30W3CI is a 1 quart (1 liter) 38mm 38-400 natural Cubitainer® insert. The insert material is a blend of linear low (LLDPE) and low density polyethylene (LDPE) plastic, and is designed for use with a corrugated fiberboard overpack. A reversible well design allows the opening to be raised or depressed for pouring and storage. The 30W3CI also has a non-glug design, which assures product flows from the insert in a continuous, uninterrupted stream.
The 30W3CC is a 1 quart Cubitainer® carton. This carton is meant to encase a cubitainer insert material. The 30W3CC is a rigid Kraft 200lb. single wall corrugated fiberboard overpack and ships flat. As a part of the Cubitainer system, it meets applicable D
The 68W38L is a 38mm (38-400 neck finish) White continuous thread plastic cap with a three-ply co-extruded polyethylene foam liner (F217 style). This closure is made of polypropylene (PP) plastic and fits our 38-400 vials, bottles, and jars. This plastic cap f
The 30W38F is a 38mm polyethylene plastic faucet with 8mm outlet and has a half-turn on/off handle for complete control and precision of the flow. The 30W38F can be used to dispense most non-flammable liquids from 38mm Cubitainers.
30W3CI is a 1 quart (1 liter) 38mm 38-400 natural Cubitainer® insert. The insert material is a blend of linear low (LLDPE) and low density polyethylene (LDPE) plastic, and is designed for use with a corrugated fiberboard overpack. A reversible well design allows the opening to be raised or depressed for pouring and storage. The 30W3CI also has a non-glug design, which assures product flows from the insert in a continuous, uninterrupted stream.
Cubitainer® Key benefits:
Volumes from 1 to 20 liters (1 quart to 5.3 gallons)
Natural or amber color
Molded-in handle
Special embossments
Fluorine treatment for improved chemical resistance
PVDC coating for oxygen permeation resistance
Customized decorated cartons
Standard LLDPE/LDPE blend or clean LDPE resin formulation for medical/diagnostic applications
Low density polyethylene (LDPE) is squeezable, has good chemical resistance and has a malleable feel. Unlike high density polyethylene, it is more translucent. Due to these factors, LDPE works best with packaging that is more flexible, such as produce bags and eye droppers. A common LDPE we carry is the boston round bottle, a popular choice within the personal care industry that works well for dispensing products. LDPE is not recommended for hot-filled applications but it works well in cold temperatures. Fill temperature should not exceed 111°F.
Disclaimer:
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. The Cary Company does hereby disclaim any and all warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose or use. We are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us.
Additional Information
More Information
Capacity
1 Liter, 1 qt.
Color
Natural
Material
LDPE
FDA Compliant
Yes
Neck Finish
38-400
Neck Width
38 mm
Dimensions
4-1/8" x 4-1/8" x 4-1/2"
Case Pack
144 ea.
Pallet Pack
1440 ea.
Note:
Cap sold separately.
Q & A
Customer Questions
Do you have caps and other closures available for this 38mm 38-400 container?
Compatible products that will fit a specific container are listed under the Related Products section of the product page. You can also search our website by the container’s neck finish. For example, 38mm 38-400 caps, pumps and sprayers are designed to fit 38mm 38-400 neck finish containers like this one. However, the best way to check compatibility is to order a sample of the cap to match to your container. You can learn more about finding a matching closure for your container in our Guide to Neck Finishes.
Can you ship internationally? Where are you located?
The Cary Company online ordering platform is only set up to ship within the United States. For international shipments, please contact us at 630.629.6600 or Sales@thecarycompany.com, and we will be happy to process your order. Our main warehouse and office are located in Addison, Ill. We also have warehouses in across the United States that you can see here. Thank you for choosing The Cary Company.
Did you find what you were looking for?
Videos
Videos
To request a quote, enter the Part# along with the quantity. To complete the request, fill out the entire form and hit "Submit".