This pump does feature a metal spring. We do not recommend using it with sodium hypochlorite.

Buttress is coarse thread ("thick") whereas NPT is fine thread ("thin").

If you are interested in a label that wraps around this jar, please email design@thecarycompany.com for assistance.

The 30W8TE trigger sprayer is not all-plastic. The spring is made of steel. We do offer all-plastic trigger sprayers.

We recommend our Part #26WG55 tight head steel drum for gasoline storage. Please note it is up to the end user to ensure proper grounding when using the #26WG55 drum to store gasoline.

Each 5" x 5" White Oil-Only Absorbent Bilge Boom is 5 inches in diameter (5" W x 5" H) and 5 feet long.

This drum pump has a 23mm outlet and a 25.4 mm inlet.

We recommend our Part #26WG55 tight head steel drum for gasoline storage. Please note it is up to the end user to ensure proper grounding when using the #26WG55 drum to store gasoline.

The size heater will depend on the intended application. As this is a band heater designed to fit around an object, the 1.5" might be too narrow to fit around the object you intend to heat. You can reach our sales team at 630.629.6600 or sales@thecarycompany.com for help choosing a heater.

The label dimensions for this plastic jar are 9.0321" W x 1.098" H (100% wrap). If you have further design or labeling questions please contact design@thecarycompany.com .

This immersion heater is made of Incoloy 840 superalloy.

Yes, this honey bottle is compatible with the #68W36W snap top cap. Caps and bottles with matching neck finishes (in this case, 38-400), are typically compatible. Please note that while a cap may fit a bottle, the application and product being dispensed should also be considered.

Please contact our sales team at 630.629.6600 or sales@thecarycompany.com for replacement parts.

These masks are made in China. Please see the product photos for more information.

Unfortunately, no, this standard ramp will not fit your wrapping machine.

Home
Industrial Filtration
Industrial Liquid Filters
Replacement Filter Cartridges for Liquid Filter Bags
Nominal Depth Pleated Liquid Filter Cartridges

Nominal Depth Pleated Liquid Filter Cartridges

Maximum Dirt Holding Capacity & Efficiency with Two-Layered Pleated Design

Nominal depth cartridge pleated filters offer 5 to 10 times the surface area as a standard filter due to the two-layer pleating design. The two layers include a pre-filter and final filter layer allowing for higher flow applications with a lower initial pressure drop. For a broad range of chemical compatibility, these nominal rated filter cartridges are available in polyester or polypropylene with configurable cap style, cartridge length, micron size, etc. Select a basic nominal depth pleated liquid filter cartridge below and specify your requirements on the product page.

Expert Help - Don’t see what you need? Please contact our friendly filtration specialists by email or call us at 630.629.6600 today!