The 68W58P is a 58mm one piece top-tabbed induction seal with foam backing that features an easily opened clean peel design for use on PE (Polyethylene), LDPE, HDPE and PP (Polypropylene) containers. This liner features a built in center pull tab for ease of grip when peeling liners off. Heat induction seal (HIS) liners are a popular choice when an air tight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these are recommended for use with liquid products.
The 68W58P is a 58mm one piece top-tabbed induction seal with foam backing that features an easily opened clean peel design for use on PE (Polyethylene), LDPE, HDPE and PP (Polypropylene) containers. This liner features a built in center pull tab for ease of grip when peeling liners off. Heat induction seal (HIS) liners are a popular choice when an air tight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these are recommended for use with liquid products.
Cap Liner Type:
Lift 'n' Peel™ U5 LP-E Heat Induction Foil Innerseal Composition One piece top-tabbed induction seal with foam backing that features an easily opened clean peel design for use on PE and PP.
Material
Standard
Metric
PET Film
.001"
.025mm
PET Tab
.0005"
.013mm
Polyolefin Foam
.0045"
.114mm
Foil
.001"
.025mm
PET Layer
.0005"
.013mm
Heat Seal
.0015"
.038mm
Disclaimer:
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. The Cary Company does hereby disclaim any and all warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose or use. We are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us.
Additional Information
More Information
Neck Width
58 mm
Pallet Pack
100,000 ea.
Country of Manufacture
United States
Note:
**Heat induction liners are non-returnable.
Q & A
Customer Questions
Can I use a 58 mm "Lift & Peel Foil Heat Induction Liner" to seal a Ball 32 oz. regular mouth jar?
Thank you for your inquiry. We would not recommend using this or any other liner with a Ball 32 oz. regular mouth jar. These jars are specifically made for Ball regular mouth Mason jar lids (70 mm Ball® Regular Mouth Mason Jar Lids, Gold, Part #30WM70). Also, please note that this liner is made for high density polyethylene (HDPE) and polypropylene (PP) plastic containers (such as 4 oz. Black PP Plastic Jar, Straight Sided, 58mm 58-400,
Part #67W04B) and will not properly adhere to glass containers. Thank you for choosing The Cary Company.
Will this liner block an oil-based product in a 4 oz. jar with a 58mm (58/400) neck from leaking?
Thank you for your inquiry. Yes, this 58mm heat induction liner will fit most 58mm neck openings. Moreover, it provides an air-tight seal. However, please note that this liner is made for polyethylene (HDPE, LDPE) and polypropylene (PP) containers. Thank you for choosing The Cary Company.
Can you ship internationally? Where are you located?
The Cary Company online ordering platform is set up to ship within the United States as well as Canada. For other international shipments, please contact us at 630.629.6600 or Orders@thecarycompany.com, and we will be happy to process your order. Our main warehouse and office are located in Addison, Ill. We also have warehouses across the United States that you can see here. Thank you for choosing The Cary Company.
What type of machine is required for the application of these liners?
To apply this liner, a heat induction tool will be required for proper closure. Check our selection of Induction Sealing Machines.
Are heat induction liners compatible with liquids?
Yes, heat induction liners are compatible to use with liquids.
Can heat induction liners be used on glass or plastic?
Yes, heat induction liners can be used on glass and plastic. Please note, glass bottles must be paired with universal or glass-specific heat induction liners for a proper seal.
How is this lift 'n' peel heat induction liner applied to the bottle?
This lift 'n' peel heat induction liner requires a heat induction tool. Visit our selection of Induction Sealing Machines.
Can lift ‘n’ peel liners be used on glass or plastic bottles?
Lift 'n' peel liners are compatible with plastic bottles only.
Can I return lift ‘n’ peel heat induction liners?
No, these liners are non-refundable.
Do these lift ‘n’ peel induction liners provide an airtight seal?
Yes, these liners are a great choice when an airtight seal is needed.
Can these lift ‘n’ peel liners be used for liquids?
Yes, this is a popular liner choice for liquid products.
Did you find what you were looking for?
Videos
Videos
To request a quote, enter the Part# along with the quantity. To complete the request, fill out the entire form and hit "Submit".