The 26BPC1 is a handheld pneumatic bottle capper used to tighten screw and lug caps from 10mm to 41mm in diameter. It is an outstanding combination of everything you would want in a handheld capping machine. Simple to operate, quiet, comfortable to use, and provides outstanding repeatable torque accuracy. The torque output is easily adjusted by turning an external torque dial with your fingers. This Pneumatic Bottle Capping Machine runs on compressed air at 90 PSI. (Includes Bottle Capper, Capper Balancer, Coil Air Hose, and Anti-Rotation Mat.) It comes with a one year warranty for all parts and labor. This machine has a switch that allows you to cap a bottle, or remove a cap.
** Chucks & Liners Required and Sold Separately below.
The 26BUD0 is a urethane chuck liner 55 durometer for 15-19mm Caps that is inserted within a chuck. The chuck with the inserted liner is attached to the capping machine which grips the cap during the capping process.
The 26BAC0 is an aluminum chuck for bottle caps with a 15-19mm diameter, used in conjunction with a bottler capper or bottle capping machine. A bottle capping chuck is a tool that is attached to a capping machine that enables the capping machine to grip a cap.
The 26BDC6 is an aluminum deep well chuck for bottle caps with a 15-19mm diameter, used in conjunction with a bottler capper or bottle capping machine. Deep well chucks are the same as standard chucks except they have a secondary cavity that allows them to tig
The 26BUD1 is a urethane chuck liner 55 durometer for 19-24mm Caps that is inserted within a chuck. The chuck with the inserted liner is attached to the capping machine which grips the cap during the capping process.
The 26BAC1 is an aluminum chuck for bottle caps with a 19-24mm diameter, used in conjunction with a bottler capper or bottle capping machine. A bottle capping chuck is a tool that is attached to a capping machine that enables the capping machine to grip a cap.
The 26BDC7 is an aluminum deep well chuck for bottle caps with a 19-24mm diameter, used in conjunction with a bottler capper or bottle capping machine. Deep well chucks are the same as standard chucks except they have a secondary cavity that allows them to tig
The 26BUD2 is a urethane chuck liner 55 durometer for 25-32mm Caps that is inserted within a chuck. The chuck with the inserted liner is attached to the capping machine which grips the cap during the capping process.
The 26BAC2 is an aluminum chuck for bottle caps with a 25-32mm diameter, used in conjunction with a bottler capper or bottle capping machine. A bottle capping chuck is a tool that is attached to a capping machine that enables the capping machine to grip a cap.
The 26BDC8 is an aluminum deep well chuck for bottle caps with a 25-32mm diameter, used in conjunction with a bottler capper or bottle capping machine. Deep well chucks are the same as standard chucks except they have a secondary cavity that allows them to tig
The 26BUD3 is a urethane chuck liner 55 durometer for 31-37mm Caps that is inserted within a chuck. The chuck with the inserted liner is attached to the capping machine which grips the cap during the capping process.
The 26BAC3 is an aluminum chuck for bottle caps with a 31-37mm diameter, used in conjunction with a bottler capper or bottle capping machine. A bottle capping chuck is a tool that is attached to a capping machine that enables the capping machine to grip a cap.
The 26BDC9 is an aluminum deep well chuck for bottle caps with a 31-37mm diameter, used in conjunction with a bottler capper or bottle capping machine. Deep well chucks are the same as standard chucks except they have a secondary cavity that allows them to tig
The 26BUD4 is a urethane chuck liner 55 durometer for 38-46mm Caps that is inserted within a chuck. The chuck with the inserted liner is attached to the capping machine which grips the cap during the capping process.
The 26BAC4 is an aluminum chuck for bottle caps with a 38-46mm diameter, used in conjunction with a bottler capper or bottle capping machine. A bottle capping chuck is a tool that is attached to a capping machine that enables the capping machine to grip a cap.
The 26BSBC is a stainless steel bench clamp that is used in conjunction with the 26BESS bottle capper support stand. Use the bottle capping bench clamp to easily fasten the support stand to your table, which helps you avoid the need to screw the stand's base o
The 26BPSS is a handheld pneumatic bottle capper support stand that is used to mount a capping machine, capper balancer and air hoses. It has a 360° swivel about the column that makes the bottle capping process easier, allowing the operator to cap bottles
The 26BPSA is a handheld pneumatic capper torque stabilizing arm that helps hold the capping machine still during the capping process, thereby requiring the operator to exert less energy. By eliminating the required twisting torque, this protects the operator
How Handheld Pneumatic Bottle Cappers Work To cap a bottle, the operator places a cap loosely onto the bottle and then places the bottle onto the Anti-Rotation Mat which is positioned under the Bottle Capper. The bottle is now ready to be capped. (Using the Anti-Rotation Mat is optional.)
The Capping Machine is a push-to-start machine. The operator lowers the Bottle Capper with attached chuck down onto the cap to be tightened. When the chuck contacts the cap, the operator gives a gentle push down which starts the machine.
The Bottle Capper tightens the cap in less than a second and then automatically shuts off; it is like a pulse. The capper shutting off signals the operator that the cap is tight. The operator then allows the Capper Balancer to raise the machine back to the starting position ready for the next cap.
The Capper Balancer The Capper Balancer suspends the Bottle Capper over the bottle and cap to be tightened. The Balancer is spring loaded so the capper feels weightless in the hands of the operator. The Balancer allows the operator to lower the capper down onto the cap with very little effort. After the cap has been tightened, the Balancer raises the capper back to its initial position with no assistance from the operator.
The Anti-Rotation Mat With its adhesive backing, the Anti-Rotation Mat can be adhered to your work surface. The operator places the container to be capped onto the mat in preparation for capping.The Anti-Rotation Mat has a high friction surface that helps prevent the bottle from rotating during the capping process. Holding the bottle is very easy and only the slightest of effort is required.
Superior Torque Accuracy Compared to other handheld capping machines, the Pneumatic Capping Machine is known for having better torque accuracy and being more comfortable. It has an accurate clutch that shuts off automatically when the correct amount of torque is applied to the cap. This clutch is more effective than slip clutches, which have less torque accuracy and repeatability (they tend to slip and vibrate when the cap reaches the output torque).
Key Benefits:
Tightens caps from 10mm - 41mm
Torque range 2 - 30 inch lbs.
Audio/noise emissions 69 dB
Push-to-Start
Bottle Capper Automatically Shuts Off the Instant the Cap is Tight
Outstanding Repeatable Torque Accuracy
External Torque Adjustment Dial
Reversible - Can be Used as a De-Capper
Quick Change Chuck
Quiet and Comfortable to Use
Pneumatic Operation
Air Requirements: 90 PSI @ 3.0CFM
1 year warranty for all parts and labor
Package Includes:
Bottle Capping Machine
Capper Balancer
Coil Air Hose
Anti-Rotation Mat
*Optional Capping Machine Support Stand is available (not included)
*Optional Torque Stabilizing Arm is available (not included)
Disclaimer:
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility.
Additional Information
More Information
Color
Mixed
Dimensions
7.1" L
Pallet Pack
100 ea.
Weight
1.0 lbs.
Cap Range
10-41mm
Torque Range
2 - 30 in. Ibs.
Air Pressure
90 PSI @ 3.0CFM
Note:
** Chucks & Liners Required and Sold Separately below.
Q & A
Customer Questions
Can you ship internationally? Where are you located?
The Cary Company online ordering platform is only set up to ship within the United States. For international shipments, please contact us at 630.629.6600 or Sales@thecarycompany.com, and we will be happy to process your order. Our main warehouse and office are located in Addison, Ill. We also have warehouses in across the United States that you can see here. Thank you for choosing The Cary Company.
Did you find what you were looking for?
To request a quote, enter the Part# along with the quantity. To complete the request, fill out the entire form and hit "Submit".