Part # : 68W38H

38mm Foil Heat Induction Liner for PET/PVC, Clean Peel, FoilSeal™ S70A FS 3-19

Part # : 68W38H

38mm Foil Heat Induction Liner for PET/PVC, Clean Peel, FoilSeal™ S70A FS 3-19

FoilSeal™ S70A FS 3-19 Heat Induction Foil Innerseal, One-Piece, Clean Peel

The 68W38H is a 38mm one piece foam backed heat induction foil innerseal that will provide an aggressive bond with clean peel removal from PET and PVC containers. Heat induction seal (HIS) liners are a popular choice when an air tight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these are recommended for use with liquid products.
**Heat induction liners are non-returnable.
  • Quantity Qty Price
  • 1000 $0.091 ea.
  • 5000 $0.067 ea.
  • 10000 $0.057 ea.
  • 25000 $0.045 ea.
  • 50000 $0.038 ea.
Shipping Estimates can be found on the Cart page once you add products.
Minimum purchase quantity is 1000.
  • Quantity Qty Price
  • 1 $0.091 ea.

Availability: In Stock Quantity Available: 15000

Interested in larger quantities?

Request a Quote Request a Sample
Call Us: (630) 629-6600

Specifications
The 68W38H is a 38mm one piece foam backed heat induction foil innerseal that will provide an aggressive bond with clean peel removal from PET and PVC containers. Heat induction seal (HIS) liners are a popular choice when an air tight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these are recommended for use with liquid products.

Cap Liner Type:

FoilSeal™ S70A FS 3-19 Heat Induction Foil Innerseal Composition
One piece foam backed heat induction foil innerseal that will provide an aggressive bond with clean peel removal from PET and PVC containers.
MaterialStandardMetric
Backing.007".1778mm
Foil.001".0254mm
Heat Seal.0005".0127mm
FoilSeal™ S70A FS 3-19 Heat Induction Foil Innerseal

Disclaimer:

This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. The Cary Company does hereby disclaim any and all warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose or use. We are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us.

Additional Information

More Information
Neck Width 38 mm
Cap Liner FoilSeal™ S70A FS 3-19 (One-Piece Heat Induction Foil Innerseal)
Liner Compatibility PET, PVC
Sealing Characteristics Clean Peel
Country of Manufacture United States
Note: **Heat induction liners are non-returnable.
Q & A
Customer Questions
No Questions
Did you find what you were looking for?
Videos

Videos

You May Also Like