Build your own berm with this 50' x 2" Make-A-Bermâ„¢ Kit, designed to accommodate your unique custom spill containment needs. Berm Build consists of two 25' L x 2" H straight sections, four 2" H corners, six 8 oz. tubes Sil-Thaneâ„¢, one 8 oz. HH-66 vinyl cement and one roll vinyl collar. This spill containment kit is created to fit your application both indoors and outdoors to avoid transferring existing and difficult-to-move equipment. These kits are meant for small to medium capacity control areas or spaces where a traditional berm shape would not fit. This berm building kit consists of non-absorbent modified PVC coated fabric to resist oils, gasoline, acids, and other liquids. A polyether-based adhesive provides a liquid-proof seal to use as a semi-permanent installation to the floor. Foam is inserted into the berm walls for flexibility, creating a crush-resistant barrier.
This 15' x 2" Make-A-Berm™ straight section component can be used to construct a custom berm system to suit your equipment space. Link straight sections together for longer spans or connect to corner pieces to fully surround an area. Made to provide spi
This 2" Make-A-Berm™ corner component can be used to construct a custom berm system to suit your equipment space. Corner component allow you to join berm components at an angle. Made to provide spill containment around hard-to-move equipment, spill prone
This 2" Make-A-Berm™ vented corner component can be used to construct a custom berm system to suit your equipment space. Vented corner is designed to release air when berm compression occurs to prevent damage. Made to provide spill containment around har
This 2" Make-A-Berm™ vertical corner component can be used to construct a custom berm system to suit your equipment space. Vertical corners are designed to attach flush to wall or other vertical barrier to fully contain an area. Made to provide spill con
Build your own berm with this black 10" x 2" Make-A-Berm™ drain plug. This drain plug allows users to create an easy outflow for rain or melted snow. The plug is made from a PVC coated fabric and comes with a nylon cap. The drain plug can be added to any
Sili-Thane 803 adhesive and sealant is formulated to install Make-A-Berm™ components to area floors and walls. Sold six tubes per box, Sili-Thane 803 is a polyether-based adhesive that provides a liquid-proof seal acting as a semi-permanent installation
This HH-66 vinyl cement is formulated to join Make-A-Berm™ component sections. This fast drying adhesive acts as a bond to connect Make-A-Berm™ sections together. This vinyl cement forms a tight seal that links two sections and attaches berm parts
Build your own berm with this 50' x 2" Make-A-Berm™ Kit, designed to accommodate your unique custom spill containment needs. Berm Build consists of two 25' L x 2" H straight sections, four 2" H corners, six 8 oz. tubes Sil-Thane™ adhesive, one 8 oz. HH-66 vinyl cement and one roll vinyl collar. This spill containment kit is created to fit your application both indoors and outdoors to avoid transferring existing and difficult-to-move equipment. These kits are meant for small to medium capacity control areas or spaces where a traditional berm shape would not fit. This berm building kit consists of non-absorbent modified PVC coated fabric to resist oils, gasoline, acids, and other liquids. A polyether-based adhesive provides a liquid-proof seal to use as a semi-permanent installation to the floor. Foam is inserted into the berm walls for flexibility, creating a crush-resistant barrier.
Key benefits:
Flexible foam walls for light wheeled traffic
Compatible with 2" Make-A-Berm pieces
Easy installation and removal
Ideal for small to medium capacity control areas
-40° F to 180° F
Proudly Made in the USA
Material:
Polyvinyl chloride (PVC or V) has fair chemical resistance and is characterized by its streaky yet naturally clear finish. It has a good oxygen barrier, which makes it suitable for salad oils and vinegar. PVC is not compatible with solvents. General PVC will distort at 170°F and is not suitable for hot filled applications. We stock over hundreds of polyvinyl chloride based products, such as square jugs that can hold industrial solutions and oblong jars, which can store dry products. We also have cylinder bottles that can be used with cleaning solutions and shampoos.
Disclaimer:
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. The Cary Company does hereby disclaim any and all warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose or use. We are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us.
Additional Information
More Information
Color
Yellow
Material
PVC
Max Temp Allowed
180° F (82° C)
Stackable
No
Fork Lift Access
No
Dimensions
600" L x 5.5" W x 2" H
Weight
35 lbs.
Case Dimensions
30" L x 30" W x 12" H
Country of Manufacture
United States
Q & A
Customer Questions
Can you ship internationally? Where are you located?
The Cary Company online ordering platform is only set up to ship within the United States. For international shipments, please contact us at 630.629.6600 or Sales@thecarycompany.com, and we will be happy to process your order. Our main warehouse and office are located in Addison, Ill. We also have warehouses in across the United States that you can see here. Thank you for choosing The Cary Company.
Did you find what you were looking for?
To request a quote, enter the Part# along with the quantity. To complete the request, fill out the entire form and hit "Submit".