned on the right side of the eyewash (as shown). Thank you for choosing The Cary Company.
Does this unit come with a complete CSA certification?
Thank you for your inquiry. This unit only has the pump, which is CSA certified. There is no requirement for ANSI certification for this safety shower/eyewash station. Thank you for choosing The Cary Company.
Can you ship internationally? Where are you located?
The Cary Company online ordering platform is only set up to ship within the United States. For international shipments, please contact us at 630.629.6600 or Sales@thecarycompany.com, and we will be happy to process your order. Our main warehouse and office are located in Addison, Ill. We also have warehouses in across the United States that you can see here. Thank you for choosing The Cary Company.
Did you find what you were looking for?

You May Also Like