This 26BEB7 electric bottle capping machine can handle screw and lug caps ranging from 18-53mm in diameter. It operates on 110 x120v, 50/60 Hz. with a torque range of 10-30 inch lbs. and can be used with bottles that have a maximum height of 15 inches. This machine requires less effort than handheld cappers, yet still provides the repeatable torque accuracy you need to keep your customers and pocketbook happy. Better yet, it comes with a one year warranty for all parts and labor. This capping machine has a direct plug-in cord that runs on electricity, which allows it to be used in various settings, particularly areas with limited space or without compressed air such as offices. The Electronic Bottle Capping Machine is packaged with a Standard Base.
** Chucks & Liners Required and Sold Separately below.
The 26BLAG is a tabletop pneumatic and electric bottle capping machine bottle gripping base. This base is lever activated and prevents spinning for bottles up to 6.5" in diameter. The four continuously adjustable grippers can be set to center and hold any bott
The 26BDC6 is an aluminum deep well chuck for bottle caps with a 15-19mm diameter, used in conjunction with a bottler capper or bottle capping machine. Deep well chucks are the same as standard chucks except they have a secondary cavity that allows them to tig
The 26BUD0 is a urethane chuck liner 55 durometer for 15-19mm Caps that is inserted within a chuck. The chuck with the inserted liner is attached to the capping machine which grips the cap during the capping process.
The 26BAC1 is an aluminum chuck for bottle caps with a 19-24mm diameter, used in conjunction with a bottler capper or bottle capping machine. A bottle capping chuck is a tool that is attached to a capping machine that enables the capping machine to grip a cap.
The 26BUD1 is a urethane chuck liner 55 durometer for 19-24mm Caps that is inserted within a chuck. The chuck with the inserted liner is attached to the capping machine which grips the cap during the capping process.
The 26BAC2 is an aluminum chuck for bottle caps with a 25-32mm diameter, used in conjunction with a bottler capper or bottle capping machine. A bottle capping chuck is a tool that is attached to a capping machine that enables the capping machine to grip a cap.
The 26BUD2 is a urethane chuck liner 55 durometer for 25-32mm Caps that is inserted within a chuck. The chuck with the inserted liner is attached to the capping machine which grips the cap during the capping process.
The 26BAC3 is an aluminum chuck for bottle caps with a 31-37mm diameter, used in conjunction with a bottler capper or bottle capping machine. A bottle capping chuck is a tool that is attached to a capping machine that enables the capping machine to grip a cap.
The 26BUD3 is a urethane chuck liner 55 durometer for 31-37mm Caps that is inserted within a chuck. The chuck with the inserted liner is attached to the capping machine which grips the cap during the capping process.
The 26BAC4 is an aluminum chuck for bottle caps with a 38-46mm diameter, used in conjunction with a bottler capper or bottle capping machine. A bottle capping chuck is a tool that is attached to a capping machine that enables the capping machine to grip a cap.
The 26BUD4 is a urethane chuck liner 55 durometer for 38-46mm Caps that is inserted within a chuck. The chuck with the inserted liner is attached to the capping machine which grips the cap during the capping process.
How Electric Bottle Capping Machines Work Place the cap loosely on the bottle and then put the bottle on the machine's base. Make sure it rests against the backstop. Pull down on the capping lever to lower the capping motor with attached chuck onto the cap for tightening. When the chuck touches the cap, this will start the capping motor. In less than a second, the motor tightens the cap and proceeds to shut off automatically, signaling that the tightening process is complete. Let the spring loaded capping lever lift the capping motor back to starting position. Remove the newly capped bottle from the machine's base.
The Anti-Rotation Base The Anti-Rotation Base has a high friction rubber surface which prevents the bottle from spinning while being capped.
Superior Torque Accuracy The Electric Capping Machine is known for its torque accuracy. It shuts off automatically when the correct amount of torque is applied to the cap.
Key Benefits:
Tightens caps from 18-53mm
Torque range 10-30 inch lbs.
Maximum bottle height of 15"
Runs on standard electricity
Direct plug-in power cord
External torque adjustment dial
Reversible (can be used as a de-capper)
Quick change chuck
Anti-Rotation base prevents the bottle from rotating
1 year warranty for all parts and labor
Package Includes:
Bottle Capping Machine
Standard Base
Disclaimer:
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility.
Additional Information
More Information
Color
Mixed
Pallet Pack
10 ea.
Weight
28.5 lbs.
Torque Range
10 - 30 in. lbs.
Note:
** Chucks & Liners Required and Sold Separately below.
Q & A
Customer Questions
Can you ship internationally? Where are you located?
The Cary Company online ordering platform is only set up to ship within the United States. For international shipments, please contact us at 630.629.6600 or Sales@thecarycompany.com, and we will be happy to process your order. Our main warehouse and office are located in Addison, Ill. We also have warehouses in across the United States that you can see here. Thank you for choosing The Cary Company.
Did you find what you were looking for?
To request a quote, enter the Part# along with the quantity. To complete the request, fill out the entire form and hit "Submit".