70mm 70-400 Natural Smooth Plastic Cap, Unlined

4 oz. Natural Round Scoop w/2.2" Handle

This 4 fl. oz. Natural Round Scoop with 2.2" Handle was designed for scooping various powders such as baby formulas, nutritional powders and household chemicals. The scoop provides accurate measurements and features a 2.2" handle for easy grip and control. FDA approved, this scoop can be used with an assortment of products from the food and beverage category.

94 cc Natural Round Scoop w/2.2" Handle

This 94 cc Natural Round Scoop with 2.2" Handle was designed for scooping various powders such as baby formulas, nutritional powders and household chemicals. The scoop provides accurate measurements and features a 2.2" handle for easy grip and control. FDA approved, this scoop can be used with an assortment of products from the food and beverage category.

4 oz. Natural Round Scoop w/1 oz. Graduation Markings

This 4 fl. oz. Natural Round Scoop with 1 oz. Graduation Markings was designed for scooping various powders such as baby formulas, nutritional powders and household chemicals. The scoop provides 1 oz. graduation markings for accurate measurements and features a 2.2" handle for easy grip and control. FDA approved scoop can be used for an assortment of products from the food and beverage category.

70mm Foil Heat Induction Liner for HDPE/PP, Clean Peel, FoilSeal™ S70A FS 1-13

The 68W70F is a 70mm one piece foam backed heat induction foil innerseal that provides an aggressive bond with clean peel removal from PE (Polyethylene), LDPE, HDPE and PP (Polypropylene) containers. Heat induction seal (HIS) liners are a popular choice when an air tight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these are recommended for use with liquid products.

70mm Foil Heat Induction Liner for PET/PVC, Clean Peel, FoilSeal™ S70A FS 3-19

The 68W70H is a 70mm one piece foam backed heat induction foil innerseal that will provide an aggressive bond with clean peel removal from PET and PVC containers. Heat induction seal (HIS) liners are a popular choice when an air tight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these are recommended for use with liquid products.

70mm Pressure Sensitive Liner, "Sealed for Your Protection" in Red

This 70mm polystyrene white foam coated (PS-22) liner insert incorporates a pressure sensitive coating. Although not a form of tamper evident seal, pressure sensitive liners create a seal that provides an extra level of protection to container contents, as compared to a basic foam liner. They are best for dry products and can at times, work with thick liquids such as creams and sauces. Generally, these liners are not recommended for liquids and oils. Material is a styrene foam inner seal coated with a torque activated coating. This liner offers adhesion to glass and plastic bottles with metal or plastic caps.

This liner is sized to fit industry standard 70mm neck finishes. Due to the variation in neck finish dimensions, particularly with glass bottles, we recommend testing the compatibility of this liner with your bottle/cap combination. To request a sample, please click here.

70mm Single-Tab Foil Heat Induction Liner for Glass/HDPE, Clean Peel, FoilSeal™ S70A FS 7-6S

The 68W70T is a 70mm one piece single tab heat induction foil innerseal (foam polyethylene cap liner) that features an easy to open design for use on glass containers. Heat induction seal (HIS) liners are a popular choice when an airtight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these liners are recommended for use with liquid products. This liner is applicable with products like edible oils, food and beverages, vitamins, shampoos, and spices.

70mm Single-Tab Foil Heat Induction Liner for HDPE/PP, Clean Peel, FoilSeal™ S70A FS 1-13

The 68W71F is a 70mm one piece single-tab heat induction foil innerseal that will provide an aggressive bond with clean peel removal from PE (Polyethylene), LDPE, HDPE containers. Heat induction seal (HIS) liners are a popular choice when an airtight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these are recommended for use with liquid products. This liner is applicable with products like edible oils, food and beverages, vitamins, shampoos, and spices.

70mm Foil Heat Induction Liner for Glass/HDPE, Clean Peel, FoilSeal™ .008" C1S FS 7-6S

68W71G is a (FoilSeal™ .008” C1S FS 7-6S) 70mm one-piece board-backed heat Induction foil innerseal which will provide an aggressive bond with clean peel removal from treated glass and PE (HDPE, LDPE) containers. Heat induction seal (HIS) liners are a popular choice when an airtight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure-sensitive liners, these are recommended for use with liquid products.

70mm Pressure Sensitive Liner, No Print

The 68W72L is a 70mm polystyrene white foam coated (PS-22) liner insert with a pressure sensitive coating. Pressure sensitive liners create an actual seal, providing an extra level of protection compared to a basic foam liner. They are best for dry products and can at times, work with thick liquids such as creams and sauces. Generally, these liners are not recommended for liquids and oils. Material is a styrene foam innerseal coated with a torque activated coating. It has adhesion to glass and plastic bottles with metal or plastic caps. (No Print on top)

This liner is sized to fit industry standard 70mm neck finishes. Due to the variation in neck finish dimensions, particularly with glass bottles, we recommend testing the compatibility of this liner with your bottle/cap combination. To request a sample, please click here.

70mm Foil Pressure Sensitive Liner, "Sealed for Freshness" in Black (Uni-Foam™ PS-F1)

The 68W74L is a 70mm polystyrene foam aluminum foil (Uni-Foam™ PS-F1) liner insert with a pressure sensitive and torque activated coating. Pressure sensitive liners create an actual seal, providing an extra level of protection compared to a basic foam liner. They are best for dry products and can at times work with thick liquids such as creams and sauces. Ideal for packaging dry products from spices, food, to medicine. These liners are not recommended for liquids and oils or any wet product. The Uni-Foam™ PS-F1 pressure sensitive foil liner has adhesion to glass and plastic bottles with metal or plastic caps.

This liner is sized to fit industry standard 70mm neck finishes. Due to the variation in neck finish dimensions, particularly with glass bottles, we recommend testing the compatibility of this liner with your bottle/cap combination. To request a sample, please click here.

70mm Tri-Tab Foil Heat Induction Liner for Glass/HDPE, Clean Peel, FoilSeal™ S70A FS 7-6S

The 68W7GT is a 70mm one piece tri-tab heat induction foil innerseal (foam polyethylene cap liner) that features an easy to open design for use on glass containers. Heat induction seal (HIS) liners are a popular choice when an airtight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these liners are recommended for use with liquid products. This liner is applicable with products like edible oils, food and beverages, vitamins, shampoos, and spices.