89mm 89-400 Natural Plastic Dome Cap, Unlined

89mm Foil Heat Induction Liner for PET/PVC, Clean Peel, FoilSeal™ S70A FS 3-19

The 68W89F is a 89mm one piece foam backed heat induction foil innerseal that will provide an aggressive bond with clean peel removal from PET and PVC containers. Heat induction seal (HIS) liners are a popular choice when an air tight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these are recommended for use with liquid products.

89mm Foil Heat Induction Liner for HDPE/PP, Clean Peel, FoilSeal™ S70A FS 1-13

The 68W89H is a 89mm one piece foam backed heat induction foil innerseal that provides an aggressive bond with clean peel removal from PE (Polyethylene), LDPE, HDPE and PP (Polypropylene) containers. Heat induction seal (HIS) liners are a popular choice when an air tight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these are recommended for use with liquid products.

89mm Foil Heat Induction Liner for HDPE/PP, Clean Peel, FoilSeal™ .008" C1S FS 1-13

The 68W89I is a 89mm one piece foam backed heat induction foil innerseal that provides an aggressive bond with clean peel removal from PE (Polyethylene), LDPE, HDPE and PP (Polypropylene) containers. Heat induction seal (HIS) liners are a popular choice when an air tight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these are recommended for use with liquid products.

89mm Pressure Sensitive Liner, "Sealed for Your Protection" in Black

The 68W89J is an 89mm polystyrene white foam coated (PS-22) liner insert with a pressure sensitive coating. Pressure sensitive liners create an actual seal, providing an extra level of protection compared to a basic foam liner. They are best for dry products and can at times, work with thick liquids such as creams and sauces. Generally, these liners are not recommended for liquids and oils. Material is a styrene foam innerseal coated with a torque activated coating. It has adhesion to glass and plastic bottles with metal or plastic caps.

This liner is sized to fit industry standard 89mm neck finishes. Due to the variation in neck finish dimensions, particularly with glass bottles, we recommend testing the compatibility of this liner with your bottle/cap combination. To request a sample, please click here.

89mm Pressure Sensitive Liner, "Sealed for Your Protection" in Red

The 68W89L is a 89mm polystyrene white foam coated (PS-22) liner insert with a pressure sensitive coating. Pressure sensitive liners create an actual seal, providing an extra level of protection compared to a basic foam liner. They are best for dry products and can at times, work with thick liquids such as creams and sauces. Generally, these liners are not recommended for liquids and oils. Material is a styrene foam innerseal coated with a torque activated coating. It has adhesion to glass and plastic bottles with metal or plastic caps.

This liner is sized to fit industry standard 89mm neck finishes. Due to the variation in neck finish dimensions, particularly with glass bottles, we recommend testing the compatibility of this liner with your bottle/cap combination. To request a sample, please click here.

89mm Single-Tab Foil Heat Induction Liner for Glass/HDPE, Clean Peel, FoilSeal™ S70A FS 7-6S

The 68W89T is an 89mm one piece single tab heat induction foil innerseal (foam polyethylene cap liner) that features an easy to open design for use on glass containers. Heat induction seal (HIS) liners are a popular choice when an airtight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these liners are recommended for use with liquid products. This liner is applicable with products like edible oils, food and beverages, vitamins, shampoos, and spices.

89mm Single-Tab Foil Heat Induction Liner for PET/PVC, Clean Peel, FoilSeal™ S70A FS 3-19

The 68W89Y is an 89mm one-piece single tab heat induction foil innerseal (foam polyethylene cap liner) that features an easy to open design for use on PET and PVC containers. Heat induction seal (HIS) liners are a popular choice when an airtight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these liners are recommended for use with liquid products. This liner is applicable with products like edible oils, food and beverages, vitamins, shampoos, and spices.

89mm Tri-Tab Foil Heat Induction Liner for Glass/HDPE, Clean Peel, FoilSeal™ S70A FS 7-6S

The 68W8GT is an 89mm one piece tri-tab heat induction foil innerseal (foam polyethylene cap liner) that features an easy to open design for use on glass containers. Heat induction seal (HIS) liners are a popular choice when an airtight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these liners are recommended for use with liquid products. This liner is applicable with products like edible oils, food and beverages, vitamins, shampoos, and spices.

89mm Foil Heat Induction Liner for Glass/HDPE, Clean Peel, FoilSeal™ .008" C1S FS 7-6S

68W90G is a (FoilSeal™ .008” C1S FS 7-6S) 89mm one-piece board-backed heat Induction foil innerseal which will provide an aggressive bond with clean peel removal from treated glass and PE (HDPE, LDPE) containers. Heat induction seal (HIS) liners are a popular choice when an airtight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure-sensitive liners, these are recommended for use with liquid products.

89mm Pressure Sensitive Liner, No Print

The 68W90L is an 89mm polystyrene white foam coated (PS-22) liner insert with a pressure sensitive coating. Pressure sensitive liners create an actual seal, providing an extra level of protection compared to a basic foam liner. They are best for dry products and can at times, work with thick liquids such as creams and sauces. Generally, these liners are not recommended for liquids and oils. Material is a styrene foam innerseal coated with a torque activated coating. It has adhesion to glass and plastic bottles with metal or plastic caps. (No Print on top)

This liner is sized to fit industry standard 89mm neck finishes. Due to the variation in neck finish dimensions, particularly with glass bottles, we recommend testing the compatibility of this liner with your bottle/cap combination. To request a sample, please click here.

89mm Foil Heat Induction Liner for HDPE, Tamper Indicating, FoilSeal™ S70A FS M-1

68WF89 is a FoilSeal™ S70A FS M-1 63mm one-piece foam-backed heat induction foil innerseal which will provide a tamper-evident bond to PE (HDPE, LDPE) containers. Heat induction seal (HIS) liners are a popular choice when an airtight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure-sensitive liners, these are recommended for use with liquid products.

89mm F-217® Three-ply Foam Liner

The 68WL89 is a 89mm F-217® liner made of three layers: a thin soft polyethylene foam core sandwiched between two clear layers of LDPE film. F-217 has become the industry standard due to its all purpose compatibility, resilient, compressible seal, cleanliness (no pulp dust) and economy. F-217 liners are taste and odor resistant, and have a low moisture transmission rate, meaning they prevent moisture from entering the bottle and affecting products. F-217 is a brand-name and tends to be used interchangeably with foam liner. However, F-217 actually performs better than a regular foam liner. Like the foam liner, this also does not create an airtight seal.